Everything posted by CAL. .30 M1
-
Such a sexy beast...
-
Sold: Remington 725 - 30-06 Bolt Gun
Made for a very short time 1958-61 - as shown- great bore, solid action, weaver rings with a Weaver 4X scope. Will come with ammo on sleeve - surplus to my needs. Research on the rifle yields interesting information and a cult like following they say. First I will take it get's it followed by a PM - transfer is on you and/or will ship in state to your FFL on your dime. Asking $ 425 OBO (which is what I have in it minus the scope)
-
Shughart M14 clone....
Thank you ! They look like they are well built ! Appreciate the heads up
-
SOLD: Polish RADOM P64 9x18 Makarov
Sold please close
-
If NJ was a CC state this would be my EDC
-
Shughart M14 clone....
Well - it was a fun time at the range this past Sunday! Thoughts - - It felt good and solid - The weld of the face to the stock was higher than I liked, more of a chin weld - lower rings needed (more on that later) - SA mount held like a rock and no loosening of the mount was visible - the pre-shooting measurement of the mount position was the same after the range - The zero held across 60plus rounds - amazingly - why? When I got home I noticed that the cheap 30MM split rings I used - well one cracked Given that - I ordered new 30MM rings - an yes they were vortex - LOL - I guess I will never learn. I must say that the rifle in this configuration is fast, nimble and truly quick on target. This is going to have to be upgraded to an Aimpoint and proper steel mounts - maybe Christmas to me.... Anyone have any feeling about the Aimpoint ACO https://www.aimpoint.com/product/aimpoint-aco/ Also anyone have a good line on steel 30MM rings - or heavier duty aluminum that aren't made offshore?
-
New springfield bolt
Add the guy who get's it will balk at the price of the glass, mounts and work needed on the glass/mounts alone - to really put it through it's paces ! Saw a M1A Super Match Mcmillan in an M21 config - it had a Tasco scope on it............
-
Pinned and welded muzzle device
That is all irrelevant - it is not what is commonly done and with the proper breaker bar - I bet I could get it off easy peasy. I have seen work done this way and it is substandard. You need to drill a hole into the barrel threads to a suitable depth - the pin prepped (rounded) so it sits flush in the hole - then welded over. That way when and *if* someone ever took a long breaker bar - the pin, if spun with the muzzle device, would destroy the threads - thus rendering the barrel unable to accept another muzzle device. The most 'permanent' way would be to silver solder it on.... However, for our application here - the above method - simple pin/wled - would suffice - not torque and jb weld The application of JB Weld in any form or fashion to adhere a muzzle device, is "rube goldberg" stuff... HOW CAN I REMOVE J-B WELD AFTER IT IS FULLY CURED? When fully cured, J-B Weld can only be removed by grinding or filing it off, or by directly heating the product above the 600º maximum temperature threshold. All the info above is my *opinion* and like assholes, everyone has one - YMMV
-
Pinned and welded muzzle device
Fail Double fail. Imo The pin must anchor to the threads via a hole in the barrel The depth of the hole should be sufficient to destroy the threads should be twisted off .. Imo
-
REMOVED: Ultradot Matchdot (MODS CLOSE)
Reduction a cnote takes it.
-
SOLD: (REDUCED) - 1950 Browning Auto 5 12G Semi
Bump price reduction...450..next is back in safe
-
SOLD: Polish RADOM P64 9x18 Makarov
Made in 1969 at the Radom factory. Double action pistol with decocker and loaded chamber indicator Original useless sights removed and modified for up close contact self defense Stupid reliable in a small harder hitting caliber. No slide bite as with ppk's..in anemic 32 Comes with all as shown and the mags are getting harder and harder to find and will be unobtanium someday...gun is POA/I at self defense ranges...this is NOT a target pistol Asking $300.00, obo - that is $175.00 for the pistol, $25.00 per mag (online they go for double at times. If you need a no nonsense self defense pistol - this is it. Will add a holster and a box of 9x18 ball for an additional $35.00. The first i will take it gets it followed by a pm... will ship to your 01ffl minus ammo, on your dime and or will hold for permits at my ffl..transfer and nics is on you
-
FS/FT: Uppers
We are not supposed to have discussions in the FOR SAEL FORUM - however quick note. The C7/C8 is a Canadian rifle manufactured by Colt Canada (formerly Diemaco prior to 2005) The feature set of the C7 is a Colt A1 upper - not slick sided - has the brass deflector - most use the grenade launch profile barrel, as opposed to the pencil 1/12 barrels of the original A1's - as well as some other minor changes. Great Website - http://retroblackrifle.com/ http://bpullignwolnet.dotster.com/retroblackrifle/ModGde/4nGde/C7.html http://bpullignwolnet.dotster.com/retroblackrifle/ModGde/4nGde/C8.html
-
FS/FT: Uppers
FYI C7 Style upper.......
-
Such a sexy beast...
....1951ish..... I think She's broken though.... Safety on, hammer down? What the...? Some would say a fix in search of a problem....so far it is interesting and has provided a positive safety and a clean break.. Range experience coming...
-
SOLD: (REDUCED) - Glock 19 Gen 4
SOLD PLEASE CLOSE
-
REMOVED: Ultradot Matchdot (MODS CLOSE)
Ultradot match dot..selectable moa dot 2 4 6 8 Don't need it...works perfectly The first unconditional ill take it gets it followed by pm Asking 185 plus shipping ...
-
Browning Hi Power....
...yeah karl and i are going to do the work...gotta change the rear sight options as it will interfere with the extractor channel..was afraid of that.
-
Browning Hi Power....
Don williams
-
Browning Hi Power....
Gets great reviews and was referred to me by my first choice. Hey hope ur wife is good... !
-
Browning Hi Power....
Well its settled.... she is off this week to Karl Sokol for some work ..... Prolly won't be back for about 5 months.... Still working that out.. New front and rear sights Complete dehorn Reliability tuning Bevel magwell Stipple front and rear grip straps Test fire and tune for POA/I with 147gr ammo and the new sights. Mountain tough refinish... Sometimes you just gotta do it.....
-
New Pick up
- muzzle loader hunting
I found the sabots in my sidelocks percs and flints not to be so accurate. I always had luck with a straight up patched round ball But then again i never shot inlines or whatever new fancy stuff- New Pick up
Most recruits need training right? There is a collecting niche of .22 military trainers...- muzzle loader hunting
Ml season is almost as good as bow... but you need to buy the permits for ML...AND have a NJ rifle permit...5 bucks as i recall...foe the rifle permit.... You can hunt all Jan..on ML...as i recall... The compendium had the data... 45 or better... I hunted with a 54.... 45 too light..and 50cal 45 sabots suck - muzzle loader hunting