Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Any gunsmiths or machinists with a lathe out there?

Featured Replies

So it looks like I'm going to have to modify the piston shaft in my Adams Arms piston kit for my AR in order for it to work with the Daniel Defense rail and have the recommended clearance between the end of the shaft and the gas block.

 

I need to take 0.020" off a hardened steel rod (the piston shaft). The shaft is 0.17" in diameter at the end where the metal needs to be removed, 0.250" in diameter at the mid point of the shaft and 0.425" at the opposite end. Shaft is ~11 1/8" in overall length.

I believe Firearms Guild in Rahway has a lathe also.

Come and use mine free Or show me what you need done and I will do it while your here

it will take up to 5/8 shaft

Im in lake hopatcong and will be home sunday

  • Author

Ted, offer much appreciated, would like to take you up on it today. Will PM you for tel #.

  • Author

Many thanks again Ted for taking some time to help me out! He had the idea of taking off a bit at a time with a belt sander and test fitting instead of chucking it up in the lathe. Worked out great.

My pleasure Doug

The table top belt/disk sander is a great thing to have

  • 4 weeks later...
I believe Firearms Guild in Rahway has a lathe also.

 

 

I spoke with Firearms Guild this morning they told me there is a 4 week backup for gunsmithing.

Good job!

 

Hardened steel is hard to cut on a lathe anyway. If it is a long rod, I may have pushed it off center instead of cutting it. .020 (.010 deep cut) is also sometime difficult. Grinding was the way to go. I successfully ground a precision angle on a collet using a lathe and a Dremel sanding drum as a counter-rotating tool.

 

No, I am not a real machinist but I like to pretend I am.

  • 5 months later...

Good job!

 

Hardened steel is hard to cut on a lathe anyway. If it is a long rod, I may have pushed it off center instead of cutting it. .020 (.010 deep cut) is also sometime difficult. Grinding was the way to go. I successfully ground a precision angle on a collet using a lathe and a Dremel sanding drum as a counter-rotating tool.

 

No, I am not a real machinist but I like to pretend I am.

 

But you are correct. Hardened steel does not machine well. It's much easier to abrasively cut it. A surface grinder with a rotating collet holder would be ideal for extreme precision.

  • 4 weeks later...

The only smith I would trust in NJ is Bob White of Shooters Corner in Lake Hopatcong.

The only smith I would trust in NJ is Bob White of Shooters Corner in Lake Hopatcong.

 

tell me about his shop ? I'm in Lake Hopatcong

  • 1 year later...

 

 

tell me about his shop ? I'm in Lake Hopatcong

 

I went there yesterday to drop off a rifle for minor work. The shop is in his house in a separate area. Its in a residential street. Drove by it three times before I saw it. No big sign outside that screams gun shop.

 

Real nice guy with lots and lots of rifle experience. Talked to him for about 40 minutes about rifles in general and what needed to be done on mine of course. This is the first time I'm using him. Will let you know how it goes.

tell me about his shop ? I'm in Lake Hopatcong
Bob White is a pretty cool guy as far as "benchrest" shooters go... He is in the "benchrest hall of fame" and is renowned internationally. (his wife complains about getting calls in the middle of the night from Austrailia)...LOL Bob get's good prices for his stuff but, does stuff nobody else does with a precision that not many can attain. Great guy and even if you don't have a reason to do business with him, he's a great guy to know.

renowned = having a widespread, esp good, reputation; famous

 

renouned = to be nouned, AGAIN! Damn you grammar, I've been NOUNED!

renowned = having a widespread, esp good, reputation; famous

 

renouned = to be nouned, AGAIN! Damn you grammar, I've been NOUNED!

 

Fixed...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.