Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Interest in an Aimpoint Micro T1 Group Buy

Featured Replies

Guys, I am considering doing an aimpoint Micro T1 Group Buy.

 

Everyone is looking for quality Red Dots. I am in a postion to bring you top quality at a very good savings. I can NOT post that price due to MAP restriction so I will need to figure out how to distribute that price. Heres a few details. It is a group buy for an Aimpoint T1 Micro, factory new. It will be mounted on a AWP quick release mount. This mount and QR system was developed at the Request of SOCOM. You can NOT buy this mount comercially ANYWHERE! In fact about the only way you have ever even seen it is if your in 5th Group Special Forces(or on one of my rifles).

 

Whats required?

A little patience and money.

 

How it works?

The money is collected.

We buy the Micro's

Make the mounts

Assemble an deliver.

 

The patience part will be required because of manufacture time of the mount. Its hard to put a time frame around it until I know the count. Hard coat anodising is what eats up some time. The savings will make the wait worth it.

 

DUE TO MINIMUM ADVERTISED PRICING RESTRICTIONS WITH AIMPOINT I CANT POST PRICE. PM ME FOR PRICE. I WILL SEND THEN DELETE TO KEEP MY PM BUCKET FROM FILLING. IF I DONT GET BACK TO YOU EITHER EMAIL ME OR PM ME AGAIN. THANKS

[email protected]

>>>>>>

 

 

Buyers IN

Proactive

Matty

Jimmy AGR

Devils Advocate

  • Replies 81
  • Views 10.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

Have you been reading my posts? If I new the price was (ballpark) I'd be game!

I would definitely be interested. Like Ray, I'll definitely need a figure before I can commit.

What type of numbers were you thinking would qualify for a "group" buy?

Is the mount a lower 1/3 co-witness, or a true co-witness, and what is the weight of the mount? Thanks, and I am definitely interested.

  • Author

I'll get the weight. Its not much. For those that may be interested but want a lower mount for say a USC, we made these for the HK UMP's. I will check but substitution is likely not a problem. I will have one next week. I will take a bunch of pics on an AR. I'll try and do a through the optic shot.

 

v3.jpg

This is a terrific opportunity to get a rare opportunity to buy a top notch, one of a kind optics and mount package. Shane is an expert in this field, and if this mount is anything like another one that I had an opportunity to look at, a premier solution.

 

A few questions Shane... the Aimpoint T1, are there magnifier options avail for it?

 

And for the newbies... why is this mount better over the integrated picattiny one.

  • Author

Thanks for the kind words. I think I would likely dodge the expert title and accept well informed :)

 

The mag option question is a very good one. Currently we do not make a stand alone magnifier mount. We DO have an integrated solution but.... that one is still under wraps pending acceptance yada yada yada so I dont think its an option I can bring to the table at this time.

 

The major diff between the factory clamp and this one is that this one is quick release. You can get it on or off in seconds (with very good repeatability)as opposed to the side clamp/screw mount. Also noteworthy. The person who designed this mount is one in the same that designed the rails and rings for the FN Sniper Rifle contract for the FBI. He is in my mind the utmost authority in picatinny rail clamping design. His rings and rail set the record in the FBI drop test surviving no failure for over 90 drops to concrete IIRC. Other major components failed the rings and rails did not due to the superior clamping design.

 

I hope that anwers at least some of the question.

  • Author

What I would need to know is what hight optical centerline is on the mag mount you want to use to make sure it is in allignment with the Aimpoint mount. As long as they are in alignment, you can use any magnifier mount you like.

i'm interested! dependent upon cost.

Count me as Interested Shane... mount looks Spectacular BTW..really nice work.

I'm interested but can't commit until I know the cost.

Shane is this a true co-witness mount? I was looking at the H-1 but if the price point is good I am interested.

I will follow suit with everyone.

  • Author

It is true cowit. Although I prefer lower 1/3 for full size, the reduced real estate of the micro, true makes sense.

The true co-witness is a little irksome for me, but mark me down as interested. Is there any possibility of making the group buy a mixed T1/H1 buy?

 

Ray - that low mount pictured on the Kriss might be perfect for your CX4.

  • Author

I would prefer to keep it simple. We could perhaps do an H1 buy in the future.

The T1 is night vision compatible, and, if memory serves me, can be submerged for greater depths. There used to be some more differences in the early H1s (i.e. different finish, different rail interface), but they changed that in later revisions.

 

ETA: Correction - I just checked and the H1 and T1 still have different rail interfaces. The H1 comes with a Weaver mount and the T1 comes with a picattiny mount. Kind of a moot point tho since this deal includes the mount.

The true co-witness is a little irksome for me, but mark me down as interested. Is there any possibility of making the group buy a mixed T1/H1 buy?

 

Ray - that low mount pictured on the Kriss might be perfect for your CX4.

 

I thought the same thing. Shane is gonna read this and say, "hell yeah it'll co-witness!"

I'll bite--count me in for 1 with the lower mount---

  • Author

OK lets kick this thing in the a**. Heres some more pics.

 

 

 

Im going to start listing the definite ins on the first post

 

t1.jpg

 

t1b.jpg

 

lwrct1.jpg

For the price mentioned in the other thread, and as long as it is 1/3rd co-witness, I am interested and committed.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.