Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A new addition to the family and a great day at the range!!!

Featured Replies

Greetings,

 

Was at the Bullet Hole yesterday and bought a used Glock G26. It looks to be a Gen2, but I'm not familiar enough w/ the G26's to know. It definitely has the slide color of the Gen2's, but it has finger grips. Alas, I ramble...

 

Glock family shot

P3060022.jpg

Top to bottom

Gen2 G17

Gen2 G19 (w/ Gen3 slide)

Gen2? G26 (the new BABY!!)

Gen4 G23

Gen3 G19

 

I ran into fellow NJ Forum member Cylinder Head and his brother while processing the paperwork on the G26. I know from reading CH's posts, he's got a Knights Reed SR15E3 w/ some nice upgrades and other very fine choices in his firearms. To my delight, he had this rifle w/ him and he let me put a few founds through it. This rifle is also sporting a Battlecomp and Gieselle SSD ( I think that was the model of the trigger...it had a flat bar vs. curved trigger). Extremely minimal recoil as the result of the Battlecomp and KAC's longer than midlength gas system for its 16" barrel. The trigger was VERY nice as well. If I were going for a true top of the line HD 5.56mm rifle, this would be a the top of list. Thanks Cylinder Head!!!

 

The G26

 

I had an opportunity to shoot a G26 on another occasion at the Bullet Hole. I was shooting the Gen3 G19 that day and it provided for a good comparison to the G26. For starters, I thought recoil control was OUTSTANDING. It was also very easy to be accurate on it. The owner of this G26 was new to the sport of the shooting and was having a less than stellar performance in shooting his pistol. In fact when he let take 5 rnds on it, he mentioned he didn't think it was too accurate. Fortunately, I helped alleviate the question of the guns' accuracy for him w/ a sub 1.5" group at 10 yards. All kidding aside, after putting 250 rnds on the one I bought yesterday, I feel it is mechanically just as accurate as it's bigger brothers, yet surprisingly for it's shorter sight radius and grip, it still is very easy to be accurate on. After I got warmed up w/ a few 5 rnd strings, I was keeping pretty consistent averaging around 2" groups at 12 yards or so. In my last dozen or so outings at the BH, I've been trying to make a bigger effort to practice some kind of defensive type shooting. Of any pistol in my experience, the Gen3 G19 allows for my fastest shooting w/ what I'll describe as defensive quick acquisition accuracy. From low ready, bring pistol up and put 2 shots COM in a 4-5" circle at 15 yards. The G26 was very adept at this drill. I saw Cylinder Head practicing 2 in the chest and 1 to the head w/ his HK45 (you have got to love the big holes a .45 makes) and was mimicking this drill w/ the G26. I was VERY happy w/ the performance of this pistol w/ this exercise. I think I got very lucky w/ this Glock as it looks like it has a stock trigger w/ THE nicest example of a stock Glock trigger I've yet experienced. Cylinder Head mentioned the relative smoothness/lightness of the trigger as well. CH also mentioned the unforgiving sight radius. While that was true, I found if I could get a good lock on the grip, which seemed very easy to do on this pistol, I could pull a nice group.

 

At some point, I plan on getting a Gen3 G17 w/ the intention to reshape the grip w/ the hump of the G26 and chop the grip down to accept G19 mags. I firmly think that the G26 allows for great control and accuracy as compared to the G19 and especially, the G17 in proportion to the gun's size. The palm area of my hand from between the centerline of the palm and the web of my hand really locks onto the hump of the G26, feels a little vague on the G19 and really gets lost on the G17. Although, the Gen4 series seems to have better proportions for my hand geometry.

 

Some pic comparisons of the various humps of the G19 and G17 as compared to the G26. Luv me some HUMP!!!

 

You can barely see the slightly raised hump of the G26 behind the G19 here.

P3060026.jpg

P3060025.jpg

 

The hump of the G26 is more noticeable when compared to the G17 over it.

P3060027.jpg

 

 

Other notes...

 

There were a variety of LEO's at the range. I struck up a conversation w/, I believe he said he was a Mass Transit cop for NJ and was issued a G21SF. I wish I got his name to thank him for letting shoot a few rounds on it, as well as a very nice Colt Python 357 nickled w/ a really really nice trigger. I was most impressed by the G21SF though. I also own a SA Loaded 1911 and an HK USP45. I REALLY liked the G21SF. The slight revisions in the grip, as compared to the regular G21, perfectly fit my hand. Recoil was MUCH less than I was anticipating. It felt like a torquier 9mm. I've been shooting a lot of .40 S&W lately, but the .45 recoil in the G21SF felt VERY soft. I thought accuracy was excellent as well.

 

All in all a good day, and good to see Cylinder Head again as well.

Let me guess...you like Glocks. Nice pics and thanks for sharing. I just sold my Glock 26. I like it, but never shoot it. Very nice pistol and it has a new home. I also have a G23 courtesy of the US government.

Were you at the left end of the range? I think I (and Cagefighter) where there too. If the Python owner was a black guy then it we where there too.

 

I shot a 26 last month and it totally changed my mind on how it should shoot and feel. I really like it, and I might just scoop one up. If you compare a XD sub-compact to the baby Glocks, recoil and handling are totally different. The Glock26 is a great little gun. Good read and post sir, and thanks for the pics!

  • Author

Let me guess...you like Glocks. Nice pics and thanks for sharing. I just sold my Glock 26. I like it, but never shoot it. Very nice pistol and it has a new home. I also have a G23 courtesy of the US government.

 

Yeah, right now I'm in my Glock phase. I couldn't stand the pistols when I 1st tried a Gen2 G23 in '94. Bought a Gen3 G22 in '97 or so, but sold it. Bought the Gen2 G19 and finally found one that worked for me. My next Glocks are a Gen4 G19, G21SF, maybe a Gen4 G35 and possibly the Gen3 G17 for customization. Having said that, an HK P30 is soon on the horizon. I picked up an M&P40 and installed an Apex sear and polished the internals. I'm very curious to shoot a MP9C and MP45.

 

How do you like your G23? Have to say, I LOVE the Gen4 G23 I picked up in Dec. Alleviates the snap just a little bit, but the redesigned grip frame and texture ROCK!!! Had to do a little trigger work and put on night sights, but now it's a great pistol. 2nd shot recovery is very good to excellent. Definitely better than my buddies Gen2 G23.

 

 

Were you at the left end of the range? I think I (and Cagefighter) where there too. If the Python owner was a black guy then it we where there too.

 

I shot a 26 last month and it totally changed my mind on how it should shoot and feel. I really like it, and I might just scoop one up. If you compare a XD sub-compact to the baby Glocks, recoil and handling are totally different. The Glock26 is a great little gun. Good read and post sir, and thanks for the pics!

 

Hey!!! Yup, I was to the left of you and the Python owner was a black guy. Extremely nice pistol that Python is. Also, the G21SF ROCKS!!! I've been toying w/ the idea of getting one since the SF model came out. Thanks for the opportunity to put a few rounds through as it really solidified my desire to get one. Again, thanks and excellent meeting you guys

Ha! We didn't meet and I don't own a 21. Funny though, as I was the one shooting the 590 and gave it to the cop to shoot. He then shot it, placed it against the wall and it fell. Thank the lord for parkarized finishes, as it would've scratched any other gun.

We were also shooting my LCR and Cagefighters 19. Next time my friend, we will shoot together.

im still wondering why RayRay was afraid of shooting my G27_Gen4. scared? :icon_mrgreen:

Love 'em or Hate 'em. Good luck!

The G17 slide on a G19 frame is an excellent conversoin that is not done enough.

  • Author

Love 'em or Hate 'em. Good luck!

The G17 slide on a G19 frame is an excellent conversoin that is not done enough.

 

You can put a G17 slide on a G19 frame? I would think the shorter dust cover of the G19 wouldn't cover the bottom of the G17's longer slide. I've seen a bunch of G17's w/ the grip cut down to fit G19 mags.

Great seeing you again Rauchman, and thanks for letting me shoot the baby Glock! That thing was a blast, so tiny and yet zero muzzle flip and very accurate. After pulling two low left I was able to put a decent group together. I know you like your 9's, so you'll love a P30.

 

Now when are you getting a KAC?

 

P.S.- Just read that the thing was used?? Wow, you'd never know. Looked NIB to me, good deal.

  • Author

Great seeing you again Rauchman, and thanks for letting me shoot the baby Glock! That thing was a blast, so tiny and yet zero muzzle flip and very accurate. After pulling two low left I was able to put a decent group together. I know you like your 9's, so you'll love a P30.

 

Now when are you getting a KAC?

 

P.S.- Just read that the thing was used?? Wow, you'd never know. Looked NIB to me, good deal.

 

Greetings Cylinder Head!!! Excellent seeing you at the range Sat. Yes, the G26 was in the used cabinet at the BH and was $400. Not a bad price for a great little pistol. I saw it there on my last shoot 2 wks or so ago, and it's been like an itch that couldn't be scratched. Was also checking out the used HK P2000SK that they had in the used case. I often have a conversation w/ my buddy that goes .... if you had a fire and lost all your guns, what would you replace them with. My answer is 3-4 HK P30's and 3-4 KAC SR15 E3's (have to consider the wife, you know :icon_e_biggrin: ) and a crap load of ammo. I'm out of town for a couple of weeks. Let me know the next time your heading to the BH. You, me, Ray Ray, Cagefighter and the rest of the gang will meet up for a shoot.

 

As for the KAC, right now I want to try building an AR. Already have the lower assembly and now have to start ordering the expensive parts... barrel, hand guard and what not. I'm leaning towards a Centurian Arms barrel in either a 14.5" or 16" midlength configuration, probably the 16". After that project is over, money will be saved for the KAC!!! As for yours though, that is one sweet rifle. Recoil is so minimal and that trigger is very very nice. Also, just the feel of the controls and what not, feel so precise on the KAC. Very choice rifle!!!

Other notes...

 

There were a variety of LEO's at the range. I struck up a conversation w/, I believe he said he was a Mass Transit cop for NJ and was issued a G21SF. I wish I got his name to thank him for letting shoot a few rounds on it, as well as a very nice Colt Python 357 nickled w/ a really really nice trigger. I was most impressed by the G21SF though. I also own a SA Loaded 1911 and an HK USP45. I REALLY liked the G21SF. The slight revisions in the grip, as compared to the regular G21, perfectly fit my hand. Recoil was MUCH less than I was anticipating. It felt like a torquier 9mm. I've been shooting a lot of .40 S&W lately, but the .45 recoil in the G21SF felt VERY soft. I thought accuracy was excellent as well.

 

All in all a good day, and good to see Cylinder Head again as well.

 

 

Was the speed you achieved with the G19 Gen3 due to the laser?:scratchhead:

 

I am waiting for the G21 Gen4's arrival in April before I make a decision on a G20 or a G21 Gen4. There are a lot of considerations including the cost and supply of ammo.

 

I tested the S&W M&P .45 on Friday night at Shore Shot and the recoil and accuaracy at 7 yards were fine. I'll be back to try their G21 Gen3 for comparison to the M&P and the G19 Gen4 and G20 so I can choose.

  • Author

Was the speed you achieved with the G19 Gen3 due to the laser?:scratchhead:

 

I am waiting for the G21 Gen4's arrival in April before I make a decision on a G20 or a G21 Gen4. There are a lot of considerations including the cost and supply of ammo.

 

I tested the S&W M&P .45 on Friday night at Shore Shot and the recoil and accuaracy at 7 yards were fine. I'll be back to try their G21 Gen3 for comparison to the M&P and the G19 Gen4 and G20 so I can choose.

 

No laser on the G3 G19. Tried shooting w/ a laser once and found it very distracting. I found I was looking at the laser dot dancing around on the target instead of focusing on the front sight. Just a Streamlight TLR1s, which can be found here for the great price of $84.99. Maybe I overestated my capabilities w/ speed as Bullet Hole really doesn't allow rapid fire. Figure 2-3 shots per second. I'd love to find a place where I really could rip out some rounds. Seriously considering an Airsoft Glock to setup speed/tactical shooting scenarios. I figure if the guy from Japan won a major competition by practicing on an Airsoft pistol, this might be a good way for me to practice more interesting shooting techniques.

 

I know what you mean on waiting for the Gen4 G21/G20. Just for ammo cost, I'd probably stick to the G21. I can't stress enough how impressed I was w/ the G21SF that I fired. If only .45 was cheaper. I can't imagine what 10mm would run.

 

Please keep us updated on your comparison of the M&P45 vs. the G21. I've read nothing but great things about the M&P45 (aside from the trigger) and how soft of a shooter it is. I have an M&P40 that I like. Strangely though, I can't say any of the 3 backstraps fit me perfectly. I'm considering ordering an extra set to reshape and stipple.

 

If you ever get up to the Bullet Hole, you are more than welcome to shoot what I have on hand that day.

No laser on the G3 G19. Tried shooting w/ a laser once and found it very distracting. I found I was looking at the laser dot dancing around on the target instead of focusing on the front sight.

 

Funny you mention that, I turned on the laser on my M6x for the first time in months while at BH this past Saturday and shot my worst string of the day. Before that I was literally "Robin Hooding" my 2" shoot'n'sees and I couldn't group worth a **** with the laser on. I'm sure it would be decent for point shooting in a really stressful situation if I just had to get the dot on target but for target shooting lasers suck.

  • Author

Funny you mention that, I turned on the laser on my M6x for the first time in months while at BH this past Saturday and shot my worst string of the day. Before that I was literally "Robin Hooding" my 2" shoot'n'sees and I couldn't group worth a **** with the laser on. I'm sure it would be decent for point shooting in a really stressful situation if I just had to get the dot on target but for target shooting lasers suck.

 

Totally agree!!!

Lasers on pistols are harder for me to shoot. Instead of watching the front sight or your target you end up watching the laser wiggle and dance around. They do have an asset in that you can shoot from the hip or in unconventional positions which is a plus in concealed carry or home defense.

Please keep us updated on your comparison of the M&P45 vs. the G21. I've read nothing but great things about the M&P45 (aside from the trigger) and how soft of a shooter it is. I have an M&P40 that I like. Strangely though, I can't say any of the 3 backstraps fit me perfectly. I'm considering ordering an extra set to reshape and stipple.

 

If you ever get up to the Bullet Hole, you are more than welcome to shoot what I have on hand that day.

 

 

I shot a hundred rounds through it Friday night. The Glock 21 was in use and there were folks waiting for it when I got there so I spotted the M&P. It was very comfortable to hold and was the first time I shot a .45 ACP. It was tough filling the magazines and my thumb was sore afterwards. I was surprised at the recoil on the first round as it was more than I get on the G19 but it was easy to get used to. 5 rounds on the center spot of the target when I took my time. I'll be going back, perhaps this weekend, to shoot the G21.

 

Anybody shoot the compensated Glock models that can describe the differences shooting them? I don't believe a compensated G21 Gen4 is on the drawing board in GA at this time.

 

Bullet Hole is closer for me to shoot at after work so I may take you up on your offer. Any days of the week better than others or is it pretty much hit and miss?

I've shot both the M&P45 and the Glock 21. I shot well with both, better in slow fire with the M&P, but doing double taps with the G21 yielded some pretty amazing results. I was able to put two rounds within an inch of each other center mass, and pretty consistently. I have a video of my first string doing this that I'll upload. I like the ergo's on the M&P, but I am SOLD on the low bore axis of Glocks in general. I'm not the biggest Glock fan, but they sure do shoot extremely flat and easy. However, if I was going to pick one up and get proficient with it, I'd buy the M&P.

  • Author

I shot a hundred rounds through it Friday night. The Glock 21 was in use and there were folks waiting for it when I got there so I spotted the M&P. It was very comfortable to hold and was the first time I shot a .45 ACP. It was tough filling the magazines and my thumb was sore afterwards. I was surprised at the recoil on the first round as it was more than I get on the G19 but it was easy to get used to. 5 rounds on the center spot of the target when I took my time. I'll be going back, perhaps this weekend, to shoot the G21.

 

Anybody shoot the compensated Glock models that can describe the differences shooting them? I don't believe a compensated G21 Gen4 is on the drawing board in GA at this time.

 

Bullet Hole is closer for me to shoot at after work so I may take you up on your offer. Any days of the week better than others or is it pretty much hit and miss?

 

Thanks for the info. I understand a compensated .45 doesn't do much to alleviate muzzle rise, unless you're going to really stout rounds. When I go to the BH, it's usually on a Sat morning. I try not to get there past 10:00am as it fills up quick and then you have to wait.

 

 

I've shot both the M&P45 and the Glock 21. I shot well with both, better in slow fire with the M&P, but doing double taps with the G21 yielded some pretty amazing results. I was able to put two rounds within an inch of each other center mass, and pretty consistently. I have a video of my first string doing this that I'll upload. I like the ergo's on the M&P, but I am SOLD on the low bore axis of Glocks in general. I'm not the biggest Glock fan, but they sure do shoot extremely flat and easy. However, if I was going to pick one up and get proficient with it, I'd buy the M&P.

This sounds like my experience w/ the G21SF I shot that morning. Why the preference for the M&P? Not to say I don't like it, as I do. Just curious what you find is your preference on the M&P. I find the M&P has little ergo niggles that I don't like. None of the backstraps are great for me, and my middle finger rubs raw from the underside of the trigger guard. I'm hoping to run into someone at the BH who has one so I can run a few rounds through it.

This sounds like my experience w/ the G21SF I shot that morning. Why the preference for the M&P? Not to say I don't like it, as I do. Just curious what you find is your preference on the M&P. I find the M&P has little ergo niggles that I don't like. None of the backstraps are great for me, and my middle finger rubs raw from the underside of the trigger guard. I'm hoping to run into someone at the BH who has one so I can run a few rounds through it.

 

Better trigger and grip angle (for me) on the M&P. Like the ergos better, hate the glock slide release and mag release.

  • Author

Better trigger and grip angle (for me) on the M&P. Like the ergos better, hate the glock slide release and mag release.

 

Gotcha!!! Have to agree that the mag release on the M&P is better. I like the ambi slide release of the M&P, but find it takes more pressure to actuate than the Glock, or most pistols for that matter. I've read about the Vickers mag release for the Glock and may get one to see if it works for me. Also, I believe they have a new slide release that is easier to actuate w/out additional bulk. On the M&P, I installed an Apex sear and polished the internals. I'm going out on a limb here, but I think this trigger setup is the nicest one I've encountered in a polymer pistol. Only niggle here is the reset in that it's not THAT strong, yet considerably better than stock. For me, it's fine. Also, on the Glock, the mag doesn't pop out w/ a spring loaded jump when the mag release is depressed. The M&P is better in this regard, w/ the HK, Sig P series and 1911's being stellar.

 

Just for curiosity sake, how would you rate your HK's for ergo's, controls and what not?

 

I have a USP45F and find it's controls as my fav. The HK mag release is the best thing out there, and the slide release is perfectly placed...for me. Not too big of a fan of the cheese grater checkering on the front and backstraps, but one gets used to that. I have to believe the HK45 is better in this department.

The HK45 is better in every capacity. It was Larry Vickers and Ken Hackathorn's answer to the 1911, springboarding off the reliability of the USP. Just think about that.

 

It has an even larger mag release that literally ejects mags when you hit it. Ambi slide release is easy as pie, and the trigger is terrific, especially with a little work done to it. Ergos for the HK45 and P30 are unmatched, the only qualm I have is the bore axis.

This is a great arguement, and one the government WAS going to have. I do believe any of the choices mentioned would do the task at hand.

 

XD45 Tactical

Taurus 24/7 OSS

GLock 21

HK45

FNP45

M&P45

 

Every choice has it's ups and downs. Although the first two are my favorites.

Regarding the ejection of the magazine, I'm wondering if there are differences with the Glock Gen4's. With my G19 Gen4 I have to have my left hand ready when I hit the release with my right thumb or I'll be picking the empty magazine up off the floor. The M&P45 seemed to pop the magazine out but I was pulling it out of the gun when reloading.

 

 

  • Author

The HK45 is better in every capacity. It was Larry Vickers and Ken Hackathorn's answer to the 1911, springboarding off the reliability of the USP. Just think about that.

 

It has an even larger mag release that literally ejects mags when you hit it. Ambi slide release is easy as pie, and the trigger is terrific, especially with a little work done to it. Ergos for the HK45 and P30 are unmatched, the only qualm I have is the bore axis.

 

Yup, kind of what I figured. The 1st time I fingered a P30 was at Meltzers in Garfield. I said "wow" when I picked it up. The guy behind the counter mentioned that everyone who picked up the P30 said the same thing..."Wow"!!! I remember shooting yours and liking it a lot. At some point, I'm getting a P30.

 

 

This is a great arguement, and one the government WAS going to have. I do believe any of the choices mentioned would do the task at hand.

 

XD45 Tactical

Taurus 24/7 OSS

GLock 21

HK45

FNP45

M&P45

 

Every choice has it's ups and downs. Although the first two are my favorites.

I've not shot the Taurus. It looks like a decent pistol, but don't know anyone who has shot one. I used to have the XD45 Tactical, but sold it to a fellow NJGunForums member. IIRC, the one he bought from me was his 10th. I found the XD45T to be accurate, but hard to be accurate on and the high bore axis seemed to contribute to a very whippy muzzle when fired. Didn't like the trigger. I'd be curious to try one w/ trigger work on it. Liked the ergo's of the pistol though.

  • Author

Regarding the ejection of the magazine, I'm wondering if there are differences with the Glock Gen4's. With my G19 Gen4 I have to have my left hand ready when I hit the release with my right thumb or I'll be picking the empty magazine up off the floor. The M&P45 seemed to pop the magazine out but I was pulling it out of the gun when reloading.

 

Interesting. I'll have to check my Gen4 G23 to see how it compares to my other Glocks.

I've not shot the Taurus. It looks like a decent pistol, but don't know anyone who has shot one. I used to have the XD45 Tactical, but sold it to a fellow NJGunForums member. IIRC, the one he bought from me was his 10th. I found the XD45T to be accurate, but hard to be accurate on and the high bore axis seemed to contribute to a very whippy muzzle when fired. Didn't like the trigger. I'd be curious to try one w/ trigger work on it. Liked the ergo's of the pistol though.

 

They are very popular in America, where there are alot more choices in firearms. You can shoot mine when I pick her up. They built the OSS to compete for the government contract a few years ago so it wasn't built for plinking and looks, although she is purdy! In regards to the XD45 tactical, the high bore is more prevelant in the smaller guns and doesn't seem to be an issue with the Tactical frames. None of the 45 polymer double stacks come close to the Glock in that regards.

  • 2 weeks later...

Regarding the ejection of the magazine, I'm wondering if there are differences with the Glock Gen4's. With my G19 Gen4 I have to have my left hand ready when I hit the release with my right thumb or I'll be picking the empty magazine up off the floor. The M&P45 seemed to pop the magazine out but I was pulling it out of the gun when reloading.

Interesting. I'll have to check my Gen4 G23 to see how it compares to my other Glocks.

 

 

I've discovered the original Glock magazines were designed to stay in the gun if the magazine release was pressed and there were bullets still in the magazine. They did this by making the magazines without the metal lining running all the way to the base of the magazine. These are Non-Fully Metal Lined (NFML) magazines also known as Non-Drop Free (NDF) magazines. In current magazines the metal lining extends the whole way down the magazine tube. These will drop out of the gun even when full of bullets. They are called Fully Metal Lined (FML) or Drop Free (DF) magazines.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.