Finally got to shoot my new to me Sig 226R with Night sites purchased in the marketplace here.

Thanks to Mike G for taking me to the Old Bridge pits on Sat.

 

Gun was a blast to shoot literally. VERY accurate 9even for me), felt good in my hand (altho I def want the E2 Conversion which I have ordered, but is on back order).

 

My only issue is the slide did not lock about a few times after the last round was fired.

 

Happened to Mike 2xs in a row with 2 dif mags and happened 2xs to me (out of many mags shot)

 

Any ideas?

 

I like and shoot this gun sooo well, I am wondering where my beloved 92fs fits into my arsenal seeing that the 226 is similar in size, yet has a rail for a light and already has night sights.

It seems I shoot the sig just as well as the 92fs leading me to consider getting rid of the 92fs for something a bit different then anything I have. Like a gen4 G19 or the new 3.8 XDM subcompact in 9mm.

 

HMMMMMM.

Sometimes I feel the same way about my pistols that fit the same bill. I have my Beretta Steel I and Glock 34. Both are full sized 9mm, and both are awesome shooters. I like them both, but does it make sense to have two in the same category? Sometimes I wonder.

On the other hand, with my two N frame Smith and Wesson 357's (Model 27 and Model 28-2), I like them so much that I don't care about the duplication.

Your 92FS will sell quickly, trust me.

I know it will. That I am not worried about.

 

MIght have to have 1 more range session with both to determine, but it looks like the Sig will be the keeper. Then a good chance on the XDM subcompact

If you do decide to sell the 92fs please message me, I am going to have one permit to use before they expire so I may be interested

 

M

You got it.

MrP has the slide fail to lock back every now and then with his 226 e2, but its confirmed that its how he is holding it. I get the same thing with my glock every once in awhile, my thumb rides the slide stop and prevents it from locking back. I'de bet its the grip.

Mikey, you already sold the 92! BTW, you had the best subcompact gun when you bought the 26. Hindsight I guess.

No still have the 92 and HATED the G26. Good riddence to it. No hidsight needed on that one!

 

Love my Taurus slim a WHOLE lot more!

I have a factory 226 e2 and the slide failing to lock back is caused by your thumb riding the slide catch lever.

I will keep an eye on it next time I shoot. it. I much rather deal with user error then gun error

 

Thanks

 

SOO excited to try the e2 grips as the hogue aluminum i have on there no is a tad too large for my liking.

Thumb on the slide stop is a common technique issue with Sigs, especially for people used to a high grip on other pistols.

Def think that was the issue. Will pay more attention next time out.

mikey bring the 92 next trip we make . and let the target make the decession

mikey bring the 92 next trip we make . and let the target make the decession

 

Deal, lmk when ready

Congrats on the P226!!! I remember when you got the G26, then, I think, the Taurus and the Beretta. I have the Beretta 92FS and P226 also, and for that matter, now the G26 as well. I know what you mean about the 2 pistols being very similar. I prefer the P226, but I'm very reluctant to get rid of the Beretta. It's a '94 model (bought in answer to the then new AWB) and it has no plastic parts in it. I find the Beretta a little challenging because of the heavy trigger. The pistol is very accurate, but because of that trigger, it's hard for me to be accurate on. And it's a huge grip frame. But, the slide feels like it rides on ball bearings...really smooth. I have to get a few parts for various guns, but amongst them, I do want to get the hammer spring from the 92D model. Supposed to be lighter, but still provides reliable primer ignition. I've read it's supposed to bring the DA weight to about 8lbs, vs. the normal 10+lbs of the 92FS. While the DA pull is heavy, it is very smooth.

 

As others have mentioned on the slide not locking back, it's a thumb thing. I run into the same problem w/ Glocks. I've modified my grip to have my strong thumb (right hand) tucked under the left thumb. Slightly modified from the thumbs forward grip.

 

I'm planning on getting the E2 grip and SRT for my P226 also. I held a P226 E2 Elite in .40 at the Bullet Hole and I REALLY REALLY liked it. Gives it a feel reminiscent of a Browning High Power.

You remember well Ken. I have that Wolf D spring in my 92, I HIGHLY reco' it.

I REALLY like the 92fs and will be tough to sell, so I am def gonna compare the 2 side by side when Mike takes me again soon and then go from there.

Can't wait for the E2 grips. May look at the SRT as well at some point.

You remember well Ken. I have that Wolf D spring in my 92, I HIGHLY reco' it.

I REALLY like the 92fs and will be tough to sell, so I am def gonna compare the 2 side by side when Mike takes me again soon and then go from there.

Can't wait for the E2 grips. May look at the SRT as well at some point.

 

Definitely check out the SRT. Makes the trigger have a more precise feel and of course, the reset is considerably shorter and not nearly as vague. Can't find anyplace that has the kit for sale though.

 

Excellent info the "D" spring. Where did you get yours?

Mike,

 

Regulator has a mag that causes this. It's always the same mag that has the issue, so take that into consideration.

 

generally, it's your grip when it comes to sigs but his mag is dukey.

 

 

 

ALSO, anybody that has a 9mm 226 be it E2 or not, just get a .40 slide and your gtg. Why waste a permit to get another gun when you can pick up a .40 slide and be done with it. Just sayin...

D spring can be picked up lots of places. I think I got mine from My link. The difference in the trigger is night and day in my opinion.

 

Unless you have a need for money I would hold onto the Beretta. It's already bought and paid for. If something happens to one gun you always have another to play with. Wanna take a newbie to the range? Now you have 2 pistols and dont have to share one. Plus you might want to pass it down to your kids someday.

 

I say keep them both unless you REALLY need the money.

D spring can be picked up lots of places. I think I got mine from My link. The difference in the trigger is night and day in my opinion.

 

Unless you have a need for money I would hold onto the Beretta. It's already bought and paid for. If something happens to one gun you always have another to play with. Wanna take a newbie to the range? Now you have 2 pistols and dont have to share one. Plus you might want to pass it down to your kids someday.

 

I say keep them both unless you REALLY need the money.

 

I would sell it only to fund another gun purchase.

 

Most likely be replaced with either an XDM 3.8 compact or a gen 4 g19. Already have a 1911 I love and a Taurus 709 slim which I am REALLY liking.

 

I guess we shall see what happens

 

 

Bryan, def not the mags as Mike had the issue on 2 mags in a row and I only had it happen 2xs out of 10+ mags I went thru (and I only brought 2 mags with me).

I am leaning towards grip for sure.

Mike,

 

I wouldn't get the g4 g19. You have said that you don't shoot the glocks well and I would hate for you to get rid of a gun that you like and shoot well for something that may not work. Definitely rent or shoot one first.

 

Oh and look on sigforum, there is guys that sell the e2 grips from time to time.,

Mike,

 

I wouldn't get the g4 g19. You have said that you don't shoot the glocks well and I would hate for you to get rid of a gun that you like and shoot well for something that may not work. Definitely rent or shoot one first.

 

Oh and look on sigforum, there is guys that sell the e2 grips from time to time.,

 

I def wouldn't get it without shooting it 1st

Glad to hear your enjoying it... (although I may be weeping on the inside ) I did not have issues with the slide failing to lock back with the mags I sold, so I'm going to assume your thumb is the culprit.

 

It really was an outstandingly accurate pistol. Best of luck!!

Glad to hear your enjoying it... (although I may be weeping on the inside ) I did not have issues with the slide failing to lock back with the mags I sold, so I'm going to assume your thumb is the culprit.

 

It really was an outstandingly accurate pistol. Best of luck!!

 

 

Thanks and I have little doubt it's a thumb issue.