it's was a 7.62x39

Not a good round to shoot at steel plates, especialy wolf or another imported military ammo since they are steel jacket possibly even the core.

I just couldn't resist. I was sighting in a scope for my AR. After doing that, I got out my Saiga and shot the plate with irons from 50 yds away. The 7.62 did give a louder ping

 

I won't be doing that again.

What brand ammo was it.

What brand ammo was it.

 

wolf fmj

That will do it..

 

pick up some copper jacketed on sale put that plate out at 200 yds and have at it..

Really? Huh. I used Herter's 7.62x39 at futool's plates - no issues. Even 7.62x54R at 50 yards.

I have shot steel with the same gun with missed results I think there is a variance in the plates I shoot.. some if can get through.. and other plates stop it..

nick the herters may not be steel core it is russian though..

I might try some Herter's next time but will keep on buying Wolf. I just won't use them on my plates. Maybe an engine block next time lol

hit the middle of the steel Rey!

I have shot steel with the same gun with missed results I think there is a variance in the plates I shoot.. some if can get through.. and other plates stop it..

 

the hits on the center of the plate just cause a dimple. I think the two hits on the edge happened when the plate swung to one side and stayed there. i guess the edge was weak point.

hit the middle of the steel Rey!

 

yeah, I know. I have "old eyes" and I suck shooting iron sights.

Also could be how the plates were cut. Steel plates cut with a torch can be soft around the edged.

Use frangible ammo. Did anyone see the new FPSRussia video where he shoots plates within a few inches?

Use frangible ammo. Did anyone see the new FPSRussia video where he shoots plates within a few inches?

 

NO, post it.

NO, post it.

 

 

http://www.youtube.com/user/FPSRussia#p/u/0/6dxm_W3uNYw

 

About 2 minutes in

Wow... must be crazy expensive ammo.

Really? Huh. I used Herter's 7.62x39 at futool's plates - no issues. Even 7.62x54R at 50 yards.

 

Yeah we beat the sh1t out of mine. A couple of lil dents but not to bad.

Old bridge does frangible steel inside in the winter. Its cool and you can buy the ammo at the match for a decent price.

 

 

 

http://www.youtube.com/user/FPSRussia#p/u/0/6dxm_W3uNYw

 

About 2 minutes in

 

I shot fragile this morning at the indoor range. It was alot of fun. But that ammo DOES fly back at ya. I got hit more often then when we shoot outside. Granted we were alot closer.

Old bridge does frangible steel inside in the winter. Its cool and you can buy the ammo at the match for a decent price.

 

Member price for 9mm was 16 per box of 50. Not bad at all.

Also could be how the plates were cut. Steel plates cut with a torch can be soft around the edged.

 

 

Was just about to say that. The heat weakens the steels hardness. Ar400 and Ar500 steel it best served by cutting with a water jet.

Don't shoot steel with a rifle at 50yards or you will chew it up. Even AR500 with water cut edges from MGM, GT, and they other big guys will do that with rifle rounds at 50 yards. With normal ammo, and personally I haven't seen the steel jacketed stuff any more damage then normal jacketed ammo, through lots of matches both as a shooter and as an RO. Most targets are spec'ed for 100yards or more with rifle ammo.

Don't shoot steel with a rifle at 50yards or you will chew it up. Even AR500 with water cut edges from MGM, GT, and they other big guys will do that with rifle rounds at 50 yards. With normal ammo, and personally I haven't seen the steel jacketed stuff any more damage then normal jacketed ammo, through lots of matches both as a shooter and as an RO. Most targets are spec'ed for 100yards or more with rifle ammo.

 

Yeah, that too. I forgot to mention that you wanna move it out to 100 yards for rifles.

Yeah, that too. I forgot to mention that you wanna move it out to 100 yards for rifles.

 

thanks for the info guys... last time I brought it out to the 50 yd bay, my son and I were shooting 22 lr. I'll set it up at the 100 yd range next time for my AR.

That plate looks pretty thin from the picture, is it 1/4" ?

 

I've shot steel core ammo at my 1/2" ar500 plates at closer than 50 yards with no ill effect. It could also be the HAZ, like mentioned before ( heat affected zone ) when cut.

What kind of steel is it? And how thick? That's probably the issue.

I've shot steel core ammo at my 1/2" ar500 plates at closer than 50 yards with no ill effect.

 

Steel core or steel jacket? We've seen actual steel core AP stuff cut through steel like butter regardless of steel quality.

Steel core or steel jacket? We've seen actual steel core AP stuff cut through steel like butter regardless of steel quality.

 

i think it was just steel core tip now i think about it, refering the various types of 7.62x54r ammo