Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

is Bolt-on Brake NJ Legal? Yea or Nay

Featured Replies

Anyone know off hand if this is NJ Legal?

http://store.carolin...il?sfs=4b7bb01c

 

I'd like to get on for my 308 so I don't have to hire someone to hack-up my barrel up just to pacify NJ laws. I know there is a whole deal if you go the threaded route that it must be welded to and pass an x-ray quality test for the weld. Just kidding about the x-ray, maybe the new AG will require that next.... Anyway I would like to do bolt on.... thoughts?

 

TIA

Those things suck. But yes, its legal. I'de rather thread the muzzle 14mmx1LH and put a brake on or put a 24mmx1.5LH FSB on and put a brake on that. Both would have to be permenently attached.

you will need a spotter.. not to spot your shots.. but to figure out where the break went once it works itself loose enough for a round to hit it and send it down range..

 

do it right the first time IMO..

Yeah, without it being threaded on you have no way to be sure that its even straight. The barrel surface and the inside of the clamping surface would have to be %100 true for it to have any hope of working. They probably leave the muzzle end of the brake pretty open to make it more tolerant of being not straight which would make it even less effective.

I just have to say - I have a bolt on brake on my Mosin M44. Once it's on, that thing does not move and there's no way for it to shift. Since it's bolt on you can't make it to the tightest tolerances, but for me, it's enough. It was also cheap enough so if it ever gets shot off, I won't care. Has it happened yet? Not after several hundred rounds.

  • Author

If the barrel is not threaded then you're ok.

Thanks for the reply back; it is brand new and only the front sight is there now. The sights appears to be pinned in two locations. So Bolt-on is OK because I have no threads correct?

It seems everybody either knows, or assumes that you are talking about an EBR. Without knowing what kind of rifle, i.e. how many evil features, it's kind of a rush to judgement saying a threaded one must be pinned & welded - what if he's talking about a bolt gun? Just sayin' Of course, if it is an EBR, then the advice you've been given above is valid.

 

Adios,

 

Pizza Bob

Its for a converted 308 saiga

 

See, I rest my case....you knew

Holy crap I just saw the price! $169?!?!??!?!

 

You can get an AK-74 style brake for $50, a 24x1.5mm LH FSB for $50, $20 labor from matt yeamon, and $50 of shipping for both ways and have a MUCH better product for the same price (or you could DIY)

  • Author

Just received the other emails replies...

 

 

OK then the Bolt-on is not recommended. I just don’t like the fact that it has to be welded on top of the threads. IMO that kind of defeats the purpose of the having threads just so I could satisfy some goofy NJ reg. I think I’d rather bolt on brake then tig weld the seam if it gets loose as stated above then it's not going anywhere... so essentially it would be joined to itself that way I could grind that off if I want to remove it.

Just received the other emails replies...

 

 

OK then the Bolt-on is not recommended. I just don’t like the fact that it has to be welded on top of the threads. IMO that kind of defeats the purpose of the having threads just so I could satisfy some goofy NJ reg. I think I’d rather bolt on brake then tig weld the seam if it gets loose as stated above then it's not going anywhere... so essentially it would be joined to itself that way I could grind that off if I want to remove it.

 

You get to have the threads welded over so you can satisfy that "goofy NJ reg" and spend the rest of your life a free man.

 

OR, you can ignore that "goofy NJ reg" and risk a 7 year vacation in Rahway. Take your pick.

 

I wouldn't risk leaving the threads intact without something permanently attached directly to the threads. A bolted on brake will certainly not pass the evil feature test. A bolted then welded on break may or may not, since the barrel is still threaded and depending on the size of the opening in the brake you may still be able to use said threads.

 

Worst case scenario you weld a brake and make it NJ legal, then move to a free state in a year and want to be able to use a flash suppressor/silencer. Sell the whole thing, or even just get a new threaded barrel, and there you go. You get to have a threaded barrel AND avoid getting real close with Bubba.

The threads ensure it is on straight with a clean attachment and are the strongest method of attachment. What's not

To like?

It seems everybody either knows, or assumes that you are talking about an EBR. Without knowing what kind of rifle, i.e. how many evil features, it's kind of a rush to judgement saying a threaded one must be pinned & welded - what if he's talking about a bolt gun? Just sayin' Of course, if it is an EBR, then the advice you've been given above is valid.

 

Adios,

 

Pizza Bob

According to the link it's for a Saiga Bob

Just received the other emails replies...

 

 

OK then the Bolt-on is not recommended. I just don’t like the fact that it has to be welded on top of the threads. IMO that kind of defeats the purpose of the having threads just so I could satisfy some goofy NJ reg. I think I’d rather bolt on brake then tig weld the seam if it gets loose as stated above then it's not going anywhere... so essentially it would be joined to itself that way I could grind that off if I want to remove it.

 

as glenn pointed out.. when you thread the barrel and mount it.. you are ensuring that you get a straight solid fit..

 

you weld the break and if need be you can remove it later.. but if you buy the right break the first time you will really not need to replace it..

I have this break on my 308 and it is great.. follow up shots are VERY fast.. I was shooting a hostage steel plate and getting back on target faster than the target could reset..

 

http://www.jprifles.com/1.4.3_tre.php

Ok...I'll be the one to ask....What are you looking for from the brake?? I assume now you have a bare muzzle, what is that NOT doing for you? Are you looking for performance, or appearance?

Ok...I'll be the one to ask....What are you looking for from the brake?? I assume now you have a bare muzzle, what is that NOT doing for you? Are you looking for performance, or appearance?

 

he wants to reduce muzzle climb.. which that break will do..

  • Author

You get to have the threads welded over so you can satisfy that "goofy NJ reg" and spend the rest of your life a free man.

 

OR, you can ignore that "goofy NJ reg" and risk a 7 year vacation in Rahway. Take your pick.

 

I wouldn't risk leaving the threads intact without something permanently attached directly to the threads. A bolted on brake will certainly not pass the evil feature test. A bolted then welded on break may or may not, since the barrel is still threaded and depending on the size of the opening in the brake you may still be able to use said threads.

 

Worst case scenario you weld a brake and make it NJ legal, then move to a free state in a year and want to be able to use a flash suppressor/silencer. Sell the whole thing, or even just get a new threaded barrel, and there you go. You get to have a threaded barrel AND avoid getting real close with Bubba.

 

I suggest you go back and re-read what you omitted in your quote. you left out the part where I asked about welding the bolt on system but I guess if you quoted the entire post you would have no joke.

 

So what you are saying is if I tig-welded the bolt system that’s also illegal, or you don’t know? Again my intent (at this point) is NOT to thread it, got it? If you are trying to help thank you, but if you just looking to drop old punch lines please move on..

 

 

as glenn pointed out.. when you thread the barrel and mount it.. you are ensuring that you get a straight solid fit..

 

you weld the break and if need be you can remove it later.. but if you buy the right break the first time you will really not need to replace it..

I have this break on my 308 and it is great.. follow up shots are VERY fast.. I was shooting a hostage steel plate and getting back on target faster than the target could reset..

 

http://www.jprifles.com/1.4.3_tre.php

 

Thank Vladtepes & Glenn, I will look into it and pricing. Someone else metioned a "pressure mounted system" on other site, any thoughts of that? I just don't want a hack-job and this is something that don't need to be done right away. Just looking for my best options

I suggest you go back and re-read what you omitted in your quote. you left out the part where I asked about welding the bolt on system but I guess if you quoted the entire post you would have no joke.

 

So what you are saying is if I tig-welded the bolt system that’s also illegal, or you don’t know? Again my intent (at this point) is NOT to thread it, got it? If you are trying to help thank you, but if you just looking to drop old punch lines please move on..

 

Sorry, I misread your post and thought it was already threaded.

 

If it was already threaded I don't know if welding a bolt-on without also rendering the threads unusable somehow would satisfy the evil feature test. I know that I certainly wouldn't risk having visible threads at the end of saiga in NJ.

So umm anyway,does anyone know of someone in Northern NJ/Morris ,passaic county area that can blind pin a threaded brake for me?

Its for an AR-10. already have the threaded brake .

Thanks. BTW Vlad i did the trigger and hammer on my CX4 .WOW what a difference! Thanks for the info a few months ago.

  • Author

Sorry, I misread your post and thought it was already threaded.

 

If it was already threaded I don't know if welding a bolt-on without also rendering the threads unusable somehow would satisfy the evil feature test. I know that I certainly wouldn't risk having visible threads at the end of saiga in NJ.

No problem, correct no threads. FYI some of the guys here helped with me with the Saiga conversion but for the brake I think I’m going to farm this one out....

for what its worth.. if there is an "attachment" that the brake screws onto.. and you weld that to the barrel without welding the threaded part (attaching the threaded adapter via welds while allowing the brake to be removed.. you would IMO be in violation of the law.. since the adapter would become part of the barrel..

 

but all of that is moot since you are gonna to do it proper anyhow...

  • Author

for what its worth.. if there is an "attachment" that the brake screws onto.. and you weld that to the barrel without welding the threaded part (attaching the threaded adapter via welds while allowing the brake to be removed.. you would IMO be in violation of the law.. since the adapter would become part of the barrel..

 

but all of that is moot since you are gonna to do it proper anyhow...

I'm either going to leave it as is or find someone that's completed the job for NJGF members who are happy with the end result. I remeber seeing a post here(with image) not too long along where brake was welded on and the weld was poorly done and filled with holes, I don't want that...
  • 1 month later...

If I can make a suggestion, check out Kahntrol Solutions, yes it is my brother making them but i have them on several rifles of my own, if you go to the images page the AR-308 and the 30-06 are both mine. I also have one on my ar-15 that is in the middle of a rebuild which is why it is not pictured. I can honestly tell you the 30-06 is about like shooting a bolt 223 now, the ar-308 is about the same as my ar-15, and the ar-15 is just a joke to shoot.

 

reasons for clamp on

 

1- if made correctly and to the barrel it will be going on it is reliable, easily installed and when maintained properly it isn't going anywhere.

2- a muzzle brake by nature throws the sound out the side rather than down range which tends to tick off your neighbors at the range, IF your range allows them at all. therefore you may need to remove it from time to time.

3- if you need to perform work that requires more dis-assembly i.e. removing gas block on ar-15 you need that muzzle brake removable!

 

With the AR-308 i can honestly put 10 rounds minute of deer at 100 in 6 seconds, that is my reason for wanting all my rifles to have brakes on them.

 

If nothing else check them out and give us feedback as to what you think.

  • Author

If nothing else check them out and give us feedback as to what you think.

 

Sorry I should have specified Saiga 308 which would likely be a totally different design. However that is a nice looking device indeed, wish I could use it.

We have designed around several obstacles, i.e. We are currently developing a model for the DM EBR's (I work for a military supplier) that clamps right over flash suppresor. If you can get a couple measurements I can get back with you about whether we can do it or not. Get me barrel diameter at the muzzle, length of clear clampable barrel, and barrel diameter at the farthest clampable area up to 1 1/2" back. You can email me directly at tony*@kahntrol.com remove the star.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.