Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

what modern parts do you like on your AK?

Featured Replies

i know we all love the original. wood furniture and all. actually, the only ones i've ever shot were traditional style. but looking at some mods it seems there seem to be a few that could be a change for the better.

 

i think the following look like nice mods. say, for something like a saiga build

 

battlecomp

krebs custom safety

krebs rear aperture sight

bolton gas block (especially if you can shorten the barrel and add the battlecomp for only a 16" length)

tango down battle grip (us palm)

 

i did see a nice video of a guy using the vltor buffer tube and a magpul stock with cheek riser that also looked functional, but i think i prefer the skeleton stock style a little more.

I'de like to say "nothing" however, there is one thing I really like on my AKs and that is krebs rear with smaller diameter front sight. It requires no hacking of the gun, looks the same from 5ft away, and is a huge improvement in sights. one of the accuracy "flaws" in the gun is because its hard as hell to aim when your front post cover 8 feet at 100 yards lol, peeps and small front FTW!

I like the aftermarket bolt with the lever on the left hand side, Hogue gripe, Krebs safety and Krebs peep sight.

 

I tried a tacticool AK, it worked well but just wasn't a fan of it. Maybe in the future I'll pick up one just to dedicate to that.

I like the aftermarket bolt with the lever on the left hand side, Hogue gripe, Krebs safety and Krebs peep sight.

 

 

 

this and a hiviz front sight and arsenal furniture

  • Author

what is a bolton gas block..

 

gas block with front sight built in. 032.jpg

  • Author

but if you like a shorter barrel or want a lighter front end, its not a bad way to go. it's functional if you have a need/desire for either of those two

but if you like a shorter barrel or want a lighter front end, its not a bad way to go. it's functional if you have a need/desire for either of those two

 

the gun has to be 16in no matter what with you living in NJ.. no SBR..

if you really want a brake on the gun get a slant brake.. that will fit on the end of the barrel with next to no added length..

that is FUNCTION without giving up sight radius.. if you were going SBR or something then yes.. the sights would be better on the gas block..

 

also the only way that would be any shorter than a traditional AK brake is if you had the barrel turned down.. and then welded to 16in.. which is honestly a ridiculous amount of work for what you end up with?

 

not arguing.. do what you light..

but I dont think that what you posted is any lighter than an AK with a traditional slant brake..

slant brake is functional for FULL AUTO fire so I am sure it is plenty for semi..

 

I just fail to see the payoff in giving up iron sight use to mount a big fat brake on the end of the gun?

  • Author

how is that a "bolton" gas block?

 

designed and built by lenny bolton

  • Author

i agree in NJ it makes less sense than if you lived in other states. even if you wanted to keep the 16", maybe you want to run a 223 saiga with a silencer or something. who knows. and you obviously have more time behind an AK than i do. i definitely would go traditional for my first one anyways, maybe with a few reversible mods like the krebs sights and safety.

 

i'm not trying to convince for or against it, as i haven't shot it in person. but i tend to like shorter rifles. even in NJ, i much prefer a 14.5" pinned to 16 than a 16" with an extra 2". not very noticeable but, just even holding it i like it a little better.

 

 

what is the barrel length of a standard AK? and how much can you cut off without losing the front sight

i agree in NJ it makes less sense than if you lived in other states. even if you wanted to keep the 16", maybe you want to run a 223 saiga with a silencer or something. who knows. and you obviously have more time behind an AK than i do. i definitely would go traditional for my first one anyways, maybe with a few reversible mods like the krebs sights and safety.

 

i'm not trying to convince for or against it, as i haven't shot it in person. but i tend to like shorter rifles. even in NJ, i much prefer a 14.5" pinned to 16 than a 16" with an extra 2". not very noticeable but, just even holding it i like it a little better.

 

 

what is the barrel length of a standard AK? and how much can you cut off without losing the front sight

 

I wouldn't let yourself get hung up on traditional.. not traditional.. I would literally just focus on what works for you.. some people limit themselves to wood for example.. because it resembles a "traditional AK" which is fine if that is what you want.. but that is just it.. build the gun in a way that it works for you.. that way you are happy with it..

 

standard AK pattern guns are 16in? I mean there are different lengths.. but all I have purchased were 16in.. the best way to get a muzzle attachment is to replace the FSB with a threaded one.. add the muzzle device and then pin and weld.. OR you can technically thread the barrel.. and still use the standard FSB..

 

the problem with the whole 14 pinned to 16 is in AR world that is common.. I have one..

but you are not going to get that with an AK.. because when you buy it.. it is going to be 16... taking down the barrel properly will likely be costly.. I would not personally mess with it..

slant brake is TINY i dont even think you would see 2in of added barrel length..

 

vector_5b_000.jpg

  • Author

i guess if that functions as well as a akbc or fsc47 then it wouldn't make sense in NJ to do it. and i do agree that it is cost prohibitive unless you can take down the barrel yourself. i mean it'll cost a few hundred for the conversion. unless you are suppressing and want the shortest possible length with a flash hider, or you go SBR it probably does make no sense

also no real benefit in having the front sight there.. as you are shortening the sight radius.. which will actually make the gun LESS accurate..

 

And with the sight radius ALREADY being shorter than that of it's direct competitor, the AR, why handicap it more? Unless of course you're going to SBR it....which as you said, isn't an issue in NJ.

  • 2 weeks later...

I have a custom made AK with Bolton gas block with shorten barrel with FSC47 welded on to make OV 16.25 inches. I wouldnt worry one second about the sight radius change due to shorter barrel as i have hardly notice the difference between my full length Ak. What I've noticed is the handling character . It is quicker pointing, lighter, and overall much more agile. With Ultimak/Aimpoint T1 combo, i am ringing the steel at 100 yard easy and quick.

 

People want to increase the sight radius shoule look into TWS gen 2 dogleg cover as the rear sight is all the way back on the dust cover. In my other Ak, I have the TWS rail with ACOG riding on the top. I am most happy with TWS upgrade for its ability to mount any optics without any added weight. I have ran about 6500 rounds through without any issues so far. It had never had issues holding zero when the dust cover is moved. And, it is sexy looking mother of upgrade you can do by yourself in under one hour. With this set up, I was picking up broken pieces of clay pigeon at 80 yd and head shot at 100 easy. I wondering what I can do if I was a better shooter ;)

Btw, battlecomp makes 7.62 round feels like 5.56. Muzzle climb is significantly reduced and you are really right there for the follow up shots. I was shooting the buddys wire stock with battlecomp and man, it is a dream. I've decided to put FSC47 for the flash reduction.

 

I am running USPALM grip on two of my AKs and I cannot not be happier. It has much more meat to hold onto and for me, much more ergonomic to shoot.

I have a custom made AK with Bolton gas block with shorten barrel with FSC47 welded on to make OV 16.25 inches. I wouldnt worry one second about the sight radius change due to shorter barrel as i have hardly notice the difference between my full length Ak. What I've noticed is the handling character . It is quicker pointing, lighter, and overall much more agile. With Ultimak/Aimpoint T1 combo, i am ringing the steel at 100 yard easy and quick.

 

People want to increase the sight radius shoule look into TWS gen 2 dogleg cover as the rear sight is all the way back on the dust cover. In my other Ak, I have the TWS rail with ACOG riding on the top. I am most happy with TWS upgrade for its ability to mount any optics without any added weight. I have ran about 6500 rounds through without any issues so far. It had never had issues holding zero when the dust cover is moved. And, it is sexy looking mother of upgrade you can do by yourself in under one hour. With this set up, I was picking up broken pieces of clay pigeon at 80 yd and head shot at 100 easy. I wondering what I can do if I was a better shooter ;)

 

how is your 16.25in gun much more agile than a 16.xxin gun..

sometimes we do things to guns.. cars.. etc.. and tell ourselves they work better..I am NOT by any stretch saying that your gun functions poorly.. not saying that at all.. but instead saying I can not fathom how a gun whos length and weight have changed marginally at best... has dramatically changed the handling?

 

 

how is your 16.25in gun much more agile than a 16.xxin gun..

sometimes we do things to guns.. cars.. etc.. and tell ourselves they work better..I am NOT by any stretch saying that your gun functions poorly.. not saying that at all.. but instead saying I can not fathom how a gun whos length and weight have changed marginally at best... has dramatically changed the handling?

 

Vladtepes,

 

You make total sense. The amout of weight and the length saved isn't as significant as say going from AK to M1 carbine. But, where it is being taken off tend to have greater affect. The front end becomes lighter and points better. I have practice sword art for the last 20 years and once youu handled better made sword with having a perfect balance point (aka sweet spot) the sword feels lighter and recover/follow swing is much quicker. Same goes for the baseball bats.

OD green plastic furniture, hogue grip, ultiMAK rail, and a sig (aimpoint H-1 clone) red dot... I figured OD Green is like black, but not black, as I'm getting tired of black...

Btw, you are welcome to come shoot with me and check it out. I normally goto RG14 or Easton PA. I've got to handle my buddy's custom built before I've dropped my mula. I was really impressed needless to say.

  • Author

also, since this has kinda turned into a for/against the bolton gas block, i checked in with the guys at rifle dynamics.

 

they came back with the following

 

they took an Arsenal SLR-107F

 

added the following

 

  • US Palm Battlegrip
  • Ultimak rail
  • G2 trigger group
  • Krebs retainer plate

in addition to the bolton gas block and cutting down the barrel. installed a fsc47 and went from 36 5/8 inches to 34 1/4 inches and weight changed from 7 lbs 2oz to 6 lbs 5 oz. so its probably much more evident than comparing a stock AK with slant brake to a pinned full brake to 16.25" on the barrel

 

if you go here

http://rifledynamics.com/services/ak.php

 

scroll all the way to the bottom where it says "arsenal premium upgrade: in-depth" and that shows the pictures

 

 

tony, do you have pictures of both of your guns together?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.