So j0n told me when I bought it from him but I could use a refresher. How exactly does one breakdown and clean the p226 and maintain it. I have CLP and thats pretty much it as well as a .38 caliber cleaning brush.

 

Any suggestions would be appreciated.

http://www.sigsauer.com/CustomerService/MaintenanceGuides.aspx

 

 

There are some very good videos on YouTube - I've used them a few times to do a fairly detailed strip (not just a field strip). Also worth looking on the SigForum as there is a very good link/thread about lubricating the P226 which needs more oil/grease than the Glock.

 

For my Sig P226 USPSA I just use CLP to clean with a Hoppes Bore Snake and 9mm JAG/patches, followed by some additional SlideGlide grease. After a big session I may use some additional cleaning solution - but that is fairly rare.

 

I replaced my Sig P226 grips as I wanted a bit more 'bite' so went with some Hogues. If you search I've posted some photos in my previous threads.

 

Enjoy!

 

TheWombat

I have had the same gun, great gun. Sigs run quite well. All you really need to do is break down the gun, frame, slide, barrel. clean it all with hoppes, oil it up and you are good to go.

 

Some people use grease, I never did.

Easyvas cake, dont overthink it. I do use grease on the frame slidevrails, very little. Enough to form a sheen.

Breakdown and cleaning is esay. Lock slide back, rotate takedown lever, slowly let slide forward.

Remove spring and guide rod then barrel. Clean away.

Use the sig recommened grease TW25b on the rails and some on the barrel.

 

Reassemble

 

Done

TW25b? Is this the same grease that Sig provides with a new gun?

TW25b? Is this the same grease that Sig provides with a new gun?

 

Not sure if it's the same but I use Slide Glide on my 226 Tac Ops .40. Haven't had any issues with it.

more info ..internal and rail lubrication of sigs:

 

http://www.apextactical.com/blog/index.php/random-apex/lubrication-of-sig-sauer-pistol-rails/

Only downside with grease, attracts a lot of crap. =) don't use too much.

 

Dont know how, but I do know a few guns that had issues running because of too much grease. Never saw one run poorly because of too much oil.

 

At shot show, there was a company advertising a lubricant/metal treatment that was to protect the gun. Have not tried it yet.

 

Personally, I never use grease, hoppes to clean, and then oil to lube. tens of thousands of rounds no issues. The last mini torture session was my SVI, that went 1500 rounds or so before cleanings, without a single hickup. With only a light spray of oil in between.

 

You would figure any modern combat gun is designed to run anyway, with minimal maintenance in between. The tolerances on most guns are quite loose for a reason.

 

As long as you are cleaning your firearm regularly, I don't personally see the full value.

 

What I really love is the grease marketed to reduce recoil. The only thing I saw grease do is sludge up 2 or 3 guns at USPSA Nationals in Vegas, and a few more guns slowed down so much that it would not cycle fully in cold weather.

 

jmho. Could be completely wrong.

IMO, I would oil the action and grease the rails of a sig.

 

I have read Florks lubrication thread and it's not bad but that is meant for guns that get shot. Grease sitting on a gun that doesn't get shot much will cause issues. I have seen it personally. I like slide glide, I have several jars all with different thickness. In the summer I use a thicker grease and in the winter I use a lighter grease. I always oil the action and like mc 2500 oil that is made by Mil-Com. I usually use a suringe but was recently waiting on a order to arive.

 

I am more than happy to show you how to break the gun down to the frame. I suggest doing this at least every 3-5k rounds.

TW25b? Is this the same grease that Sig provides with a new gun?

Yes. Its whats in the little sample tube that comes with a new gun.

I'm a believer in using what the manufacturer recommends.