if you take off the handguards and the gas tube,replace the gas tube with a solid short rod and pin it as with the real tube.you will have a non semi auto ar,that since isnt a semi can keep all the features except possible round count max as yet undetermined.by our supreme leaders.all you have to do is grab the t-handle and pull for each shot.sure beats selling/giving to state/destroying ,whats the hive think.could also be reverseable for when the country wakes up from the nightmare in charge?

Oh, I thought this was going to be one of those threads that gets raided by the ATF.

Go **** yourself is the immediate thought I had

Nice try (assuming the mechanics would work), but um, NO. Since this change is not permanent, it would fit the same logic as temporarily blocked magazines down to 15 rounds. Unacceptable. Not even thinking about if it's legal for an unlicensed person to do that....

A single shot AR?

 

You're better off selling your semi's and buying a bunch of bolt actions.

I once accidently put my gas tube in upside down and accomplished the same thing. Talk about long day at the range.

Buy A bolt action

A single shot AR?

 

You're better off selling your semi's and buying a bunch of bolt actions.

 

Not really, one of my ARs is more accurate than many bolt actions.

Buy a barrel that hasn't had a gas port drilled?

I once accidently put my gas tube in upside down and accomplished the same thing. Talk about long day at the range.

 

Please explain how that can be done?

Buy a barrel that hasn't had a gas port drilled?

 

Or but an allen screw in the back of your gas block after you take the tube out.

Or but an allen screw in the back of your gas block after you take the tube out.

 

I feel like the net result would be a hospital trip the ER with a hex key lodged in your face.

I can just turn the switch on my gas block and its single shot

I feel like the net result would be a hospital trip the ER with a hex key lodged in your face.

 

Right! NOT!!

 

See post # 14

you could switch it to half auto also by the bolt hold open latch working backwards.would be as permanent as the difference between parts is in semi/full.semi which is no illegal yet and could be done by anyone not a mfg ,its not illegal to build up a lower with parts so how would it be?half auto would extract the brass but the bolt hold open would have to be hit to chamber another round.

Tom-Tom, Where are you located?

 

 

Please explain how that can be done?

It was late and I was tired but I got it in there.

 

 

Took a vid

Tom-Tom, Where are you located?

 

trenton

This is how they have their ARs in some parts of europe. Converted to bolt action with small mags. The original poster has a good point.

 

Sent from my DROID2 GLOBAL using Tapatalk 2

 

 

The OP is a damn quitter. Stop doing that. Stop it right now.

I miss my ARs, damn boating accidents.

I miss my ARs, damn boating accidents.

 

Mine too, They all went to the bottom about 20 miles off shore in about 250 feet of water. I think it was by the Arrundo.

I miss my ARs, damn boating accidents.

Mine too, They all went to the bottom about 20 miles off shore in about 250 feet of water. I think it was by the Arrundo.

 

Maks ought to change this site to NJBF, considering how much time we all spend on boats.

Right! NOT!!

 

See post # 14

 

Huh? having an adjustable gas block and putting a hex key in the gas port are 2 completely different things!

Maks ought to change this site to NJBF, considering how much time we all spend on boats.

 

Maks doesn't like boats. He's had an invite for two years and never has come down. I think he just doesn't want Anastasia to see the boat or he'll have to get one, the cheap ba#%^rd...

you could switch it to half auto also by the bolt hold open latch working backwards.would be as permanent as the difference between parts is in semi/full.semi which is no illegal yet and could be done by anyone not a mfg ,its not illegal to build up a lower with parts so how would it be?half auto would extract the brass but the bolt hold open would have to be hit to chamber another round.

 

This. modify the bolt catch to catch every time. No longer semi-auto. probably some serious wear and tear tho.

Huh? having an adjustable gas block and putting a hex key in the gas port are 2 completely different things!

 

Sorry some adjustable gas ports are nothing but an allen screw choking the gas port.

 

Don't want to have a wizzing contest (New Years resolution) So, I don't recommend anyone doing it.

 

But, If you want to pay for a FSB I'll mod one and fire the rifle over and over.

I'm just busting balls....

Its a thought I have had. I was considering just welding the gas port closed. Slotting the left side of the reciever and making it into a left side charger. But my interest was doing this for a non standard caliber like 6.5g. BUT the reason for the pursuit is for accuracy and I had a concern that manually charging it each time would reak havoc on consistancy. My other concern was systems that have tried this before had serious issues from what I recall. But it was based on a 50 cal