Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Liberator - Handgun where 15 of 16 components are 3d-printed

Featured Replies

lol the files are all over the internet and because of all this press it will likely never leave the internet. Our government is full of incompetents.

I just don't see why this is scary to anyone.  They've been building "zip" guns since bullets were invented.  Half of us on this forum could build a pretty nice working shotgun in a day in our garages.  We could build a working bolt action in a couple of days.

 

We could do the same out of plastic parts without a 3d printer.  These plans being available changes nothing.

I just don't see why this is scary to anyone.  They've been building "zip" guns since bullets were invented.  Half of us on this forum could build a pretty nice working shotgun in a day in our garages.  We could build a working bolt action in a couple of days.

 

We could do the same out of plastic parts without a 3d printer.  These plans being available changes nothing.

 

In ten to twenty years... even thirty... it is going to be A LOT more efficient and made with more resiliant material. Expect a 3D Printed "Assault" Rifle to be made as well. Also, the price of these printers will drop as they become more mainstream.

 

That is what the government fears and that is what I love.

In ten to twenty years... even thirty... it is going to be A LOT more efficient and made with more resiliant material. Expect a 3D Printed "Assault" Rifle to be made as well. Also, the price of these printers will drop as they become more mainstream.

 

That is what the government fears and that is what I love.

Every time a cashier checks one of my 20's with a counterfeit money detecting pen, I always ask if they've ever gotten any fake bills.  Most say that they or someone who works there has.  20 years ago, nobody had seen these pens.  Home printers weren't good enough.  Now you can't stop the casual counterfeiter.  

 

It will be interesting when you can't stop the causal firearm manufacturer.  Imagine what will happen once they perfect replicators.

 

replicator.jpg

  • 1 month later...

Sorry if someone already brought this up, I searched

 

http://yro.slashdot.org/story/13/06/13/1236219/bill-regulating-3d-printed-guns-announced-in-nyc

-> http://www.theepochtimes.com/n3/105893-bill-regulating-3d-printed-guns-announced-in-nyc/

 

 

NEW YORK—A new bill to regulate 3D printed guns was introduced by Council Member Lewis Fidler (D-Brooklyn) on June 12.

The bill would amend the New York administrative code to make it illegal to use a 3D printer to create any part of a firearm unless the person is a licensed gunsmith. A gunsmith using a 3D printer to print any part of a gun would be required to notify the NYPD and register it within 72 hours.

Proposed revisions to the code include language ensuring 3D printed guns fall under the same regulations as other firearms. This includes clarification on systems to feed bullets, requirements for a serial number, and regulations against destroying weapons.

Cody Wilson, creator of the first 3D printed guns, and founder of Defense Distributed, said in an email interview, “Such legislation is a deprivation of equal protection and works in clear ignorance of Title I and II of U.S. gun laws.” Wilson was referring to Title 1, the Gun Control Act of 1968, and Title 2, the National Firearms Act.

Fidler’s representative, Brad Reid, said “Before any bill comes out it has to go through the generals council office of the City Council.” He also noted that since the bill made it past, it shows that it is in line with current laws.

A second piece of legislation was also announced June 12 by State Assemblywoman Linda Rosenthal (D-Manhattan), which would make it a felony for anyone to manufacture, sell, or use guns or ammunition magazines made with a 3D printer. Rosenthal’s legislation is still in the Codes Committee.

Under federal law, it is legal for individuals to manufacture certain types of firearms as long as the guns are not resold, are not fully automatic, and comply with set limits such as on gun and barrel length.

The kicker is that in order for a homemade gun to be legal, the person who builds his or her own gun needs to make at least 20 percent of the receiver, which houses the trigger mechanism and other operating parts of the firearm. The law is in place to prevent people from buying all the gun parts separately, and then putting them together. This is precisely the part of the law that 3D printed guns get around, since the receiver can be printed from a digital file.

There are many types of homemade firearms, mainly referred to as “zip guns,” and “pipe guns.” A perusal of the Internet shows homemade firearms built into flashlights, pens, and even made with metal pipes duct-taped onto wooden boards.

Ernie Encinas, founder of Coastline Protection and Investigations, a former homicide detective who served in the San Diego Police Department for 31 years, said homemade firearms used to be common, but most criminals these days just turn to the black market for their firearms.

“I don’t think it’s going to be that big of a problem, people making their own guns,” he said.

“Why would you use a cheap gun when you can get a regular one on a black market?” he said. He added that most of the criminals he has dealt with used guns that were stolen, then resold. “If a bad guy wants a gun he’s gonna get a gun.”

Encinas added, however, that gun owners should have record checks and be required to register their weapons—whether purchased or homemade.

He noted that registering a firearm will not make it immediately traceable if used in a crime. Ballistics investigators use two forms of information from a firearm to trace weapons used in crimes. The rings inside the barrel are unique to each gun, and the spot where a trigger hits leave unique markings on shell casings.

Encinas said police only collect the information if a gun is used in a crime. “If the gun has never been used on anything, then nothing will show.”

A representative from a local makerspace that uses 3D printing said it’s unlikely the legislation would affect anyone who uses 3D printers for their regular work. The 3D printers are often used for fabrication and design, in art and prototypes for products.

The representative, who requested that he not be named, added that manufacturing a firearm with a 3D printer would be costly. “It’s not cheap,” he said. “It’s definitely expensive.”

 

 

Replace their assemblyperson names' with ours, no one would know the difference.

 

Is there something in the water around here that makes our politicians dumb but makes the bagels taste good?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.