Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

UH oh. Problems with my AR-Any smiths in East Brunwsick Area?

Featured Replies

Its not that I'm proud or not. The reason for staking the endplate is to make sure the castle nut doesn't wiggle off. This can also be accomplished with a little bit of blue loctite. Hasnt come off yet.

 

Yet is the operative word.  Take a punch to that thing and stake it, specially if you are happy with the configuration and don't plan to take it apart.

It really depends on what you feel is the correct way, some people like to torque the castle nut with some loctite.. some people like to barely tighten it and stake it.. some torque it and stake it.. IMO i would hand tight it, give it a good snugging and then stake it. A down side to toctite is that the whole assembly can come loose. the castle nut might not budge, but the whole buffer tube might. Which is something you would notice the second it happens when you stock is off center.

Yet is the operative word. Take a punch to that thing and stake it, specially if you are happy with the configuration and don't plan to take it apart.

I will be getting a qd endplate soon and I will also not be staking a $20-$30 endplate. I very highly doubt the torqued and loctited nut will shake loose on a semi auto .223.

 

It really depends on what you feel is the correct way, some people like to torque the castle nut with some loctite.. some people like to barely tighten it and stake it.. some torque it and stake it.. IMO i would hand tight it, give it a good snugging and then stake it. A down side to toctite is that the whole assembly can come loose. the castle nut might not budge, but the whole buffer tube might. Which is something you would notice the second it happens when you stock is off center.

You can use some on the tube end too. Ive just never heard of anyone having issues with it. I think either way works.

Why wouldn't you stake a $30 end plate? It is made to be staked, actually it is made to be torqued and then staked in two places. You can still remove it with a lower block and a vice if you need/want to. I have done it dozens of times on work guns.

 

And even though the endplate and castle nut are supposed to be one time use parts, if you do it right, you could use it more than once.

 

It is cheap insurance that your gun will run at twice the price.

And even though the endplate and castle nut are supposed to be one time use parts, if you do it right, you could use it more than once.

 

New guy here, pardon the ignorance

Why would the castle nut be a one time use item ?

Does it get maimed during removal if the plate is staked ?

One time use as in, installed and never removed... or removed at the point of replacement...

 

Once installed there is no reason to touch it unless you want to uninstall it. At which point you would then have to stake it again, which isnt an issue unless the previous marking bother you. The castle nut can always be reused since its not being punched.

A chemical way of ensuring the castle nut does not back off will not be as good as a mechanical way.  Solvens and oils used in the maintenance of the weapon will eat away at the lock tight pretty quickly.  If you shoot 300 or 400 rounds a year, you may not have a problem for several years and by then you will possibly even change the stock.  If you shoot several thousand rounds a year that castle nut will walk off pretty quickly...

 

There is a reason why weapons that run many rounds such as the ones in military hands are staked rather than having a few drops of threrad sealer used.

 

No offence, a $30 end plate is not worth having my weapon fail due to the catsle nut walking.  I have two rifles with ASAP plates and two with Noveske QDs and all 4 are staked.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.