Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adj Magpul stock (I wanna make her perty)

Featured Replies

Beauty is in the eye of the beholder, and this particular beholder is not fond of the "the gap" between the end-plate and the stock.

F'rinstance:

(please excuse the horrible picture quality. For those who have followed my build thread, this is my current - and highly inadequate - plan B for addressing my digi-cam problem. But this should at least provide enough of a visual supplement for representing the situation) 

 

gap.jpg

 

Deal killer? Of course not. But I already know that I'm not the first guy here who hasn't had the desire to cosmetically alter their rifle to one degree or another.

And since an "adjustable" stock in this state is adjustable only until it gets pinned, the cosmetic end-result for my particular adjusted/pinned stock length doesn't necessarily appeal to me.

 

Therefore I'm wondering if anyone here has addressed this situation and found something - or DIY'ed - to close that gap (cosmetically).

 

Obviously a fixed stock wouldn't present this type of gap situation. But I elected to go with an adjustable stock because I did not have that luxury (stock length adjustability) with my USGI M16's, and I wanted my AR rifle build to produce MY rifle as I wanted it to be configured, and as I wanted it to look.

 

I'm a handy guy, so I could obviously figure something out. But I also don't believe in reinventing the wheel. Therefore if someone has already found/created this particular wheel, I would appreciate a heads-up for dealing with this situation.

Thanks!

 

 

Just collapse and pin it... It's really going to depend what optic you plop on her if any.

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

Dang, hit the send button too fast. What I mean is if you plan on putting a Acog on there for instance, close eye relief is a problem. Conventional scope, not as much depending on the mount. Red dot, hardly at all. So if it ain't pinned yet, determine length by choice of optics. Chances are, there will always be some gap there. Just may be not as much.

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

  • Author

Just collapse and pin it... It's really going to depend what optic you plop on her if any.

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

 

Pending the outcome of how me/rifle perform at the range, this appears to be the comfortable position for me. Simply pinning the stock at position zero is not a comfortable position for me.

Zero might be too much. With my Acog, 2 or 3 worked. But again, optic will mostly dictate combined with mount.

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

Get the magpul fixed stock

  • Author

Dang, hit the send button too fast. What I mean is if you plan on putting a Acog on there for instance, close eye relief is a problem. Conventional scope, not as much depending on the mount. Red dot, hardly at all. So if it ain't pinned yet, determine length by choice of optics. Chances are, there will always be some gap there. Just may be not as much.

 

While my iron sights are a must for me, I do plan on adding/using optics as well.

And even though this stock is already pinned, it's pinned with a pin... so that can be tapped-out and the stock re-adjusted as necessary.

 

That said, the gap is the issue for me at the moment, and that's what I'd prefer to address right now.

Then what 555R said then...

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

  • Author

Get the magpul fixed stock

 

Fixed is fixed.

I'd prefer to find the click that works best for me, and not a predetermined length.

Yea, but you said the gap was ugly. No gap with fixed I posted in link. :)

 

Fixed is fixed.

I'd prefer to find the click that works best for me, and not a predetermined length.

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

  • Author

The Magpul fixed stock that is being suggested is 1" longer than my current setting. And even my current setting was a compromise between that click and the next closest (shorter) click.

I'm counting on range performance to determine the actual length that fits me best.

Hmmm, old fav hot pink panties tied in knot around gap or paracord? ;)

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

  • Author

Hmmm, old fav hot pink panties tied in knot around gap or paracord? ;)

 

I'll McGuyver something if necessary.

The main caveat however is that the charging handle needs to maintain the same low-profile clearance for the castle nut and the upper boundary of the stock itself.

That's the reason for seeking an existing solution to this (if any).

Honestly, never heard in all my years that someone didn't like the gap cuz it was ugly.

So I'll sit back and see what others suggest....

 

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

  • Author

Honestly, never heard in all my years that someone didn't like the gap cuz it was ugly.

So I'll sit back and see what others suggest....

 

 

Never said it was ugly, I'm just not fond of how it looks.

I'm probably in the major minority on this (maybe even alone in this) but it is what it is.

I'm certainly not dissing other people's likes or dislikes, I'm only expressing my own tastes in this regard.

If this is a first, well.... there's a first for everything ; )

  • Author

I did come across this....

 

P1020281_zps9dab9dc1.jpg

 

And even though it doesn't exactly fit what I'm looking for, it at least plugged the gap on that particular rifle.

I was just wondering if there was something else out there that accomplished something similar (minus the strap fittings).

extending the stock is a function of the stock? I am not sure why you would want to put something on the tube? I mean I read the thread.. but I am not sure I get it...  

 

looking at that stock I am assuming you dont shoot in a very squared off stance? it seems pretty far back.. 

  • Author

extending the stock is a function of the stock? I am not sure why you would want to put something on the tube? I mean I read the thread.. but I am not sure I get it...  

 

looking at that stock I am assuming you dont shoot in a very squared off stance? it seems pretty far back.. 

 

The minute I picked up the rifle after attaching the rear site (last position on the upper) I naturally gravitated to a NTCH location (although probably a fat finger... or 2 skinny fingers back from there) and then I sought the best length for the stock for my shoulder. And the position I chose allows me to attain a pretty compact hold (no flying wing).

And yes, the position of the stock is far enough back that my cheek rest is partially on the buffer. Even so, moving the stock closer does not feel right for me.

Besides, the fixed length stocks - including the A1 that I was accustomed to - are at least an inch longer than the position that I am set at right now.

 

Like I said, the range will determine the exact position, but I've already snapped-in using closer positions, and the only position that was comfortable to me was the one shown (as well as 1 click closer). 

Regardless... still a gap.

 

I'm certainly not suggesting that dry-firing is a substitute for live firing at a range, but "feel" matters when dry-firing, and that is the position that feels right to me. Perhaps that changes with the introduction of optics... but I have no frame of reference with that as of yet. 

  • Author

Paracord is obviously a McGuyver possibility (combined with something to fill the lower portion).

And btw, the sling attachment that you posted earlier is certainly a less intrusive means of filling the gap directly behind the end-plate. So that's a potential partial work-around.

 

But anyway, this is obviously not the best received request that I could have presented today, so I'll take that as a sign that my cosmetic tastes are are a bit more exotic than normal ; )

Oh well. But as I said right from word-one: beauty is in the eye of the beholder. 

How about the magpul fixed carbine stock. Right about position number 2 on an adjustable stock.

  • Author

extending the stock is a function of the stock? I am not sure why you would want to put something on the tube? 

 

I certainly respect your opinion enormously, so I'm only asking this for reasons of clarification.

 

I'm not sure I understand the meaning of "function" as it's stated. 

 

As I view it (as someone admittedly 100% new to adjustable stocks), an adjustable stock obviously has the function of being adjustable. Although here in NJ that function loses it's "adjustability" aspect immediately upon pinning. So a stock becomes just a stock, regardless of it's length. (fixed or adjusted to fixed).

That doesn't necessarily make it pretty (in my eyes at least : P ) but I'm truly not grasping the context of your statement. (although I sincerely wish to, so I hope that you will help me understand what you are trying to tell me)

I certainly respect your opinion enormously, so I'm only asking this for reasons of clarification.

 

I'm not sure I understand the meaning of "function" as it's stated. 

 

As I view it (as someone admittedly 100% new to adjustable stocks), an adjustable stock obviously has the function of being adjustable. Although here in NJ that function loses it's "adjustability" aspect immediately upon pinning. So a stock becomes just a stock, regardless of it's length. (fixed or adjusted to fixed).

That doesn't necessarily make it pretty (in my eyes at least : P ) but I'm truly not grasping the context of your statement. (although I sincerely wish to, so I hope that you will help me understand what you are trying to tell me)

 

 

im saying like.. I dont know how a buffer tube can "look ugly"

 

if you want more of a fixed stock there are a thousand awesome options out there..  when I lived in NJ I used an ACE stock.. it is a fixed stock that looks great IMO.. 

 

you can certainly do what you want.. but my point I guess is I see the exposed tube and think.. adjustable stock on a buffer tube... how could that ever be "ugly"..

 

 

easy solution you could always pin it all the way closed and shoot more squared off to the target.. lol..

 

not my gun.. but for example..

 

1.jpg

  • Author

How about the magpul fixed carbine stock. Right about position number 2 on an adjustable stock.

 

Yeah, good point. I was aware of that before I purchased the adjustable version, but I truly expected that I would take advantage of the adjustability aspect to experiment with different lengths in order to find my ideal setting (length).

So if it turns out that the 2nd click is better than the 3rd click, I will have to decide whether or not I want to shell-out more rifle-dollars to replace the "gappy" version with the carbine version. 

After all, I did admit that this issue was "cosmetic" and nothing more. In other words, what's it really worth to me.

Ok, last shot and I quit. This is a highly unusual request. Just remember. Black is beautiful; once you go black, you never go back; black power; yadda yadda... So here it goes.

 

Get one of these, trim off both sides of spider and make it perty...

 

Posted Image

 

Sent from John's iPad 2 via Tapatalk HD

Typos courtesy Apple...

I did come across this....

 

P1020281_zps9dab9dc1.jpg

 

And even though it doesn't exactly fit what I'm looking for, it at least plugged the gap on that particular rifle.

I was just wondering if there was something else out there that accomplished something similar (minus the strap fittings).

 

I have one just like that.  Works for me.  I'll get you a picture in a sec.  

 

Paracord also wouldnt be a terrible idea.  

My stock is a bit shorter than what you have yours at.  

 

IMG_20130818_204056_341_zpsfa87995a.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.