Hey everyone! This is our first post as we are new to the boards and just want to introduce our shop. We are a central NJ based shop that does Certified Cerakote applications, we are also a licensed FFL. Our shop we do a little bit of everything , we have the firearms side, we also do custom and industrial powder coating, sandblasting, ceramic work, and Line-X spray in bed liners. If anyone has any questions please feel free to reply , send a PM , or give the shop a call! Hope to be in contact with everyone , and chat it up on here as well as I am a forum junkie!

 

Jeremy @ GsdCoatings 732-722-2955 

I've been looking for a certified applicator in the state. They seem few and far between. Any plans on having a website or a place to show your work? Also, where in Central Jersey are you?

Welcome to the forum! Pm incoming

 

 

This signature exceeds the 15 character capacity

Excellent

Found their website.

 

http://www.gsdcoatings.com/cmsms/

 

Shows them in Keyport nice.

Yes sorry i forgot to add the website to my sig.   Our mailing address is Keyport NJ but we are basically located in Laurence Harbor which is just 2 miles down the highway. Now we are having a new website built and it will be up soon with somewhat of a price list and pictures and all that. On the old site it does say we dont have our FFL yet BUT WE DO HAVE IT. We became official the first week of december. You can see we are listed on Gunbroker.com as well.

 

Jeremy @ GsdCoatings.com 732-722-2955

Your website says that you only treat unserialized parts of a firearm. Has that status changed? Can you coat a rifle barrelled action?

Gents

 

I met Paul from GSD Coatings the other night while out for dinner. I heard someone speaking about guns so naturally I introduced myself. I am glad I did. I asked that they join NJGunforums because I know a lot of people here will have interest. I look forward to maybe getting that desert digital camo on my beretta 90-two. Looks nice! Welcome aboard guys!!!

 

Tom

 

 

Sent from my iPhone using Tapatalk

Awesome, Welcome - 

 

I've been thinking about having one of my revolvers done. Have you done any in the past? 

 

How thick is the layer build up of the coating typically ? 

Welcome!

worn_holster Yes we can do serialized parts of the firearms like barrels or receivers, the old website doesnt have accurate information because of how outdated it was. the problem was we could not store firearms because we did not have our FFL.  Alec.mc. its approximately 1-2 mills so its extremely thin and wont have any effect on covering up serial numbers or tolerances for the gun.

 

Jeremy @ GsdCoatings.com 732-722-295

Welcome Jeremy, I may be looking to get my shotgun done. Glad to have you aboard!

Welcome. I am looking into getting the slide of a pistol done and I am located very close to you, great knowing there is a local vendor!

Great timing. Looking to get my Tundras bed done. Im leaning more towards line-x. Hows it compare to Rhino?

blksheep to be completely honest and without trying to bash rhino liner they are nothing alike. LineX is sprayed into the bed hot and really glues and seals to the bed properly so nothing gets underneath. Its so strong and durable its unbelievable. If you come into our shop we actually sprayed Line-X on to those little cheap Styrofoam coolers you get at like home depot for like 3 dollars and it strengthens it soo much my big ass can stand on it !  

Good Luck in your business.  Glad to see you here.  blksheep, Line-X is the way to go. Had it done to a 2013 GMC full size P/U with the topcoat.  In a word, WOW.  Would not even consider anything else again.  Go see it.  You cannot believe the difference, worth every penny!

My Tundras factory bedliner is rubbing the paint off the bed at the end and causing some surface rust. Will linex prevent any future issues? How much does a typical job cost. I want to get the rails done also.

I got my sig done by GSD...Very very quality work...They are an FFL and very pro...

 

Sav

Email inbound. Woohooo

sav7 thank you very much for the feedback, as it is greatly appreciated! Hope to do more work with you one day!, and hope to meet some more njgunforums members!

We need pics sav7. I'm still drooling at having my beretta done in the desert digital camo

 

 

Sent from my iPhone using Tapatalk

PM sent.

I picked up my Remington 700 5R .308 from GsdCoatings today. They gave my receiver, barrel, and bolt a nice Armor Black finish. Excellent job, and excellent service. Jeremy and Derek were a pleasure to deal with. It is great to have a local outfit that handles Cerakote coatings. Thanks!

How much for a 5.5' bed lining?

Please send me pm. Im looking to get my g21 frame done in fde.

blksheep I'm sure for the rust that will need to be addresses first (not positive) but the Line-x will prevent anything being thrown in from damaging it. Have my Ram done and LOVE it, will always get it done on trucks. I even know someone who got his whole truck sprayed, looks pretty bad a$$, but expensive.

 

Would you guys sandblast rims and powder coat? I have 22s that need done.

 

Edit: already spending that money wisely there Dan? Lol

blksheep I'm sure for the rust that will need to be addresses first (not positive) but the Line-x will prevent anything being thrown in from damaging it. Have my Ram done and LOVE it, will always get it done on trucks. I even know someone who got his whole truck sprayed, looks pretty bad a$$, but expensive.

 

Would you guys sandblast rims and powder coat? I have 22s that need done.

 

Edit: already spending that money wisely there Dan? Lol

LOL, no thats gotta go to ammo. But in time i want to get it done.... 

Hey guys ,  sorry I have been sick the past few days and just laying in bed not at the computer =/ , so anyway let me do some follow up. Polak for a short bed truck , basic bed liner under the rail we charge $495 but there is alot of options like the UV top coat and the contractors cut and others ! Give me a call and I can tell you the specifics for your truck.   Thebeard PM incoming.  Ewc88 are the rims chrome or aluminum, we can def do the work for you thou! 

Rims are chrome. I can get pictures to send also if needed.

Rims are chrome. I can get pictures to send also if needed.

I hope you get them done, you need it!