Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

If it wasn't for bad luck, I would have no luck with guns :(

Featured Replies

I had yet another gun issue at a match today.  Was at Easton Fish and Game for a large IDPA match when my STI Trojan decided it just did not want to work anymore after only the third of twelve stages.  Fortunately for me another shooter on my squad had the same gun and was nice enough to share his gun with me so I could complete the match.  When I opened her up here is what I found :(

 

16660708814_3ed322a349_z_d.jpg

Ssp. Keep em clean. Never had any failures. Howard try a wheelgun. They dont have those extra non essential parts. :)

Is that the 9 or 45 version? Sheesh those are supposed to be top notch. Better luck next time.

That sucks. Sorry. It's a relatively easy fix just make sure to check the frame of the pistol to make sure that you aren't slamming on the VIS or something wacky. Most likely it just a weak link.

 

Glad that you were able to complete the match.

 

C

 

ETA: It could be that your link is a touch short rather than it smacking something inside. Be sure to check it regardless.

 

C

I have never seen a barrel link break. I would replace the slide stop also. Barrel link's purpose is to lower barrel after firing nothing more. On return to battery the barrel returns to position by riding up on the lower barrel lugs. Something is not right with the lower barrel lugs and lockup. A link should never be used to tighten a barrel during lockup. Link spacing between the two holes can vary from .268 to .273 I believe so time for a smith to see what the problem is.
Some reading about function and effect. http://www.m1911.org/testkit.htm

  • Author

This is a 9mm variant of the gun.  Not sure about those wheel guns being so great.  A woman on my squad had her's totally lock up and you could not even open the cylinder.  I think it turned out the firing pin in her's broke.  I am guessing this was some sort of metallurgical failure, as two point failures are not exactly common.

Howard, I've had excellent experience with STI. I'd send that damned pistol to them, I don't care how many rounds, And they should stand behind it.

 

If you really needed one I have an STI 9mm Trojan. We'd just have to figure out how to make a legal loaner.

  • Author

Howard, I've had excellent experience with STI. I'd send that damned pistol to them, I don't care how many rounds, And they should stand behind it.

 

If you really needed one I have an STI 9mm Trojan. We'd just have to figure out how to make a legal loaner.

Thanks.  I know they will stand behind it.  I posted on Enos forum and Dustin at STI said, "We will fix the issue. Sorry for your bad luck".  I am just lucky that someone on my squad had a substantially identical (actually exact) gun and was nice enough to let me use it to complete the match.  

 

While I appreciate your offer, unfortunately in New Jermany we know such a load is not possible.  Well I guess one could do it through a sale with a P2P and then later a sale back with another P2P.  Oh well.  I am not going to like being without the STI for a while, but I'll live.  Guess it will give me more trigger time with my tupperware :)

I could work if I attended your match and loaned that way.

 

 

Sent from my iPhone using Tapatalk

I have never seen a barrel link break. I would replace the slide stop also. Barrel link's purpose is to lower barrel after firing nothing more. On return to battery the barrel returns to position by riding up on the lower barrel lugs. Something is not right with the lower barrel lugs and lockup. A link should never be used to tighten a barrel during lockup. Link spacing between the two holes can vary from .268 to .273 I believe so time for a smith to see what the problem is.

Some reading about function and effect. http://www.m1911.org/testkit.htm

 

Dan Dwyer's Group Gripper licensed to Wilson performs this feat.

 

12g.jpg

Howard, I've seen this happen to a few guns on various forums.

No definitive answers usually as to the cause, but a number of people did point out that high pressure rounds can be the culprit.

Just something to consider.

Were you using reloads? Was the load to powerful for the gun?

  • Author

Just regular factory ammo, no +P or anything like that.

Just regular factory ammo, no +P or anything like that.

Factory or Freedom reman?

  • Author

Factory new, not any remanufactured.

I use shock buffs in 1911's but I also use light springs. With full power recoil springs I don't feel the need.

  • Author

Spoke with Randy at STI this morning and he told me that I should send the barrel in and they will fix it, hopefully they can turn it around in a day is what he told me.  So, it is on it's way to Texas and hopefully I'll be up and running early next week.

  • 2 weeks later...
  • Author

Was it the 9 or the 45.

Mine is a 9mm, they make a .40, don't think it comes in .45cal.

Spoke with Randy at STI this morning and he told me that I should send the barrel in and they will fix it, hopefully they can turn it around in a day is what he told me.  So, it is on it's way to Texas and hopefully I'll be up and running early next week.

 

 

All they wanted was the barrel? -- interesting that they don't want to know the cause of the link failure

 

Yes they do make the trojan in .45acp -- I shoot the snot out of mine...

  • Author

UPDATE:  Got barrel back today with link replaced.  They said that the original link was too short which is what caused it to break.

Did they say how much shorter? That's weird.

 

Sent from my SM-G900V using Tapatalk

 

 

Good luck with it this time.  I wonder how they would know the link was too short unless they fitted the barrel in another frame. But thats not your frame.  Anyway, as I said, Good Luck with it.

 

Checko, links are fitted based on the frame and barrel fit. It's only purpose it to lower the barrel during cycling, nothing else.  Sizes vary by the distance between the two holes center to center.  Biggest difference is something like .268 to .288.

  • Author

I don't know how much shorter it was than it supposed to be, and I don't know if they just measured it or put it in another frame.  I had offered to send the entire frame in to them, but they told me that would not be necessary.  I can only guess they measured hole to hole on the broken link.  I am guessing they just grabbed the wrong one when they originally built the gun.  I guess we will have to wait a year or so to see if this stays good.

So, are you shooting it Sunday @ Somerset?

  • Author

So, are you shooting it Sunday @ Somerset?

Don't know Bob, I registered for SSP.  The old MD got pissed at me when I changed the Division I was shooting in.  The new MD just gets pissed at me all the time :)

Don't know Bob, I registered for SSP. The old MD got pissed at me when I changed the Division I was shooting in. The new MD just gets pissed at me all the time :)

Whether you're on fire or not, Howard
  • Author

Cool Stu, I think I'll shoot my Bug-A-Salt in that case!

 

angled0217_1024x1024.jpg?v=1424218014

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.