How clapped out is the rail/slide interface?

 

You are sure you put in a spec' extractor.

You replaced ejector, correct?

You polished chamber? You have new mags.

 

What about the pins that hold the ejector ( appears to be a kit) in place? Any play.

 

My minds folowing heat.

If the casings eject fine sometimes it should eliminate the ejector.  I'd look at binding in the extractor pivot or recoil spring/rod.

How clapped out is the rail/slide interface?

 

You are sure you put in a spec' extractor.

You replaced ejector, correct?

You polished chamber? You have new mags.

 

What about the pins that hold the ejector ( appears to be a kit) in place? Any play.

 

My minds folowing heat.

I dont think i understand what clapped out means?

Extractor doesnt have the extension on the bottom ( ordered it from numrich-for this model jericho ) so i replaced it with the old one( with the wolff extra power extractor spring) for now since its worn but not broken.  I might find a more correct extractor but other then the few times it ejects weakly in a row with the jamming issue it ejects fine otherwise.

Ejector is replaced ( replaced the entire sear cage )

Chamber is polished and I have 2 new different types of mags

Sear cage and pins are tight.

 

As for heat, the gun will do this right out of the gate when i take it shooting all the way to the last mag i put in her at the end of 600 rounds. I dont know of any cause for malfunction that only occurs after a string of good function.

If the casings eject fine sometimes it should eliminate the ejector.  I'd look at binding in the extractor pivot or recoil spring/rod.

Any steps / tips you could give me for checking for binding?

Clapped out= worn out.

Clapped out= worn out.

Doesn't seem worn out. When i press on the slide it doesn't click or wiggle. There is a tight spot when i take the slide off the frame but when i rack the gun its smooth all the way through.

Idk. Replace the guide rod and spring.

Some guns jus aren't bombproof reliable

You may have one