Everything posted by rscalzo
-
Goverment incentives for fuel efficient vehicles?
It was proposed but I don't think it has passed. As the regulations are bs many are fighting the waste of money except the car companies themselves.
-
Anyone rockin' a scooter?
Even the Harley guys don't buy into that any longer. When drivers fail to hear a 300 watt siren, what makes you think they will hear a sportbike? Varying tones and volume attract attention, not shear decibels. My wife had a Honda Helix a while back. Acceleration isn't the best. One local roads with speed limits of 40 and under I think they are fine. Beyond that I wouldn't be comfortable. I drove the Helix on the GSP once. It will cruise at 65 mph all day but I wasn't crazy about the feeling. Don't forget the cost of insurance which will add a few hundred for a few months of riding unless you want me to send you an application to the AMA Polar Bear Club!!! You can find used ones but the cost went up with the gas prices.
-
Glock vs Sig vs CZ
What are you basing that on? It isn't a highly stressed part. Based on Glock's experience, the rod will last for years. Even so, it will outlast some of the springs that require changing and will probably outlast the recoil spring. Even if it does break, it will not necessarily affect the firearm's operation. Years back everyone said the poly frames wouldn't last and here we are twenty years later with those same frames still functioning fine. The one group was from a 225 in 40S&W. They were replaced and no further problems were noted. Single or multi-strand makes no difference to me. I have semi-autos in both styles and they all work. Just because a manufacturer changes a spec everyone seems to make a ton of unsubstantiated comments. They are now made a few miles away by basically the same employment pool on the same machines. Sig can keep everything the same and raise their prices up to where S&W went with their third gen. right up to the point of discontinuing the entire line. there is a point where people will stop buying. Sig is no more expensive than the other quality alloy/steel framed firearms. Do you know of any manufacturer that doesn't change any parts over the years? None keep things the same as vendors change, availability changes. You can get a new H&K handgun for less that $800? Not from what I've seen. The going rate starts at $800 and goes up from there. Pricing is almost the same for both manufacturers.
-
Shooting in the ocean
I would say that using a firearm anywhere within the 12 mile limit might be inviting a visit from the Coast Guard or local Marine Police. Neither would be much fun. Not to mention the effect the salt air would have on the firearm. Add to that any possible ramifications of dumping items in the ocean. This has been somewhat to norm on one local dive boat that was eventually screwed through complaints. the complaints went up the chain and caused the Captain some grief. If it were me, I would avoid it.
-
Glock vs Sig vs CZ
They are a totally different animal. It has a polymer frame with a removable frame. The feel is totally different as the 250 felt much narrower and lighter than the 220C. Cost is also much less on the 250 series. As far as the complaints of Sig vs. CZ, the numbers Sig has out on the market far exceeds CZ. Odds are more might have a negative comment just based on the numbers. Or some just like to bit*h so they can join in. When it is a major issue simply because a company changes the box the firearm comes in then I think some people have nothing better to do with their time.
-
for those that are looking to laminate their FID cards
I trim after as it was just easier. We had a large commercial paper trimmer that made it simple and neat.
-
for those that are looking to laminate their FID cards
I trimmed mine after I laminated it.
-
.22lr conversion kit on a G17L
Every 22lr conversion I've seen does the same thing. I think the only exception was a Colt Ace a friend bought a while back.
-
Glock vs Sig vs CZ
I thought the blue stripes are for the new ones Sig changed the color designation a while back. The band could be either color depending on when it was sent out. As for the changes, most of the experts posting have never owned one and yet are an expert. Having friends in Customer Service at the plant it's amazing what some complaint about. One owner insisted on returning a handgun that he declared faulty because when he tried to chamber a live round in his home, it did not go into battery. Never firing the firearm, he wanted it returned. Some see marks on the extractor and send them back. If they knew the handgun, the marks determine in which firearm and caliber the extractor is used. Plastic guide rods???? My God, they can't work.Wait, doesn't Glock, S&W, Springfield and others used them in some models? Yes they do. The springs were changed because in some calibers they were a problem. the multi-strand springs were used originally in the extremely cold European climates. A single strand has served the 1911 series, S&W first through third gen SA and others. some just want to complain and found some will listen to anything on the Internet. The best case was the claim the 220C was faulty. Thousands were shipped and worked fine. A few had a problem and the ball started rolling. It was historical to see so many who never actually saw one commenting on their lack of reliability.
-
New Gun Safe
I doubt it is fireproof. After having a friend go through a recent house fire that totally destroyed his home, one of the few items surviving was the fireproof safe. Slight moisture managed to find it's way inside but the firearms were still in great shape and needed only a good cleaning. Our club picked up three safes from Sam's Club for $600 each. They have electronic locks which can be a problem at times but the safes do what we need them to do which is store firearms and are somewhat fireproof. The fire angle was not an issue as they are in a block and poured concrete building. If moving the safe is an issue, look into these safes. Several members bought them on a group buy and were extremely happy with them. They are not cheap but well built and easier to move than most. http://www.zanottiarmor.com
-
Stupid question... but what does "grain" size mean?
Probably closer to 950 in a 4 inch handgun based on our experience. Handloading would be the way to go using a slower powder and testing on a chronograph. My thinking is the slower moving bullet allows the small powder charge to completely burn before the bullet leaves the barrel causing barrel friction to slow it down somewhat. But that depends on the makeup of the round itself. The subsonic worked best in the MP5's especially when suppressed. Supersonic rounds defeat the idea of a suppressor to a large degree. But to cut down the need for different types of 9mm, we settled on the one 9mm load as lousy as it was in real use.
-
.22lr conversion kit on a G17L
Several friends have them and they work great. Ammo selection is required as the make and type does effect the proper functioning.
-
for those that are looking to laminate their FID cards
In our department a replace only card was not a big deal. Address changes in voling different towns was a bit more complicated. there is no reason you should not retain the old card while a new one is being processed. However you would be required to turn in the old one before a new one is actually turned over to you. If I were you, I would start the process before the old one becomes illegible and therefore not acceptable by a FFL or ammo dealer.
-
HK MR556
The Sig 556 series has a gas piston.
-
for those that are looking to laminate their FID cards
We laminated every card before it was issued (hopefully after it was signed and the print rolled). We would laminate any id cards the applicant wanted as a courtesy. The plastic cards are really cheap when purchased in bulk.
-
HK MR556
They are being built at Newington for the past few months. Apparently they want to the the production fine tuned and adequate numbers manufactured afore they are released. The plant isn't that big so I don't see them coming out in large numbers anytime soon.
-
Ruger Blackhawk question
I would say it is an excellant deal. The minor wear to the bluing should not be an issue. Just keep the exterior lightly coating with oil to prevent rust.
-
WTK: Any NJ shop have an RRA stripped lower in stock?
Not NJ but you can try Pete here. He's a big dealer in RRA rifles and parts. You might get lucky. Shipping should not add much to the price. http://www.ar15sales.com/index.htm
-
Need some guidance revolver guys!
You have a square butt K-frame. Does the box possibly say round but K-frame?
-
Ruger Blackhawk question
Just beware of the safety issue with them. Not a big deal if handled correctly for a single action revolver. http://www.ruger.com/Firearms/PDF/Safet ... thCare.pdf Some were modified to incorporate a hammer block. A gunsmith would probably be the best way to determine if it was converted. Ruger will convert it. Info as listed... http://www.ruger.com/Firearms/PDF/Safet ... fferAd.pdf
-
S&W MP15
http://www.ar15barrels.com/ They will do it.
-
S&W MP15
No, they are not. Some produce their own major parts in their own facility. Many do subcontract out the major items. Smaller items are sub-contracted out by most companies. Ruger happens to have two major manufacturing facilities in the New England area. I would not doubt they produce most of the parts in their own shop, as does S&W. Bushmaster on the other hand manufacturers nothing themselves.
-
New rules or the state police having fun..?
If you didn't mind them either losing or forgetting the order. They pissed me off so bad one time I canceled the order and send a letter to my LE rep. He passed it one to Ray himself who must have reamed the salesman. He made him drive my order up to my house that day. Guess you didn't want to get on Ray's wrong side. If it wasn't for Dwight I think the gun department would have wsent under.
-
Storage Devices
Any safe or cabinet should have Golden Rod heaters in them. They cost only pennies to operate and will keep the interior free of moisture.
-
New rules or the state police having fun..?
It is store policy. The state has not mandated any such policy. A saleperson can only deal with one person at a time unless they want to have a firearm stolen as was the case with a former dealer in Jersey City. This policy cuts down on those not able to purchase. Their shop, their rules.