Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

raz-0

Members
  • Joined

  • Last visited

Everything posted by raz-0

  1. I like 4sevens/foursevens, good lights, and they are very honest about output numbers. They aren't searchlights though. I ahve the maelstrom MMU (much closer to a pocket searchlight at 800 lumens) as well as some of their quarks. If you want really bright they have their mmu-hd at 1200. Nitcore also has the little monster which they claim at 2000 lumens.
  2. Some people just blind pin, because NJ statutes don't define what is permanent, and the reality is that it takes basically the same tools and effort to undo it as pinning and welding. Some people pin and weld because the BATFE has declared that to be a permanent attachment method, and should one need to argue it in court, it can be argued. Which argument would you like to have if it comes down to it? Myself, I don't like the fact that the BATFE sasy a blind pin alone is not considered permanent for extending a short barrel to 16". SO I see it as I can argue a blind pin, and they can argue back that it would unambiguously be illegal on a 14.5" barrel by BATFE standards. Or I can argue I followed BATFE guidelines for permanently extending a short barrel, and they can argue that it's not sufficient and then try to argue non-existent guidelines to a jury. Pin plus a spot weld and a clean up is harder to screw up with regards to preventing removal IMO. I suspect that is the reasoning for the BATFE considering a blind pin only less than permanent for extending a short barrel.
  3. Keep an eye out then, I will probably be unloading one of this in the near future. It's well loved, and won't be $1200. Needs a new front sight though and a good once over, before I sell it.
  4. Lead deforms easily and creates a better seal earlier. Which means higher pressures with the same amount of powder. Jacketed doesn't deform as much and causes a more leaky seal, so less pressure for the same amount of powder. Plated is somewhere in between depending on alloy, manufacturing method, thickness of the plating, etc. Rainier I load like lead and bump it up if the velocity isn't there and it doesn't show pressure signs. For Berrys regular flavor I'll split the difference between lead and jacketed and work form there. For berry's double struck I load like jacketed, as well as for extreme and bulletworks. The caveat to that being I'll chack FMJ vs JHP loads for that weight in the data. JHP tends ot be longer. If they reduce for JHP, I use the JHP data as it means the powder is more sensitive regarding case volume, and that may also apply with regard to the mroe ductile bullet hitting the rifling after the freebore.
  5. raz-0 replied to NJKen's topic in AR Discussion
    Between the SSA and the RRA 2 stage, mostly jut things like smoothness, how the takeup feels, reset length and strength. Between the SSA-e and the RRA.. that plus about 1lb of pull weight. In terms of quality the Geissele is built better and through hardened.
  6. I've met one non-leo with Ccw. A town councilman.
  7. Well I'll give you my take. It's not a flash hider, nor is it a brake. It's a stupidly designed pokey bit for the front of your gun. It appears to have a high pressure chamber with four vents, and then the four tines. Regarding flash, what should happen is you get a jet of flame out of each nozzle which line up with the tines, and then flash from the gap in each tine. this basically means that you get an eyeful of flash with each bang, so it doesn't help preserve the night vision of the shooter. It also doesn't do much to prevent detection because the vents at 2, 4, 8, and 10 o'clock are going to create nice rooster tails of flash in profile and head on. That's why it's not a flash supressor IMO. Unless the ammo is low enoguh pressure that the high pressure chamber doesn't work. In which case it may actually suppress flash a bit. Then you have the muzzle brake part. It has the four vents. They do not appear to be vectored rearward, so they won't check rearward recoil. The vents are also symmetric top to bottom and left to right, which basically means that in the face of even and symmetrical forces (i.e. a rifle magically floating in mid air), they might anchor the muzzle a bit, they won't do so once you put an actual skeleton behind it. So at best, you get a little bit of a recoil check by the gasses hitting the baffle at the front of the high pressure chamber, but likely not as much as if the baffle had large open ports to vent it. Add to that that 7.62 isn't that high pressure and it may not even do that.
  8. They are hoping to get a little bit of legislating from the bench. Perhaps if is a ny company, and a ny sale and a ny victim, they think they can argue that the federal law isn't binding.
  9. Round count is going to be about 150 You want to bring enough to reshoot a stage, so add another 25. Then you want some margin for missing, so add another 20%. So about 210. 200 and you might run out if you aren't accurate, and have to reshoot a stage. 250 and you should be very safe.
  10. Sounds like it might be time to replace or refurbish some of the steel. The only way I can think it would get you with force from an adjacent pit is if you were near the end of the pit and it boomeranged around. Kind of like when you were a kid and cut up Manila folders into squares and flicked them around class.
  11. Did they go after the seller or the purchaser? Last time I paid attention, it was the purchaser.
  12. I'll be there. BTW, good news, we have been approved to spend money on electronic scoring. WE might have everything together to go electronic for November.
  13. There's a heck of a lot more calibers than .308 that won't work. Even without going for something I can't get in an ar-10 either, there's 6.5 creedmore, .243, .260 remington, 7mm-08, .444 marlin, .284 win, .35 rem, .300 savage, .450 marlin, etc.
  14. raz-0 replied to NJKen's topic in AR Discussion
    It's WAY better, not even remotely in the same class.
  15. Actual purchase that got me strange looks at around 1am at the supermarket. One quart 10w-30 motor oil, one tub of chocolate frosting, one pair of rubber gloves.
  16. This is something we will have to deal with. In the race for the cheapest labor and price, materials science and automation are taking huge leaps in technology and affordability. Bio weapons need the gear of your basic microbrew and a couple smart people. Explosives have been that way for a while except for less equipment and people. Mills, cnc, 3d printing, circuit printing, etc. You could probably build a pretty functional explosive laden autonomous drone for fairly cheap. In many ways the stuff with Iran and nukes is a slightly larger scale of the same thing.
  17. 10mm 6mmx45 6mm AR-p 6mm ppc .264 lbc .410 upper if you can dig one up. And don't forget the crossbow upper and black powder upper. And don't tell anyone, but they'll fit whatever ar-15 lower you have even if they DON'T say multi.
  18. I haven't handled anything but the sd3g in the Geissele trigger line up. I have handled the timney 3lb as well. The timney feels like a single stage trigger with a bit of slop on initial take up. Mostly it feels like the trigger return spring is really light, but sufficient to reliably reset the trigger once you let go. It's not enough slip to prep the trigger though. The sd3g is not a single stage trigger. It's a really weird two stage. You can prep it some. Overall, it's tight and smooth compared to the timney. If I wanted a tight, crisp single stage without take up or creep, I'd go Jp. If I wanted light single stage with a bit of take up, I'd go ar gold. If I wanted 2stage, I'd go Geissele. The timney isn't bad, the competition is just quite good, and although the solid trigger version is more affordable, the price difference just isn't that great.
  19. Just realized I left something out. shorter time in flight gives you less time to be affected by wind. It doesn't make it more accurate, but it does make it a bit easier to hit what you want to hit. HOWEVER, to go faster usually means a lighter bullet, which means it is more sensitive to wind even though it is exposed to less of it. A longer barrel gets you some speed without changing bullet weight.
  20. In general, yes you can. There are some caveats, like knowing which primers are slower and which are faster. IF you are at the ragged edge with federal small pistol for pressures, switching to winchester SPM may cause issues. For 9mm it generally won't as brass is generally all dimensioned for +p loads even if it wasn't a +p load to begin with. I don't recommend it without access to a chrono unless you are loading well below max load. If you are near max and know your load's velocity, back off a tenth, chrono, if it slowed down and there are no pressure signs, put the tenth back.
  21. Sorry, no. NJ cannot regulate commerce in other states. The ONLY reason that NJ firearms regulations are followed in other states is because FEDERAL law regulates the commerce in firearms as defined by the FEDERAL government. Outside of NJ, bb guns are not firearms, and nobody gives a crap what NJ says about bb guns when the commerce is occurring wholly within a state that is NOT nj. Kind of like while Nj was holding onto the 55 limit. We're new jersians obligated to go no faster than 55 wherever they drive? No, because NJ law ends at the nj border with a few exceptions.
  22. Think about when most reviews are written. It's shortly after purchase. They are comfy and fit well, but they are ugly and trashed after 6-8 months.
  23. Wolf small pistol have always had reliability issues. There small rifle have been much better and will work for pistol loads. If you are at max load, back off a tenth.
  24. You got that wrong. Cerakote is bake on. Durtacoat comes in air cure and bake on versions.
  25. Moly is less smoky than lead, but still smoky. For .45, the bayou bullets may be the least smoky. Smell like burnt tires though.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.