Everything posted by rauchman
-
Tell me about your experiences w/ the M&P
Greetings, I'm looking for user feedback on the M&P. I currently have a smattering of different pistols and am toying w/ some kind of M&P. Currently have 2 - G19's, G17, Sig P226 9mm, HK USP45F, Beretta 92FS, HK P7, SA 1911 Loaded. Recently sold an XD45 Tact and am trading an XD9 Tact for a G26. Handling an XD at the Bullet Hole, it seemed very nice. When actually shooting it, I realized I liked my Glocks better. I've read some good things on the M&P. Particularly interested in the .45 (fullsize & compact). I'd love to the get the 9mm, but I have a problem w/ a 17 round mag being neutered to 10 rounds. .40 is a possibility.
-
Gathering interest - NJGF engraved AR Lowers
I'm in. May have a couple of friends that would be interested in this as well.
-
New Rifle in 308
I have an Armalite AR10A4 that I bought used last Jan. in the Bullet Hole for about $1500. I LOVE this rifle. It's pulling 1.5" 5 round strings at 100 yards w/ SA surplus ammo. I'm itching to get some quality ammo and see what it can do. Also, AFAIK, only Armalite and SA offer 15 round mags available for the AR10 / M1A1. Armalite is currently running a sale on mags. I picked up 5 - 15 round mags for $150 bringing my total up to 11. I understand these rifles can be made to rival bolt actions for accuracy. Scope mounting and ergos, it beats anything else out there. So far, my rifle hasn't experienced any failures of any kind. Recoil is in the M1A1 zone.... you know you're shooting something with more ooomph than a .223, but it's pleasing and not excessive.... kind of like shooting a .45 vs. 9mm. What are you getting the rifle for? Target shooting, hunting, SHTF, etc? My next .308 is either a bolt (Savage or Remington) or ........... the Saiga .308. I've been reading about this rifle for a while, have handled a few in stores, and have a real itch for this one. From everything I've read, accuracy is on par w/ a lower end M1A1, they are roughly half the price of a lower end M1A1, scope mounting is better on the Saiga vs. the M1A1, and they are as, or more reliable than a SA M1A1. Only downside I see is access to mags. Also, they look good as stock, a Dragunov clone, or a total conversion. I've read reviews on numerous sites and haven't read a single bad one... unlike any other rifle out there. I love my AR10, but want something I can knock around a bit, sort of a Glock of rifles.... Saiga.
-
SO I finally got to shoot the XD
Is the M&P9FS, the full size model? Am I correct in assuming that there are no 15 rounders available for this model? Which size backstrap were you using? I'm getting an itch for some kind of M&P model myself. I recently handled an M&P45Compact and REALLY like it. Are all the M&P's available w/ thumb safety? I would prefer this. I'm still in my 9mm Glock phase, but could foresee including M&P's in my collection.
-
Another .45 for my next purchase
Ironic, I'm looking for a new plastic fanatastic .45 as well!!! Like you, I have a USP45F and a 1911 (although mine's a SA Loaded), and I have owned, and recently sold, an XD45 Tactical. At 1st, I was really hot on the XD. I dried fired it quite a bit and got the trigger pretty smooth. It does have a long reset and feels mushy. Does not have a crisp break in the trigger pull. I understand the aftermarket can help in this area. I sometimes find the USP to be a bit of reach from the web of my hand to the DA trigger. Conversely, I found the XD to be too short in this area. It didn't feel like a "natural" point at where the trigger is pulled and where the break is. Also, I dry fire practice nightly w/ a Glock 19, so it's very possible that I've built up muscle memory to the point, where anything else feels weird. Although, I still think a Sig P226, the USP, 1911, etc, all feel pretty good. The grip, while not thick, is very long - it does accomodate 13 round mags after all. I found that I really have to concentrate on keeping the gun still during the draw of the trigger pull. I get lots of lateral movement on the sights. I think these last few criticisms would be alleviated w/ dedicating myself to practicing on this platform though. The gun itself was very accurate. At 15 yards, was able to put 3 - 5 round strings into less than 2" slowfire. It does have a relatively high bore axis and it's noticeable when shooting. Something along the lines of a Sig P220, if you've ever fired one of those. The 5" slide and barrel were very nice though. I've heard some people complain about the grip safety. It didn't bother me one way or the other. The slide can not be racked w/out depressing the grip safety though. Curious to get your thoughts on the FNP, as this is one of the options I was looking for myself.
-
FNP-9 magazine question.
well that sucks :evil:, been looking around and can't find the 9M any wheres. Bullet Hole had one some time ago. Don't know if it sold or not. Give them a call.
-
FNP-45
I just sold off an XD45 Tactical to a member here and am looking to get another .45 to replace it. I've been following the FNP45 for some time. Did you get the "G" model w/ cocked n locked capability or the standard model? Did you get extra mags? If so, what did they run? Were they relatively easy to get? Did you get a holster? If so, what brand, $, and so forth? Does it run hollow points/semi-wad cutters well? I've never fired this gun, but have read rave reviews about it and have handled it at the Bullet Hole. Right now, I'm between this, a Glock 21SF and a S&W M&P. Thanks, Ken
-
New Beretta Storm
Higher velocity and more accurate than a handgun but still nowhere near the velocity/energy of an AR or AK round. For an HD gun in a populated area though, that's not necessarily a bad thing. With hollow point ammo chances are you won't penetrate the next 2 houses over with a missed shot. I can use the same ammo in both my glock and my storm. If I had a beretta pistol as well, I could even use the same magazines. Any idea of the velocity increase? I'm guessing you'd get the biggest bang for your buck (velocity increase) w/ .40 ammo. If you could get the 180 gr .40 to 1100-1200 fps, you're into 10mm territory. While having less ballistic capability than a typical M4 setup, still, this would be viable for 100 yards or less.
-
HK USP 40 PICTURES
I have an HK USP45F, SA 1911 Loaded and XD45Tactical. The USP is the easiest for me to accurately. I can shoot the USP, 1911 and XD to the same level of accuracy (5 round slow fire groups at 15 yards into 1"-2"), but the XD is, for me, the hardest to shoot to that level. The USP is easiest .... for me, and the USP groups tend to be more in the 1" range. I think a lot of it depends on the user's hands. The XD Tact is a great looking gun, at a great price (paid $500 for mine) and packs 13 rounds in the mag. If it works for you, go for it!!! Haven't fired the HK45 yet, but have held one at Bullet Hole. This and the HKp30/L are the best feeling guns I've ever put in my hand. I love my USP, but it feels like a brick in comparison the newest HK plastic.
-
Best tactical .45
Really, you have to shoot them to see what works for you. I have an HK USP that I love. Is very mechanically accurate and is easy to shoot accurately. Have heard great things about the HK45 as well. I have an XD45 Tactical (5" barrel and slide) that I loved when holding it in the store. Bought one, and while it's mechanically very accurate, it was hard for me to shoot accurately. Currently up for sale. My buddy has got a couple of Sig P220's of West German manufacture that are oustandingly accurate. We went shooting at the Bullet Hole and we swapped, my HK USP and his P220. I put a shot on paper at 15 yards and every subsequent shot, I thought I was missing until we pulled the target in. The group couldn't have been larger than 1/3". Granted the Force left me after that and the best I could do on subsequent 5 round groups at 15 yards was no larger than 1". Again, the P220 has EXCELLENT accuracy.... for me. I'm sure there are others that will shoot it and be better on other platforms. A word on Sig, if you decide to go with any Sig varient, I highly recommend a gun from 2004 or before. Since then the previous CEO of Kimber took over and their QC has received much criticism. I've read a lot on the FNP45 and it continually gets great praise from it's owners. Only downside here is the lack of accessories.... mags are not the easiest to come by and holster choices are lacking. The S&W M&P gets a lot of praise also. And of course, there is the Glock. I've fired a G30 some moons ago and was floored by how accurate it was. I'm really interested in giving a G21SF a spin. If it were I, looking for the uberist tactical .45, and money was not an issue, the HK45 would be in my hands, no question. Edited to add - After actually READING your post :mrgreen: ... I see you already have the P220. If you don't want plastic, aside from a 1911 or the P220, there aren't many options out there. The CZ97 is supposed to be pretty good, but I've read it doesn't do well w/ HP ammo. I'd still have to go w/ the HK45 though. Match accuracy, rail for lights, 10 round mags and price under $1K. If it's anything like the USP I have, it's a tank.
-
FN P45
I've handled one at Bullet Hole and it seems like an HK USP for less $. Haven't fired one, but from the user reports I've read on AR15.com, The Firing Line, FN Forums.com, etc., universally the pistol is very liked. Very accurate and reliable. The "G" model (has thumb actuated safety for cocked 'n locked, like the USP) is the one I'd go for. It comes w/ at least 2 mags, maybe 3, and one of them is definitely a 15 rounder, the other(s) is/are 14 rounds. Only downside I've seen is that mags aren't the easiest to come by, they are a bit pricey and holster selection is very limited. In comparing to an HK USP45F (since I own an HK USP45F), ergo's are very good and the slide doesn't seem as high bore axis as compared to the HK. I thought in handling it, the sights were pretty decent as well. Trigger on the FN is arguably better/lighter, especially in DA. Again, from the range reports I've seen, the pistol is in the same accuracy class as an HK USP45F.
-
Hi-Power versus Beretta 92F
I own a Beretta 92FS (actually, it's my wife's) and I've owned and sold a FN BHP. Beretta - Super sexy gun that was one of the high cap 9mm's that became popular in the 80's. I find the grip a little too big, especially for DA shooting. Very accurate. Sights are better for fine shooting vs. fast defensive shooting. Like the takedown / fieldstrip method. Chrome lined barrel and chamber and very reliable. It's rare I read about this model having reliability problems. Not a fan of the frame mounted safety/decocker. Hardly ever shoot this pistol anymore. For this type of gun (high cap 9mm DA/SA), I prefer the Sig P226 or HK USP / P30/L. Browning High Power - The original high cap 9mm. Up until the 80's, this was probably the most used pistol in the world. You look and hold this pistol and wonder, how can a design from the 30's be so much more compact and ergonomic than the majority of pistols produced today, including the Beretta 92SF. Ergonomics are EXCELLENT!!! 15 round flush fitting mags are easily gettable. I so wanted to love this pistol. It's slim, compact, yet has a 4.5" barrel, has good to great accuracy, as mentioned, the great ergo's.... but.... It has the WORST trigger pull I've ever felt on any pistol. And yes, I removed the mag disconnect and the trigger still sucked. The trigger is a thin metal blade and has a feel that's synomymous with a crappy toy or BB gun. I understand Cylinder & Slide has an aftermarket trigger that is considerably wider and smoother than stock. Also, yes, the hammer bite. I have mediumish hands, but have a meaty area between thumb and index finger, that would hang over the tang of the beavertail (should really be called mousetail since it's so small). I like to hold very high in my grip, so of course every shot was an excercise is masochism. I understand there are aftermarket hammers that fix this. I didn't want to be bothered w/ the "fixing" of the pistol to get it right and I swapped it for a SA 1911 Loaded. I'd love to shoot a BHP w/ a good trigger and aftermarket hammer. I have to believe it would be a beautilicious shooter.
-
Opinions on the G21SF
Excellent info and thanks!!! I've held one at Bullethole and REALLY liked it. Not to crazy about the limited support...holsters, mags and what not. I'm becoming less of a fan of the DA/SA transition though also. I'm not ruling this out either. I held the M&P 45 Carry w/ thumb safety (think that's the model) at the Bullethole. I'd be very interested in shooting one 1st. I've shot the M&P .40, and while nice and more likeable than the G22, I wasn't overwhelmed with it. I think that's more symptomatic of my dislike for the .40 though. I'm a 9mm & .45 guy at heart. I remember when I got my USP, I was in love. I've held the HK45 and P30/L at....where else... the Bullet Hole and was really floored by how perfect they fit my hands. I will get both of these pistols at some point, but these would be pistols that I'd be very paranoid about somebody looking at them wrong, or sneezing on them, or something. Strange, these pistols are probably some of the toughest out there, but the thought of actually using them the same way I'd use a Glock seems sacriligious. One of the things I like about Glocks is, I don't feel bad knocking them around, dinging them, using them as a hammer (kidding) and what not. My wife owns a Beretta 92SF. While it's a nice pistol, I can't say I've ever been enamored with it or other Beretta pistols for that matter. Never been a fan of the slide mounted safety/decocker. The only DA/SA pistols I'd really consider are the HK45 or Sig P220 match. Thanks for the all the replies!!!
-
AR Triggers.... which one?
Thanks, I'll be looking into this.
-
AR Triggers.... which one?
Thanks for the info. I was thinking of the RR trigger for the more "tacticool" rifles and a Geissele for the SPR'ish rifle I'm building. Overall, I've read good to great things about the RR trigger. Light and smooth enough to make a noticable difference over stock, but not too light as to possibly be a problem. The Geissele I'm not as familiar with, but have noticed they seem to be gaining in popularity. I understand there is a Tactical version and a Match version. I'm guessing this means that the Tact is lighter than stock, and the Match is lighter yet. Any info on what these weights would be? I've read that w/ adjustable triggers, there is the chance they may unadjust themselves after much use. Any info on how the Geissele trigger is this regard? Edited to add, how does the RR trigger differ from the Geissele Tactial trig?
-
Motorcycles..
Yup, I ride too. Currently have a 2007 SV1000S. Love love love the engine, hate hate hate the ergo's. I've added Convertibars and Sergeant seat and the comfort still leaves something to be desired. Started riding in Sept 2002. My wife (then girlfriend), in 2001, decided she wanted to learn how to ride. We had a friend that used to have a MC riding school and he taught her. She got a Honda 750 Shadow ACE, after having a Honda Rebel for a few months, in May 2002. She left it at her mom's and we went to go pick it up. Twas right out of a commercial.... the garage door opens, the sunlight glints off the chrome, I ride it up and down the driveway, and I'm hooked. I sign up for the MSF course at Fairleigh Dickinson and get myself a brand new 2002 silver SV650S.... really liked that bike. Everyone I knew who rode at the time rode cruisers. Sold the SV and got a 2002 Yamaha Roadstar. 2003 was a big MC year for me. When I got my MC license, it seemed everybody was getting their MC license. My buddy and I, who just got his license as well, went to go visit a friend in Phoenix. The 3 of us rented HD's and cruised the desert. Love them or not, riding an HD through the desert seems exceptionally RIGHT. That summer my wife and I and 4 others rode up to Nova Scotia. It was THE coolest vacation I've ever had. My grandparents had just moved out to Tuscon late that spring and my wife and I went out to visit. While we were out there, we eloped on a hot air balloon on the north side of Phoenix and rented 2 HD Fatboys and rode up to the Grand Canyon for the honeymoon. A most excellent trip. So, now my wife rides a 2003 Kawi Z1000 and I have the SV1000S that I'm probably going to sell this spring and either get a Bandit 1250 or a HD Superglide..... money permitting.
-
AR Triggers.... which one?
Greetings, Just picked up a lower that I'd like to make into an SPR'ish rifle. Deciding on which trigger setup to use. I'm looking at the Rock River NM trigger for $130 or so. Any opinions?.... other triggers that I should be looking at? Also want to replace the triggers in my 3 other AR's. 2 of the 3 are general use carbines that and the other is an Armalite AR10, again, I'd like to replace their triggers w/ the RR NM. Thoughts???
-
Scored an AR15 complete lower at Orange Cnty Fair Grnds
It means rauchman has the foundation to build a kick ass SPR, that's what it means.
-
Scored an AR15 complete lower at Orange Cnty Fair Grnds
Yup, good catch. I purchased a LOWER, not an upper. This is going to become an SPR type rifle.
-
Scored an AR15 complete lower at Orange Cnty Fair Grnds
Bizarre.... absolutely!!! From what both vendors said, a totally stripped lower could be made into a "pistol" and therefore has to be sold in state. O lower w/ LPK can be sold to an out of stater, or at least that's what the vendor said that sold me the lower. Even he admitted, the law was very strange. I don't get it, since, obviously, a completed lower could be just as easily made into a "pistol". The 55gr PRVI was $449/case... I think. I understand this load developes a true 3200fps out of a 20" barrel and is constructed very similarly to Lake City 55gr M193. This load is not the most accurate, but does get milspec velocity and is of very similar construction. I think 2 MOA is pretty standard for this load.
-
Scored an AR15 complete lower at Orange Cnty Fair Grnds
Greetings, Was at the gun show at the Orange County Fair Grounds this past Saturday. Pretty much the same vendors that were there last March. One table was selling AR parts, but wouldn't sell a stripped upper to a NJ'er. Found another table with the same policy, however, this table also had completed lowers (basically a completed lower w/ pistol grip, but no buffer tube) that he was willing to sell. Anyway, picked up a Yankee Hill Machine lower for $225. Thought the price was decent considering it was a completed lower. One of the ammo tables had lots of PRVI ammo in 55grM193 and 62gr M855, but no 69gr or 75gr match. I've never used this ammo, but have read from numerous sources that it's very accurate. The M193 is supposed to be actual Mi-Spec as is the M855. Couldn't believe the prices on pistol ammo. Amercian Eagle 9mm 115gr FMJ for $18/box of 50. Anyway, walked away with the lower, a G19 mag, a vice block for an AR15 upper, and a new forward hand grip for my wife's AR.
-
Action shooting ranges?
..... and thank you too. Having the map helps.
-
Action shooting ranges?
Thanks for the info. When my grandparents were alive, they lived in the Glenwood apartments in OB between Rte 9 and Rte 516. Can you tell me where the range is in relation to this area? The outdoor range is 2 minutes further down 516, on the very end of "the other" jake brown road. (By Double D's Catering) The indoor range is on Maple Street, off Rt 18 behind the wawa. Excellent and thanks!!!
-
Action shooting ranges?
Thanks for the info. When my grandparents were alive, they lived in the Glenwood apartments in OB between Rte 9 and Rte 516. Can you tell me where the range is in relation to this area?
-
Cherry Ridge Signup Sunday
So this means you're coming to the Shoot next Sunday? Details???