junkmanted

what still no pictures ???? When you get tired of that M28/76 let me know

that was pretty cool even with the sound off . i think spotted a HOOKED QUILLION Bayonet

check with this guy , he has made some for other members here . Just PM him over on the other site. Most of the time he has you buy your mags and have them sent to him, but check with him. http://www.akfiles.com/forums/showthread.php?t=72855

he's over on akfiles, good guy to deal with http://www.akfiles.com/forums/showthread.php?t=72855

HA HA HA This is getting Entertaining

You would not last 3 seconds in a Zombie situation thinking like that! You never point the muzzle at yourself! .You use the battle axe like a Pugil stick by sweeping the butt towards the Zombie in a slicing motion

I didnt know that !! But I also have never seen a brake with that big of a weld

call the store and see whats up

the edge is blunt ! he gave it a sharpened look

tack weld it ! if you pin it you need to weld up the hole anyway maybe try a drill bit to clean out the treads then cold blue the inside

Well heres a U.S. made part for you called the Zombie Chop Battle Axe

A friend of mine makes these he will be the Allentown show this week end ! Called Zombie Chop Battle Axe Im trying to get him to make me one for my VZ58 ebay Member id kmanator Ya not a NJ gun PA

i would pick a different brake because when you pin or weld it on it becomes an extension of the barrel thats just my thought

+ 1 for vladtepes

its not worth the trouble. And welcome to the forum

get a 100% receiver dont mess around and get a matching numbers kit so your head space is good ,, this will save time make your rivet squeezer out of a pair of bolt cutters , and you dont need a press, a good heavy vice and a dead blow or large plastic hammer will work to replace the barrel. to remove the barrel pull the pin then place the outer part of the trunnion on the vice jaws with barrel facing down, use a brass or alum punch grab them with vice grips (the hammer hurts) and go to town dont be a girl hit it solid. they also have 2 plates with the rivet dimples drilled, you clamp them on the out side of the receiver over the front trunnion with threaded rods and a plate on the end , so you just slowly turn them in and that pulls the barrel in,, grease the barrel 1st. they also make a jig fir the trigger guard but you can also use the vice if you open the jaws and place the rivet heads on the jaws then crush them with a punch and hammer. just search the net there's plenty of step by step instruction just pick the best one for you A drill press with a vise is the best to drill out the old rivets use lots of oil a good bit and go slow , on some if you grind them flat they will just punch out. AND DONT DO A SCREW BUILD that just looks crappy but it works

sounds like a double tap to me take out the FCG and make sure the edges are smooth then oil up every thing, As far as the recoil in 223 get your self a little hart pillow or a Maxi pad

Post pictures of your new PAP and as far as a brake with 7.62x39 I feel its not worth the work. if you do dont forget to weld it

very nice and i like the wood

Dicks or a similar sporting goods store will have it, its cheep maybe 5 bucks just dab it on then oil it up and let it soak in

use a dremmil with a cut off wheel then cold blue it . about a 3 min job

I see them going for around $200 + -

Hey the barrel is still good There was 1 for sale on gunbroker about 6 months ago with a crack

pretty cool !! Lota fun just cleaning and oiling it up

Theirs many AK variants available to you ! What I would do 1st is see what your dealer is comfortable transferring to you, and see if the selling dealer is willing to sell to NJ. And yes the Mac90 takes double stacker mags