Everything posted by lunker
-
PMC 223 Ammo $6.49 Cabelas with $5 shipping
Ordered 25 boxes. Yee haw!
-
Fort Dix this weekend?
It's the girlfriend or the Poconos on Sunday. If I skip the Poconos, I can't skip hanging out with her. Hopefully the following weekend is just as nice and people want to go to Dix again. That is a "boys night out" weekend.
-
AR 10 Type Rifle advice needed
http://www.gunbroker.com/Auction/ViewIt ... =151372175 Just a though to save you some moeny if you're interested... .308 Winchester can get 85% of the performance of modern 30 '06 with a shorter (i.e. easier to manipulate in bolt and semi-auto guns) case. It's performance can easily exceed old surplus 30 '06 that people feed their M1 garands. There are a lot of AR makers out there who make .308 uppers. Armalite Rock River DPMS and more I'm sure
-
Fort Dix this weekend?
Ugg. I have to meet Matt in the AM then drive to the Poconos in the afternoon. I would love to shoot at Dix instead.
-
Gunshops near the Poconos
Thanks guys!
-
Gunshops near the Poconos
I am coming up from Sandy Hook. Normally I take Parkway to 287 to 206 to 80. I can cut through PA though.
-
Gunshops near the Poconos
I am going to be headed up to Lake Wallenpaupack early Sunday afternoon. Are there any "must see" gunshops that I should pay a visit to? I can print up a few NJ COE Rifle forms to bring with me in case they don't have any of their own. I am not as concerned with ammo since I roll my own.
-
Who do I get mad at Remington, Bullet Hole or myself?
How about if you went to the dealership and bought a special model Mustang GT that they had in stock (knowing the specs for them from Ford's website)? And if certain dealerships special ordered it with cheaper tires and a smaller motor, still called it a Mustang GT, but charged the same as other dealers did for the better version? Would it be your fault? Mostly. Is the dealer a scumbag taking advantage of people not comparing details (after all a Mustang GT is a Mustang GT, right?)? Absolutely.
-
Who do I get mad at Remington, Bullet Hole or myself?
While people make valid points about buyer responsibility, there are examples of sellers in other industries advertising products that strongly resemble what you are looking for but are missing a feature or two. I don't remember whether it was here or at another forum, but I had an argument about box retailer practices. It seems they would list electronics whose model number varied by a single letter from a higher end model. I remember looking for TV sets and was at Costco or The Price Club and thought I had found a great deal on a Widescreen Samsung TV. I held off because the model number had a single different character in the middle. I checked the Samsung website and this model was not to be found in their catalog. I Googled it and found out that it was a box-store special and that it didn't have the picture-in-picture tuner that the model I wanted had. I would've never known without scanning the list of all the features. You can tell me "caveat emptor" until you are blue in the face, but to me it is a clear case of bait-and-switch by the box store. I agree that a rifle stock is a more obvious thing to notice, but it would not shock me if an unscrupulous gun seller listed the gun BCEagle bought knowing that someone could easily confuse it for the model with the better stock. Legal? Yes. Shady business practice? Yes too, in my opinion. Please note that the above is not meant to impugn the Bullet Hole in any way. I don't have any experience with them, good or bad. I am just trying to counter those who lay all the responsibility at the feet of the buyer. I think some portion belongs to a responsible seller too.
-
Who do I get mad at Remington, Bullet Hole or myself?
If you have had good dealings with him before, I would err on the side of the dealer though. It is rare for a brick and mortar shop to be able to have as good a price on a gun as you see on the internet. It's possible that your retailer may have had this in mind when he put it up for sale, a la bait-and-switch. If so, it is a shady tactic, to say the least. Treat this as a not-that-painful learning experience. As for the stock, use this as an opportunity. If you had the Hogue stock, odds are that you might be upgrading it at some point anyway once the accuracy bug really bit you hard. For now you have an acceptable shooter that you can use while saving up for the McMillan or HS-Precision stock that you will eventually want anyway.
-
I think I want a Desert Eagle...
Just in case the gold coating wasn't enough... tiger stripe camo. Words escape me...
-
Gun shops...who measure up to the late Ray's Sport Shop
Ahhh. That's not much better than the way I imagined it.
-
Gun shops...who measure up to the late Ray's Sport Shop
Sorry if I worded my response offensively and/or didn't explain myself well. It wasn't my intention. I meant to say that it is not effective to display guns in such a way as to prevent the viewer from identifying it (i.e. using a single dowel for all the guns to create the "books on a bookshelf" look). The only way it would make sense is if purchasers were only interested in seeing the rear profile of the gun (almost never the case I imagine). The individual dowel method (one per pistol) allows a more three dimensional view of the gun, but of course does not allow as many guns to be displayed in a case. There may be other methods of display that give as good a picture and take up less real estate. I just don't know of any.
-
Gun shops...who measure up to the late Ray's Sport Shop
Most don't even bother with the dowel which I think is a better way to display the items. Not when the dowels are oriented at 90 degrees to front of the case and the firearms are all vertical - think of books on a bookshelf, that's how they are packed in there. That is asinine. It would only make sense if customers selected their handguns solely by girth. Place the dowel through the trigger guard and lay the gun on its side. Rotate it so at's at a slight angle to the front of the case, and you can fit a hell of a lot of guns in a case and still identify what they are.
-
Gun shops...who measure up to the late Ray's Sport Shop
And apathetic/sarcastic d-bags working behind the gun counter at Rays. I know that they must have gotten tired of being muzzle swept by customers, but they were really awful. I put them in the same class as the Sayreville Sportsman. I would look over a gun there to get the feel of it, but would never buy anything there.
-
Chad in the hospital
Hey Chad, We have emoticons just for you. :obscene-tolietcrapper: :obscene-tolietpush: :obscene-tolietclaw:
-
Undecided on revolvers
I fired a Lew Horton S&W 44mag snubbie. It is a handful, and it emits a 4 foot flame from the front. Even if the bullet misses your assailant, he might burst into flames.
-
Undecided on revolvers
That is true (although I am only talking about revolver locks). But I have yet to see a documented case (or even complaint on the Net) of a Ruger lock or Taurus lock self-activating. Ignoring the political aspect of putting locks on guns, the fact is that S&W's revolver lock is a bad design. The lock "flag" that sits in a parallel groove with the hammer and pops up when the gun is locked, is directly in line with the guns recoil forces. This allows the flag to pop up at inopportune times, effectively preventing the hammer from moving and jamming the gun. It is especially pronounced in light guns in hotter calibers like 357mag and up where recoil is stronger and not offset by a heavy frame. The Taurus revolver lock is in the hammer. The Ruger revolver lock is in the grip frame (you actually need to take off grip panels to activate it). These are much better designs than the S&W. I think a lot of the lock nay-sayers would come around to S&W if they came up with a better design.
-
Undecided on revolvers
I may be alone on this one, but I think new S&W revolvers are crap (especially when compared to old S&W revolvers). Unless you spend the money to buy something higher end from the Performance Center, the guns are nothing special. I have owned seven or eight S&W revolvers since I first started collecting. The only one I have left in my collection is a late 60's Model 28-2 Highway Patrolman. There is no comparison in quality between the older guns(i.e. pre 90's) and the newer*. I am not a gun snob at all either (I own a Glock and a Ruger). These days, if I were buying new, I would take any Ruger over a Smith in a heartbeat. I wouldn't buy new though. You can find a nice condition pre-lock Model 686, Model 19, Model 28 on GunBroker for a decent price. Lastly, if you are a second amendment advocate, S&W bent over for the Clinton administration and put gun locks on all their revolvers (look up "Hillary Hole" in Google). The fact that the lock remains today even after new ownership bought the company is a big bone of contention among those who see S&W's actions as a retreat to anti-gunners. As for personal experience, I have had a lock on a new S&W 629 (44mag) activate on me in the middle of a range session. I needed the range officer/gunsmith at Shore Shot to help me get it working again. You may think it's no big deal for a range toy, and you're right. But what about the guy who carries a S&W pistol for self-defense? * - Perfomance Center guns not included in this rant, although even these have the infernal lock.
-
Chad in the hospital
Maybe Chad just ran into this guy. http://www.youtube.com/watch?v=UD-dBpumWHw Or maybe he was just hanging with these guys
-
Hi!
I am going to assume your question is legitimate... Sorry, but only a lawyer is going to be able to answer your question. I don't believe that seeing a psychiatrist and taking an anti-depressant automatically disqualifies you for anything, but it probably does increase your need to provide documentation from a medical doctor and mental health professional that you are capable of responsible firearm ownership. Considering the open hostility of the AMA and the Mental Health profession towards legal gun ownership, you may have a difficult time. Good luck.
-
Chad in the hospital
Feel better man.
-
Any H&K USP Compact Shooters?
I like the USP compact, but I prefer the P2000. The USP, even the compact, is chunky and blocky. I think it's a ton more ergonomic and definitely more carry friendly too. The P2000 subcompact is even more so. I had a P2000 with the LEM trigger in 40 and loved it. It definitely soaked up the recoil really well.
-
Glock Bite
Matt, Perhaps you can get one made in pink. http://www.gunbroker.com/Auction/ViewIt ... =160795778 Man do these look atrocious. How about making them in non fluorescent colors.
-
Glock Bite
There is always the Glock beavertail treatment. Robar does it. Brownells has a DIY guide if you are mechanically inclined. http://www.robarguns.com/glock.htm http://www.brownells.com/.aspx/lid=1256 ... avertails#