Everything posted by lunker
-
My New M1 Garand - Courtesy of the CMP
Yes. I just went to my Bank of America branch and they did it for free. You can just bring in the single form that says Civilian Marksmanship Program. There isn't a big picture or bold print saying you're signing to get a gun because they shave notarized the form. Before I got the forms I was wondering if a notary would be hesitant to sign a form saying that I'll be getting a rifle.
-
BUIS (Backup Iron Sights) Recommendations
while the yankee hill sights are nice, troy DOES make a gas block version: http://store.troyind.com/Gas_Block_Front_BattleSight_p/ssig-gbf-00bt-00.htm Thanks. Looks like Rock River customer service made a mistake. I don't thinkm I'll be disappointed with the Yankee Hill Machine ones though.
-
BUIS (Backup Iron Sights) Recommendations
I got off the phone with Rock River tech support. The receiver rail is not exactly in line with the gas block rail. That is why I need a gas block mount. If they were, then I could use a rail mounted one. Unfortunately, Troy only makes rail mount sights. I went with a Yankee Hill Machine flip up front sight after reading a number of good reviews. http://www.midwayusa.com/viewProduct/?p ... ber=454763 As for the rear, I will use my spare carry handle until I can save a few shekels to pay for a rear flipup.
-
Dan Wesson Commander Bobtail in stock at Buds
Dan Wesson was taken over by CZ. I suspect Dan Wesson wasn't making ENOUGH for the beancounters at the CZ mothership. You have to be able to justify those acquisition costs.
-
Dan Wesson Commander Bobtail in stock at Buds
I agree with you. If you're going to spend 2k on a 1911, there are a lot of people who want the Ed Brown or Wilson Combat name on the side.
-
Difference between steel framed and alloy framed pistols
I am trying to decide between a compact 9mm with an all steel frame (CZ75B) and one with an alloy frame (CZ PCR). They both have all-steel slides. The difference in weight between the two guns is .3 lbs. The CZ 75B weighs 2 lbs. The CZ PCR weighs 1.7 lbs. How much (if at all) will this difference impact the felt recoil of the gun, the longevity of the gun, etc? I like the all-steel construction on the 75B, but I like the ambi-decocker I can get on the PCR. I never used the cocked-and-locked style safety on my 75B in 40S&W since I don't carry here in PRNJ. A decocker is handy from a sefety perspective because you don't have to pull the trigger and thumb down a hammer to decock. They are both time proven designs. :confusion-confused: :confusion-confused:
-
Dan Wesson Commander Bobtail in stock at Buds
Matt, The list price for the Valor V-Bob is a little over 2k. I hope you're right about being able to get it for $1400.
-
Dan Wesson Commander Bobtail in stock at Buds
I just got an e-mail notification. I'm sure it won't last long, especially since the model was discontinued and replaced with one that costs $600 more. http://www.budsgunshop.com/catalog/prod ... s_id/17999
-
Glock 20
I was just going off on the 10mm yesterday with Matt, trying to convince him to buy one. Below is a pasted together collection of what I wrote. To me 10mm is the most flexible autoloading cartridge extant. You can download it to 9mm target ammo levels. Or you can have 41 magnum power levels with autoloader capacity. You can load 200 grain hard cast bear stoppers or 135 grain hollow point people stoppers, and lots in between. Once you shoot a few DoubleTap 135grain screamers, you'll be hooked. If I ever have to get rid of all my handguns but one, I would choose a 10mm for these reasons. The only pain in the ass is separating the 10mm brass from 40S&W on the range floor, especially since brass gets chucked at least 10 feet with fun loads. I used to make really wimpy 10mm target loads where the ejected shell would land right at my feet. I also used to make loads where the pistol became a flamethrowing monster and the brass ejected 10 feet away (usually this brass had to be thrown away afterwards). The S&W 10XX models (unfortunately no longer made) are the strongest semi-auto guns I have ever seen. They are solid stainless steel bricks. The recoil spring on a 1006 is so strong, racking the slide is like trying to string Odysseus' bow. The Glock 20 was designed to handle the strongest 10mm Norma loads. The plastic grip soaks up the recoil really well. If you reload, and shoot somewhere that you can police your brass easily, 10mm is the king. You'll never go back. One last thing. Many conversion barrels (i.e. 9mm barrel for a 40S&W gun) have their reliability issues. This does not exist between the 10mm and 40S&W. Guns made for the two different calibers have the same sized breech face, so there are no feeding and extraction issues. The brass is the same diameter between 40S&W and 10mm. 10mm brass is 1/8" longer (think 38special --> 357mag). You can buy guns in both calibers and reload for both with the same die set. GO FOR IT!
-
My New M1 Garand - Courtesy of the CMP
Thanks. I sold that P7. I never liked the trigger on it as much as the P7M8 I owned before it (which I regret selling of course).
-
2-3-10 Fort dix?
Hmmm... That mat Maks is shooting on looks suspiciously like the one I lent him last week.
-
Gratuitous Dan Wesson Gun Porn
I used to make really wimpy 10mm target loads where the ejected shell would land right at my feet. I also used to make loads where the pistol became a flamethrowing monster and the brass ejected 10 feet away (usually this brass had to be thrown away afterwards). The S&W 10XX models (unfortunately no longer made) are the strongest semi-auto guns I have ever seen. They are solid stainless steel bricks. The recoil spring on a 1006 is so strong, racking the slide is like trying to string Odysseus' bow. The Glock 20 was designed to handle the strongest 10mm Norma loads. The plastic grip soaks up the recoil really well. If you reload, and shoot somewhere that you can police your brass easily, 10mm is the king. You'll never go back.
-
Gratuitous Dan Wesson Gun Porn
The brass is the same diameter between 40S&W and 10mm. 10mm brass is 1/8" longer (think 38special --> 357mag). You can buy guns in both calibers and reload for both with the same die set.
-
Gratuitous Dan Wesson Gun Porn
The 10mm Koolaid drinkers (I am still one) hate that there will be one less gunmaker out there for them. They are a devoted bunch. Through their efforts, Colt reintroduced their Delta Elite. S&W reintroduced their 410 revolver (which also shoots 40S&W). They even got VLTOR to bring back a new version of the famous Bren Ten (Sonny Crockett's pistol in Miami Vice). Glock and Kimber round out the list of major 10mm pistol makers (unless I am forgetting someone). To me 10mm is the most flexible autoloading cartridge extant. You can download it to 9mm target ammo levels. Or you can have 41 magnum power levels with autoloader capacity. You can load 200 grain hard cast bear stoppers or 135 grain hollow point people stoppers, and lots in between. Once you shoot a few DoubleTap 135grain screamers, you'll be hooked. If I ever have to get rid of all my handguns but one, I would choose a 10mm for these reasons. The only bitch is separating the 10mm brass from 40S&W on the range floor, especially since brass gets chucked at least 10 feet with fun loads.
-
Gratuitous Dan Wesson Gun Porn
Dan Wesson has done some strange moves in my opnion. They discontinued all 10mm guns. Maybe the guns were getting too battered by the mighty 10mm (my all time favorite handgun round). The new matte stainless Valor V-Bob is a lot more expensive than the bright stainless CBOB I have. As for my gun. It shoots very consistently for me (especially with the chicken**** 45 loads I brew up at home). Unfortunately, it's consistently a little to the right. I have to figure out whether it's me using not enought trigger finger (I'm a lefty), or if I just need to drift the rear sights a little. The other thing that's nice about the CBOB is the weight. I always thought full length 1911's felt a little noseheavy but that the length was needed for the recoil. Stainless weighs enough that the shorter commander length gun absorbs recoil really well. Matt, if you make it to BA one of these times again I'll let you shoot it.
-
Gratuitous Dan Wesson Gun Porn
My only disappointment was with the Trijicon sights. I think the Meprolights on my Glock are much brighter. Check out the slide to frame fit. Tight! You can see it already needs another cleaning.
-
Gratuitous Dan Wesson Gun Porn
Matt wanted pics of my new Dan Wesson Bobtail Commander, so here they are...
-
BUIS (Backup Iron Sights) Recommendations
It doesn't specifically, but... From having looked at a lot of these lately, it seems like the default type is the kind that mounts on a handguard top rail. The ones that mount on a gas block rail all seem to make special note of it in theor description. I am also guessing that because of the relatively low height of the sight. Front rail mounted sights are not as tall as those that are mounted on gas block sights.
-
BUIS (Backup Iron Sights) Recommendations
Those are nice. I don't think I can use the front sight though. It is meant to be mounted on a handguard rail. I need one that mounts on a gas block rail.
-
My New M1 Garand - Courtesy of the CMP
I have been hearing different stories about ammo for this gun. Will modern 30 '06 ammo damage the Operating rod? Do I need to shoot the surplus stuff?
-
My New M1 Garand - Courtesy of the CMP
It's already here, with a hundred fifty rounds down the pipe so far. And it's still shiny stainless, the way you like it.
-
My New M1 Garand - Courtesy of the CMP
one more
-
My New M1 Garand - Courtesy of the CMP
It's a Springfield Armory Service Grade. Here are some more pics. As you can see, it's going to take a lot of cleaning.
-
My New M1 Garand - Courtesy of the CMP
It is dark, but I wonder if I should do the same thing to it as I did with my Mosin. That is, use three cans of non-chlorinated brake cleaner to get all the nasty varnish and preservative (I guess Uncle Sam has its own version of cosmoline) off of it. It worked wonders with the Mosin. Turned it about six shades lighter.
-
My New M1 Garand - Courtesy of the CMP
Now you know why it looks like I'm having a fire sale on this forum.