Everything posted by lunker
-
17 HMR vs 17 HM2
Does anyone have a rifle in either of these calibers? I sold my Winchester Buolt Action 22LR and am interested in picking up a rimfire rifle in a zippier caliber than 22LR. I already have a Spike's AR-22 and a Ruger 10/22. I am thinking about 17HM2. Unfortunately a lot of gun makers are discontinuing rifles in this caliber (i.e. CZ just did, Marlin did last year). It has nearly the same trajectory as the (more than twice as expensive) 17 HMR up to 150 yards, although it is a few hundred fps slower. The 17HMR has a really flat trjectory out much further than the HM2, but I can't see it being useful. Any wind will throw a tiny light bullet like that way off course at distances like that. I could go with a rifle in 17HMR and know that it is a popular enough caliber that it is not going away. On the other hand, it costs about the same as 9mm. That just feels too expensive for rimfire ammo. The HM2 ammo is half as expensive. I am leaning towards a CZ in HM2. I looked at the ballistics for 22Mag, a venerable catridge that has withstood the test of time (since the 50's I believe), and it packs more of a punch than 22LR but it lacks either of the 17's accuracy and seems like more of a varmint round than a paper puncher. I also checked out the high end 22LR ammo and it too doesn't hold a candle to the 17's, and is actually around the same price.
-
Never mind unless you're Law Enforcement
Yes. I bought mags for a Glock a owned at the time. They did not require any LE credentials for that. I believe I also bought some 223 or 9mm ammo from them when they had a special.
-
Glocks...do you like / dislike...what would you change???
I almost always bring my Glock 34 to BA on Tuesdays. Any forum member that shows up on Tuesday is welcome to give it a try. You'll be drinking the Glock koolaid in no time. :character-koolaid: :character-koolaid: :character-koolaid: BBK, you are right about the 40 in a small Glock. I got rid of my 19 because I thought it was a bit snappy. It's a light gun for 40. My favorites are the Glock 9mm pistols: 17, 19, 34, and even the 26.
-
Glocks...do you like / dislike...what would you change???
I have owned several Glocks. The large frame models are too big for me to feel like I have a good grip on. I have owned and sold a Glock 21SF (45ACP) and a 20SF (10mm). I should have learned my lesson. On the other hand, I own a Glock 34 in 9mm. To me, this is the frame size where the Glock shines. It points really well for me and is surprisingly accurate. I am a better shot with it than with my S&W Model 28 revolver. I would never have expected that. As for the grip angle, I liken it to the Ruger 22 pistols or even a Luger. It just takes a little getting used to.
-
Merry Christmas to me
Hey Ray, I was checking out the properties of Duracoat and I'm thinking I would like something with a little more lubricity. Take a look at these Rogard http://www.robarguns.com/roguard.htm Black Stainless http://www.robarguns.com/additional_finishes.htm There are some other finishes I am looking at too. I'm not a tactical guy, but I don't really dig shiny stuff either. Somewhere I'll find a coating that suits me.
-
Lawmans in Paterson NJ
Lawmen's Supply main store is in Egg Harbor in South (what a North Jersey boy considers to be South anyway) Jersey. You might want to make the trip. It does stink if the one in Paterson is closed. That's where I got my Glock 34 through the GSSF discount.
-
M1A and M14
I believe the M1A is just the civilian semi-auto version of the M14. It is definitely Jersey legal. There is an Attorney General directive posted on the NJ State police website specifically about it (and the Colt Match Target rifle). http://www.state.nj.us/njsp/about/fire_ag1.html
-
Happy Birthday to....
Yup. I'm always checking the dipstick on my Depends underwear (just turned 40 in July).
-
BA 12/15/09.
I am stuck at work in the city. If I can get home at a reasonable time, I will be there. I will definitely have the Ruger PC-9 and Glock 34. After that, it's whatever I grab from the safe.
-
Merry Christmas to me
Thanks Matt. I'll check him out.
-
The Next Python?
They are tempting, but I'm a shooter more than a collector. The action on those Colts is so precision handfitted that not many gunsmiths know how to work on them any more when you shoot the gun loose. From what I have read, you pretty much have to stick with firing 38 specials in Pythons just to avoid that (kind of like the S&W K frame revolvers). That's why I love my S&W 28-2 Highway Patrolman. There's no doubt that it's a rougher-around-the-edges gun than the Python, but I will never shoot it loose and every decent gunsmith knows how to work on a S&W action. I get to shoot my friend's wife's Python once in a while, so I am not completely deprived.
-
The Next Python?
If that 3" Python was Royal Blue and in decent shape, $850 is a nice price. Short barreled Pythons go for a real premium. 6" blued Pythons routinely go for 1k.
-
The Next Python?
The Cult of the P7: HK P7 variants P7PSP P7M8 P7M10 P7M13
-
Merry Christmas to me
Fords does good work from what I have heard on HKPro, but I am looking for a protective black coating. Robar does black stainless and something called Roguard. http://www.robarguns.com/additional_finishes.htm http://www.robarguns.com/roguard.htm Birdsong does a nice finish too, but they get way backed up with government contracts from what I understand.
-
PayPal for guns = GUNPAL
Just signed up. Screw the anti-gun douchebags at PayPal.
-
Merry Christmas to me
I checked it out and it's the CCO. That's not a full size frame. It's a commander length slide on an officer frame. It's really nice looking, but I wanted more of a range toy. Somehow the Commander length 1911 just seems right to me.
-
Merry Christmas to me
Wow. That's news to me. All I saw on the website (and in person) is the stainless model. The blued version must be really new!.
-
Merry Christmas to me
I like the weight of stainless but not the look. I had a Springfield Loaded in 9mm that was stainless. It seemed like I needed to keep it more lubricated than any other gun I have ever owned to keep it running decently ( Stainless is known for galling). All of the Commander length 1911's I really liked (S&W and Colt) were aluminum frames. It is probably nice and light for carrying, but that's not really an issue in the People's Republik of Jersey. There was a non-aluminum framed Colt I really liked too, but the GI sights on the 1991 Commander are pretty lame. The slide would need machining to accept better ones, so the Dan Wesson it was.
-
Merry Christmas to me
+ $30 for shipping. By the way, I really don't like stainless guns. A nice Robar black finish is probably in its future. I got this because of the quality components and rave reviews. I had a hell of a time finding a new one for less than $1200. Used ones are going for 1K. I will give a range report as soon as I get to shoot it. It will be a Shore Shot safe queen until my Middletown PTP paperwork comes through. Hopefully that is sometime this week. With the new $18 background check they do each time now, I don't know how the permit wait time has been affected.
-
Merry Christmas to me
After exhaustive internet searches, I found a Dan Wesson CBOB at a reasonable price ($1055). It's on it's way. I'll be loading up some 45acp for next Tuesday at Brick Armory
-
H&K P7 Hunt.
Call Shore Shot Pistol Range. I sometimes see P7 PSP's in their gun case. I have never seen the P7M8 or P7M13 there though. They are much rarer and expensive. Those you will need to hit up GunBroker.com or GunsAmerica.com. Awesome gun by the way. I have owned all three models above. The P7M8 was my favorite. The P7M13 was a bit wide for my dainty, girlish hands.
-
Midway sale for you beginning reloaders
Midway is running some specials. The ABCs of Reloading is an Excellent book for beginners. It's on ale. Also, there is a Franklin electronic scale that is on sale. http://www.midwayusa.com/Promotion/?pro ... 1208200916
-
Mounting a Red Dot scope on an AR
I talked to the guys at Brownells. I am getting a 3/4" riser from them. Thanks for the help guys.
-
Mounting a Red Dot scope on an AR
I have a Colt Match Target with removable carrying handle. I bought a Tasco red dot scope that I'd like to throw on it. The scope came with low mount rings. They are perfect for my 10/22, but are no good for the AR. I can't see anything because the front site is completely blocking my view. Clearly I need something to raise the scope. I don't want to get the bracket that mounts to a carrying handle. I think that would make it too high for me to be comfortable. What do people use? Thanks.
-
Good Deal on S&W M&P 15
http://www.pistolandpawn.com/store/inde ... 7c301e39f5