Everything posted by BMWR12
-
M1 Garand Headspace
I do not have a field gauge. There is a decent sized gap with the NO Go gauge in, it is hard to see from the angle in the pic. The cmp says the bolt should not be able to rotate fully into battery and there should be a gap beneath the right lug of at least the thickness of a couple of business cards. The gap on mine is less than the one the CMP has pictured though. I guess it would't hurt to buythe field gauge.
-
M1 Garand Headspace
Does this look good? Thanks Pic 1 is with Go gauge Pic 2 with NO Go gauge
-
M1 Garand Headspace
I will give it a try next week. I also have to install a type 2 lockbar sight that is not here yet.
-
M1 Garand Headspace
My rifle works good the way it is now but I want to change out the bolt to the correct maker/date. I have the bolt dissassembled and have a set of headspace gauges. Is it a straight forward as the link says or are there problems I can run into.?http://www.odcmp.org/0309/default.asp?page=M1HEADSPACE
-
How practicle is this new mossberg add-on
Your probably better off getting a KSG or UTS 15 if you want really high capacity.
-
WW2 US semi auto riot shotguns
Thanks
-
Friday morning 12am. Ammoman.
A good website removes the items in cart from available inventory for 24hours even if the sale is not finalized. The ammoman website clearly is not set up for more than a few shoppers at a time.
-
WW2 US semi auto riot shotguns
Anybody have one? I recently picked up a WW2 Savage 720 Military with a 20" barrel. The wood normally is cracked on almost all of the Browning A5 copies I have seen.Any ideas on how to protect the handguard and stock from cracking if I want to fire it? I was told to leave the mag tube nut snug but not very tight to prevent the handguard from cracking.
-
Friday morning 12am. Ammoman.
Complete BS had in cart and then magically sold out
-
Friday morning 12am. Ammoman.
probably an site upload issue
-
Can I ask a ridiculous question?
You can build a early type M16 in semi auto but it must comply with the NJ AWB laws. There is at least 1 company that makes retro lowers. The upper can be a AWB compliant SP1 or M16. It will probably cost roughly $800-1000 to do this.
-
AmmoMan.com
I have heard that story but not sure who it was. I personally would not buy any gun advertised as a Vietnam bringback that did not have at least one of the 3 forms that would have the weapons serial number on it.
-
AmmoMan.com
The phone number on the site is a NJ based number. The mailing address is for a PO box in Newark? I am betting he is still in NJ. Maybe he he opened up a second location outside of NJ?
-
m1 carbine in 9mm for $346!
I am kind of suprised that there has never been any real challange in court of the M1 carbine. I would have figured it would have gotten the colt match target or M1a treatment by now.
-
m1 carbine in 9mm for $346!
Original m1 carbines as well as most commercial made versions do not say M1 carbine either. The AO carbine used non interchange internal parts and was not marked M1 carbine and is still not ok forsale.
-
So who pre-ordered one of the new gaming consoles? What did you get?
PS4
-
mg42
You would be better off buying a Wiselite or BRP semi then trying to build one yourself from a rewelded by a FFL 07 or a new 100% reciever. All of the kits I have seen have no more than 2 parts with the same numbers.
-
The Best Overall Home Defense Pump Shotgun?
I would prefer either the Mossberg 500 factory Bullpup but the 870 Police with old school Remington top folding stock is a close second. The Bullpup is just above the legal OAL and is well balanced. It is very maneuverable, has lower recoil than a regular 500, and has 2 pistol grips. The 870 Police is a very good shotgun and the addition of the original top folding stock makes it pretty maneuverable and easy to control. It can also accept 2 and 3 shot extensions also.
-
Rare gun
IMO,There are not a lot of rare guns but there are a lot of hard to find and uncommon ones. Most of the hard to find and uncommon guns are pre 1900 or pre 1946 military guns in untouched condition. When it comes to WW2 foreign guns, some are very hard to find because they had to be bringback weapons because they never were imported. So these items can be hard to find in collectible condition.
-
pre ban rifle
If it is marked AR15 on the receiver it is illegal.
-
Gun buy back announced for Monmouth Co.
The Luger looks like a Russian Rework but still worth $600 or more. The Mossberg 500 Bullpup is certainly legal in NJ, they usually go for $600-$800+ in good shape.They are pretty cool to shoot and the recoil is not bad at all for a 28.5" shotgun.
-
Mosin M38 or M44?
Your probably not going to find a M38 at a store front in NJ. The M38 and M44 are more desireable if it has a discreet import mark and stamped matching numbers. The M38 is hard to find and to find one with the m38 stock is even harder.Pretty much all of the later ones have a m44 stock.
-
Aviation Fuel in my car
I run it my pre 1945 Motorcycles. I would not run it in anything modern except a plane. It is high octane and leaded of course.
-
M44
The import markings are also a big factor on the price of the m44s and the m38s. If it is not billboard marked on the reciever it worth much more. I paid $300 for mint matching numbers 1944 with a small import mark under the barrel and $400 for a m38 in almost the better condition. At the time similar rifles sold on GB for close to $1000. I remember when these rifles were $79.99-89.99 and the 91s were $59.99 each
-
Beware of Cabela's Ammo - Herter's 7.62x39 is Corrosive
I have used there .223 and .308 and never had problems with it. I find it hard to believe the 7.62x39 is using a corrosive primer or powder.