Everything posted by Cylinder Head
-
Sig vs HK
Sig's QC for their civilian guns has gone way downhill. It make take a trip to the factory or two to get your gun sorted. If you're looking at an HK in 9mm, try the P30.
-
9 mm or .40 cal - - Why Get One Over The Other?
I've read most of the threads in the Terminal Ballistics section of Doc Roberts' little corner of M4C. He doesn't mention which bullets and loads are used for that picture. Double Tap loads have been tested repeatedly, they live up to the manufacturer claims.
-
9 mm or .40 cal - - Why Get One Over The Other?
Vlad, There are way too many unknowns with regards to your picture. What are the bullets being tested? What are the loads and who manufactured them? For my defensive rounds I use a 230gr DoubleTap .45 which comes in at: 1010fps/ 521 ft./lbs. - 5" 1911. That's a huge improvement on whatever round was tested in that pic. Old Glock Guy, to answer your question: no it was not a good thing that the BG recovered. They weren't shooting him to get him to comply with their wishes, they were shooting him to kill him. You do not shoot anyone with any other desired effect.
-
9 mm or .40 cal - - Why Get One Over The Other?
I don't like the .40 round, but not because it is "too snappy". I'm not a USPSA ninja, I don't run around an IDPA course (yet). I just think it's a bad compromise round. I understand that it has certain benefits for competition shooters (class and reloading) but those benefits evaporate when you hear glass breaking at night. The two SWAT team leaders who taught my last Carbine course were discussing a shooting where the officers put 5 .40cal rounds into the suspect who made a full recovery. They have since switched to .45 cal Glock 21's. Someone can chime in here about shot placement and how handgun rounds in general are inferior, that's just fine because you'd be correct. Effectiveness of a round is dependent on a few things; placement, penetration and expansion. In general you want 12-18" of penetration and you always want maximum expansion. 9mm is great for penetration (sometimes overpenetration) but can only expand so much. 45cal is great for expansion and gets enough penetration in the right loads to be very effective (Double Tap makes EXCELLENT defensive loads). 40 is middle-of-the-road in a case where you do not want to be middle of the road.
-
Bravo Company Charging Handle
I run a Mod 4 and I absolutely love it. Worked excellent at a class last weekend when I had a tap-rack-bang situation that I managed to clear in a few seconds with my support hand. I keep a spare in my bag in case I bust this one.
-
Brady Bunch Releases New Ad
I'm going to PA this weekend (I'm about 30 yards away from the border at home). I'm going to buy 30 ASSAULT CLIPS and leave them with my friend who lives in PA.
-
Mythbusting - oiling your firearm
The wetter the better!!
-
www.imfdb.com best arsenal movies
Commando!!! All the way. "I've got to get my rifle from the shed."
-
guns and cases
I second the Pelican Case. They make some of the best cases on the market.
-
FNP 45 vs Beretta PX4 Storm .45
I agree with Ronhonda, the Cougar is a dog, and while I've heard some good and some bad about the Px4, it's basically a slightly re-designed Cougar. Beretta makes some great firearms, but I'm nowhere near sold on the Px4. Plus, rotating barrel assemblies just mean more parts that can fail. I would like to hear from Px4 owners who are over 5,000 rounds in their guns. The most common problem I've heard of is failure-to-feed.
-
Gun store trip
Best gun shop in the state with no assault rifles or pistols? Our definitions differ sir.
-
AR pics, lets see'um!
Unless you have an ambi lower.....
-
Internet Hype
Actually..... That really does happen. On older model M9's, as discussed in this thread, would blow up and the slide actually would take your teeth with it.
-
GunForHire Tactical Carbine 1
I would highly recommend it to those new to the platform. I've only had my rifle for 6 months, and in that time I have not had any training outside my own range sessions. This course will help you familiarize yourself with your weapon futher, and will REALLY help you understand your own shortcomings with regards to handling it. Everything taught was very practical, a beginner would have no problems. Originally there were supposed to be 6 students for the class. One dropped out so we were 5. Lots of personal attention from the instructors.
-
GunForHire Tactical Carbine 1
Awesome, thank you. I will be doing this later.
-
Internet Hype
Hey, my HK45 was a great first handgun!! 5.56mm is a weak round. .45acp will knock a man down.
-
Special K's AR build
Like others have said, save yourself some coin and buy a pre-built Upper at least. I for one will not be building my own AR's as long as companies like LMT, Noveske and KAC exist.
-
GunForHire Tactical Carbine 1
Just wanted to post up my experiences from this weekend's Tactical Carbine course run by GunForHire down in Winslow, NJ. The instructors were absolutely terrific, very knowledgeable regarding the AR and its history and extremely practical. They were also a ton of fun and disspelled some rumors about gun use in NJ (I will not comment further). They created a very relaxed atmosphere that was simultaneously VERY SAFE. I cannot stress this enough, GunForHire's courses, every one I have attended, are extremely safe. The day started with us students getting a rough 50-yard zero for our rifles. I went prone and used my magnifier to walk my rounds on to the bull. I wish we had used a full blown arrest to get a better zero but that would have taken way too much time. They were looking for 6-inch groups and I was able to make 3". At the end of the day I was crushing headshots on steel at 30 yards so I'd say it was a decent enough zero. We ran a number of drills designed to test how fast we could get our weapons up and on target. There were also a number of multi-target drills. The best thing about these drills is that you learn a lot about your equipment. Nothing is as good of an acid test for your rig and your rifle than run....shoot....reload...shoot....run...tactical reload.... oops I dropped my mag.... I was very happy with my Aimpoint and my Tactical Tailor MAV by the end of the day. At no point did my equipment get in the way, snag or feel like it was weighing me down. I was not quite up to snuff with my Blue Force Gear sling, I need to get better with when to tension it and when not to. This brings me to my next point. PMAGS do not like sand. Pinned ones specifically, will get gummed up and there's basically no way for you to clean them as they are pinned closed. I had two of my mags get SO TIGHT I could barely get the 15th round in them. They would absolutely not load into the weapon on a closed bolt, and still will not. This caused a few problems for me until I figured it out and only loaded those mags with the bolt fully locked back. Other than that, and the occasional user error, my KAC ran perfectly the entire day. When I was accurate, the gun was as well. We ended the class with some of the more fun drills. One drill in particular had us running on command, 5 steps in one direction, and then another, stopping to deliver 4 rounds on target, then repeat. I was picked on for this as I had 5 mags on my rig and 1 on my rifle, so I ran this drill alone after everyone else was dry. My heart rate was somewhere between a scared jackrabbit and a hummingbird by the time I was done. Can't wait to take Carbine 2, I missed it yesterday as I am on the left coast for business.
-
Robar np3 Plus Treatment
- Robar np3 Plus Treatment
SWEET. My P7M8 was NP3'd and I LOVED that coating. Phenomenal for cleaning, you can wipe off the gun, barely any chemicals needed.- Thinking about leaving Ford and going to BMW
I've been a BMW guy for as long as I can remember. I've always been treated very well by BMW service (Paul Miller in Wayne has been phenomenal). Can't say much for the sales side as I've always had an "in", basically got my M5 at cost five years ago. They move a lot of cars, and they make some of the BEST cars. Many here have mentioned the lease programs, from what I understand those are also the most lucrative for the dealerships. Joe, I think that it would be a good move for you to get that exposure to the higher end cars, if that's what you've chosen as a career. It can't hurt, you're being nickel-and-dimed.- Eye Candy, Unsafe Gun Handling, Rough Sex
Tall ginger Russian who plays with guns? Where do I sign up?- Making FAL legal/ Pinning muzzle brake
After reading about Larry Vickers and his love for the FAL I am seriously considering getting myself one. Who makes them, PARA?? POF? I forget. Edit: DSA.- Pistols and Pot
Good for her standing up for her rights. If people could get medical methamphetamine permits I'd think maybe I wouldn't want them carrying guns, but medical marijuana?? What are they gonna do, hold up a Wendy's, ignore the money and steal all of the fries?- I just put some money down on a used HK P2000 .40!
Not to mention the lifetime HK warranty. You can always send it out and they'll fix it up for you. Their CS has been much improved. - Robar np3 Plus Treatment