Everything posted by Cylinder Head
-
Looking to get an AR, have a few ?s
And this is why Vlad and I prefer 16" guns over 14.5", especially if you're going to pin the gun to 16" anyway. I have half a case of Mk318 SOST at home, btw. Haven't even touched it yet.
-
Looking to get an AR, have a few ?s
Velocity is critically important when it comes to 5.56/.223 5.56, especially the cannelured rounds, are most effective when approaching 3,000fps due to their innate tendency to yaw and shatter. Less velocity = less effective range in which this tends to happen. Nowadays with most rifle twist rates around 1:7 to 1:9 the rounds fly straight, and often straight through their target. In Vietnam the issued M16's had 1:16 to 1:18 twist rate barrels, making the rounds rather unstable in their flight, and causing the rounds to basically shatter on impact. I forgot where I read the article but one soldier was quoted speaking about how hard it was to take wounded prisoners alive due to the horrendous wounds 5.56 would create.
-
Looking to get an AR, have a few ?s
Agree. I shoot a lot, I plan to run at least 3 courses this summer (already ran one) so my uses differ from others who just want to go to the range and back or grab their AR when something goes bump in the night.
-
Looking to get an AR, have a few ?s
We're going to have to agree to disagree here. There are a lot of shoddily assembled AR's out there from the factory: Superior Arms Sig Doesn't care about their gas ports. Bushmaster I just spent two minutes looking these up. I could go on. Bottom line is the reality differs from your opinions, no disrespect intended. You can call me a snob or gear queer, but before I spend my hard earned money I ask people who are experts in the field. In this case there are a lot of people on M4Carbine that either 1. Are active duty Mil/LEO 2. Compete Regularly 3. Teach Others how to shoot.
-
Looking to get an AR, have a few ?s
Unfortunately I do not. Most of what you'll see in NJ is DPMS or Bushmaster, hard to find a top-shelf AR that's stocked here, there just isn't the market for it. I'd gladly let you handle mine, I live in West/Central Jersey now on the PA border. Very light, near zero recoil (especially with a Battlecomp 1.0), features that would run you well over the MSRP if you added them to any gun and an EXCELLENT stock trigger and BUIS. If you handle one and like it, I'm sure Paul (PK90) can order you one and get it NJ legal.
-
Looking to get an AR, have a few ?s
This is completely incorrect. All AR's are not made the same. There are a ton of shitty companies out there assembling AR's out of rat feces in a shed. There are also those whose marketing campaigns are better than their components and customer service(Spikes, sorry guys, but it's the truth). Read this, it used to be the holy chart of all things AR related but RobS has taken it down to redo it. Regardless tehre is a lot of knowledge here: AR Components Explained Next follow these steps: Step 1: Go to M4Carbine.net Step 2: Read for the next month. Step 3: Buy a BCM, DDM4v5, LMT, COLT, Noveske or KAC (my fave) No offense to the posters here, but if you're looking to buy once, cry once, then there's no better place to learn than on M4carbine.net when it comes to AR's.
-
Osama Bin Laden dead?
There is some credible info out there on this. From what I've read it was a JSOC operation with DEVGRU and SAD in the drivers' seat. Not sure who secured the perimeter but SAD and DEVGRU did the door kicking. Soldier Systems is reporting that the weapon used to do OBL in was an HK416.
-
Osama Bin Laden dead?
I'd be willing to bet that the killshot came from a Mk18, which would be a 5.56. Either way it's conjecture, but the 9mm has fallen out of favor with the Go Fast CQB crowd with the proliferation of SBR's.
-
What ammo do you keep loaded for home defense.
I watch a lot of "48 hours" and "ID Channel" shows that recount instances of people being railroaded by an overzealous prosecution. 9 times out of 10 it is the people who unknowingly incriminate themselves by talking to the police without a lawyer present. Generally if you say anything other than "I defended myself against a threat" without your lawyer there you are just asking for trouble.
-
What ammo do you keep loaded for home defense.
This. I've had NJ LEO's tell me candidly that it does not matter what you shoot an intruder with. They also asked if I had ever heard of a homeowner in NJ being prosecuted for shooting an intruder, because they hadn't.
-
Solvent Smells
Hoppes Elite is barely detectable. I just picked up a ton at a store in PA.
-
AR Anatomy
Great guide by Vlad. He hit the nail on the head. Anyone looking for a tac light should check out Elzetta. Surefire has recently raised their prices from astronomical to outrageous and Elzetta is gaining a great reputation for quality and durability (I still use Surefires myself).
-
GunForHire Tactical Carbine 1
This was the first time I've shot steel so I can't tell you much else. The targets were brand new and the instructors tested them before anyone was on the line to make sure there was no backsplatter. Also note, this was a drill where we were standing behind cover. I did not state that before.
-
Kimber to Wilson like Nissan to infinity?
Look, this isn't my fight, I personally don't have a dog in it. I made a statement, backed it up, blew a gigantic hole in your "I looked at my gun and didn't see any MIM in it" argument, and then listed MIM parts failures per your request. Cost cutting by replacing forged parts with MIM parts has not been met with a lot of love in the gun community. Look up Ron Cohen. He's pretty much the source of much of this internet hate. I don't have anything against Kimbers and I don't give two craps about armchair internet commando's. I can tell you that I've fired a Kimber and a Wilson and the Wilson felt a thousand dollars better.
-
Kimber to Wilson like Nissan to infinity?
End of discussion right there. DevsAdvocate, I'm not trying to be a jerk but sometimes the truth can cause a lot of butthurt, especially on the errornet. I'm sure you love your Kimber Custom, but you are sorely mistaken about the number of MIM parts in it. Taken from a thread specifically relating to the Custom, here is the list: I'll take hand-fitted, forged parts over Metal-Injection-Molded any day. Have MIM Parts failed?? Taken from a thread where gunsmiths discuss MIM parts in 1911's (and the offending broken parts in a Kimber Custom were replaced with Wilson parts ).
-
West Orange Shooting
Having recently moved from that area, I do not really miss it. Terrible story.
-
Surefire hi capacity AR magazines
Weren't these developed for the IAR because BETA mags don't like combat conditions??
-
Kimber to Wilson like Nissan to infinity?
Have Fun Click the link and enjoy.
-
Kimber to Wilson like Nissan to infinity?
Having fired several 1911's including MIMbers and Wilsons, I'd say that Wilson 1911's are the TITS.
-
P Mag Question
Another huge +1 for Ty and MidwestPX. He stold me all of the accessories for my SR-15 and they got to me way before the rifle did. Excellent service and super speedy shipping.
-
Pure Sex
Welcome to the club. I've had mine for three years and over 6,000 rounds later it's never had a hiccup. I had Bill Springfield work his magic on the trigger and it improved the SA and DA pulls. SA is 1911-ish at this point (it's still plastic though). I'd also recommend Heinie Straight 8's. They made a big difference on my gun. Take it to a class, that is where it will really shine. I couldn't get mine to malf while the marine down the line couldn't get his M9 to fire more than two rounds at a time.
-
AR pics, lets see'um!
DevsAdvocate, nice stuff! I really need to find a nice quiet place in PA to shoot. Now that I'm on the Delaware I do not want to shoot in NJ anymore.
-
nutnfancy videos
I think the guy is a douche. At one point he endorsed ACU's. Nuff said.
-
Sig vs HK
It was the Navy, as in SEALs, and I am well aware of the fate of the "boat anchor". I always have a reference
-
Sig vs HK
These guys didn't Socom Adopted the HK45C as their new sidearm in 2010.