Everything posted by Malsua
-
generators
I've got a 4k generac but we're adding some rooms soon and I intend to get a whole house one, like a 15 or 20kw. I wonder how many generators showed up at the return desk this week. I suppose I wouldn't be as motivated to have a generator if I was on city water and had pressure during an outage. On a well, I've got nuttin.
-
ccw in pa
These rumors never seem to die. http://njgunforums.com/forum/index.php?/topic/26183-usefull-pa-ag-decision-on-ccw-with-a-nonres-permit/page__view__findpost__p__344854
-
Twist for RRA barrel???
In SHTF, you can shoot anything out of a 1:9. Accuracy will suffer on 72 or so grain or heavier bullet but it'll still kill. The bullet will start to tumble earlier that it would have otherwise. Most cheap ammo is 55gr so a 1:9 twist is fine.
-
Article: CCW for LEOE's
There is no retreat inside your home. You may stand at the threshold and prevent an assailant's entry by any means, this applies to anywhere inside your home. The castle doctrine is defined in the 2c statutes and has been affirmed in case law thereafter. Read my post here: http://njgunforums.com/forum/index.php?/topic/26145-scotus-to-decide-on-carry/page__view__findpost__p__350080
-
Greetings From Highland Lakes
Well, you don't have to be bashful . Many of the folks on here can vouch that I don't bite. I don't mind other people shooting my guns. I realize it can be intimidating the first time out to a range with a stranger, but it's one of the safest places in the world. Everyone is armed
-
Greetings From Highland Lakes
Yeah, it's nice up here, cept that Barret road, 94, maple grange got washed out, Breakneck has a new tunnel under it, seen here http://thewellrats.com/malbor2/irene/breakneck1.jpg and here http://thewellrats.com/malbor2/irene/breakneck.jpg Then we get the ever present 400lb eating machines all the time. I've got bars on my kitchen window after one attempted to get in. But yeah, in general, it's pretty nice up here.
-
Greetings From Highland Lakes
Hi, Welcome, neighbor . Your firearms purchaser ID will take roughly 90-100 days. The PD sits on them for 60 days and blames it on the FBI or at least that was my experience. It's been a few years, maybe you'll get lucky. My purchaser ID took 104 days. Subsequent pistol permits take about a month. Are you planning on joining Cherry Ridge? Without being specific, as this is an open forum, what part of the town are you in? I'm just off the main lake, west side. If you'd like to run down to CR and pop off some rounds, I'm available tomorrow morning.
-
Is cherry ridge open tomorrow, labor day?
Yes, it will be open.
-
Will Hurricane Katia Hit Us?
This one will get blown out to sea.
-
Camden Chief Issues P2P's to Prohibited Person
As some point, unless you're a career criminal or it was a heinous crime, your past shouldn't haunt you. I never have been in trouble with the law, but I certainly am not the same person I was in 1982. I did some awfully stupid things back then that I wouldn't even contemplate now.
-
Camden Chief Issues P2P's to Prohibited Person
In the councilman's defense, this was for welfare fraud in 1982. I personally don't think that a non violent crime committed 20+ years ago should prevent you from defending yourself. A repeated string of them, sure. A one off of which he's made restitution? I don't think for a second that this 55 year old is going to turn into a banger. As to the chief...is anyone surprised that a conviction from 29 years ago might not pop to the top of a search? I would bet it really was an accident rather than some kind of conspiracy to get a gun.
-
Anyone going to CR today?
I am home today but working on a landscaping project otherwise I'd do it. That said, you can go check out the facility if you'd like, no one will bother you. In fact, if you see a Range officer, stop and talk and mention that you wanted to join. You can't go up on the firing lines but you can walk around and look. Bring some ear plugs, specially at 50/100 rifle..it can be loud.
-
Holsters
Looks like a hit-and-run poster.
-
Targets at the Silhouette range at CR
That's fine. You can rig it anyway you'd like. When I spoke of a 10 dollar spinner, that particular piece of crap was what I had in mind. I have one and I've seen others try it. It sucks donkey balls. It falls over.
-
Moving to NJ from out of state
That is correct. There is no mandatory registration of firearms. There is an assault weapons ban in effect. Semi-autos have a mag limit of 15 Semi-auto shotguns have a mag limit of 6 ARs type rifles have to play the evil feature games with pinned stocks, pin/welded muzzle brakes, no Bayonet, etc. Some firearms are banned by name such as an AK 47 or AR-15. If you've not completed your move yet, go buy something in Ohio before you leave. In fact, since handguns can transfer person to person, if you're still a resident of Ohio(I.E. still holding an Ohio DL license), you can buy guns from your friends or visit a gun show and get whatever you'd like before you finalize your move. All the guns that you purchased prior to the finalization of your move are your property and can be legally owned in NJ if they do not violate the assault statutes. As a note, there is no grandfathering of assault weapons. They are banned. If you have any that fit the description, DO NOT bring them to NJ under any circumstance. Leave them back in Ohio.
-
Moving to NJ from out of state
Welcome. Bring your guns. What part of Ohio? I grew up there and enjoyed the lack of gun control.
-
Will CR be doing memberships this Sunday?
Per Anthony, it will be on Sunday. http://njgunforums.com/forum/index.php?/topic/26870-cherry-ridge/page__view__findpost__p__353922
-
Targets at the Silhouette range at CR
There are some targets there. You are allowed to bring steel targets as long as the bullets will end up in the backstop or traps. No glass, fruit, whatever else. The range is informal so if someone else is shooting, ask for a ceasefire and take your target out. I take my reset target when I go. Those $10 spinners will fall over so don't bother with those.
-
Sig P226, P229 for a lefty?
One of the main reasons I have an HK P30 is that it is ambidextrous. I have other guns that are not and I can shoot them just fine but for HD, I wouldn't have a non-ambi gun. My HK has never had a malfunction and I wouldn't hesitate to buy another HK. I think I want to get an HK 45 but I'm in house improvement mode so it will wait. I almost bought a p226 but when I felt the HKp30, I had to have it. It's just a great gun but of course, it's expensive for a pistol.
- Howdy from Pequannock
-
Irene....how did u guys hold up??
You do realize you just need to use a bucket and pour straight into the bowl? You don't have to fill the tank.
-
Irene....how did u guys hold up??
Just for what it's worth, you should change the oil in your generator after 24 hours of use. If it has an external, changeable filter you can typically double the time. If you run synthetic, you can double it again. Those little motors break the oil down very quickly.
-
Cherry Ridge
23 to 287 is fine. Canistear is fine. North on 287 is a problem, so Green Pond on the way up.
-
Dealing with Insurance adjusters
+1 A friend of mine's brother does this, he always gets way more than the insurance company will offer. In fact, his agreement is that if he can't get you more, he doesn't charge anything. It's mostly about detailing everything. As a general rule, the insurance company will try to low ball you out of the gate. If they catch a whiff of desperation, they've got ya. You have to be willing to live with the problem until you get a fair settlement.
-
Montvale man fires shots into transformer
Since at least 1999, ANYTHING that has PCBs in it must be registered. Every transformer or other electrical device that has them has to have an end of life plan. The number of transformers with PCBs is nothing like it was back in the 70s and earlier. The town I grew up in was the site of one of the first superfund sites...plugged up with barrels PCBs from Monsanto and the smattering of cadmium, chromium, you know, all that good stuff. The site is called Summit National, otherwise known to us locals as "The Deerfield Dump". http://www.epa.gov/superfund/sites/query/queryhtm/nplfin.htm#OH I remember backing the truck up at that place in the 70s and shoving a bunch of junk into the ravine and seeing barrels all over. Consequently, PCBs have always been near and dear to my heart