Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Malsua

Members
  • Joined

  • Last visited

Everything posted by Malsua

  1. .I'm unclear how runty 5'6" Tom Cruise got the role of a 6'5" brute. Also, Jack Reacher doesn't drive. 30 seconds into the first movie, he's tooling down the highway. Ah well, I guess the first one was fun for what it was.
  2. I have several rifles I am looking to unload and I seriously wasn't going to sell them if Hillary Rotten Criminal had won.
  3. I know what you meant. The problem is that people who fall out of favor around the Clintons tend to come to a nasty brutish end.
  4. Bang might be right. I suspect that when mommy and daddy money dries up, the hedge fund is a distant memory and Mr. Chelsea is day trading to keep food on the table, "bang" might just happen. Specially if he's got a decent life insurance policy. "He was robbed one night after meeting his friends for drinks, no suspects"
  5. ...which he got from the Clinton Foundation. The seed money for the hedge fund came from there. I'm also going to guess that he's managing client funds of people looking to curry Clinton favor. That hedge fund is doomed. Count on it.
  6. Wanna bet her speaking fees drop to about 1k? The Clinton Foundation donations are also going to dry up. Chelsea may have to sell her 10 million dollar apartment.
  7. The concept for the room is "beach, sand and water" Hence the vanity looks like water over stones. Shrug. If anyone ever wants to do this type of application, I have some definite "tips" for you. 1. Mechanically mix the epoxy. Use a low volume, high viscosity mixing blade on medium speed. Do not lift it to the surface and introduce a bunch of air. 2. Room, epoxy and substrate must be warm, 75+ 3. We used both Klear Kote and Kleer Kote. Competing mfgs. Klear Kote smells horrendous. Kleer Kote has almost zero smell. 4. Expect to trash your buckets, measuring cups and gloves. Once it's on something, you aren't getting it off. I was able to clean my mixer with denatured alcohol and a lot of work, the measuring cups were a loss. Oh and use measuring cups..."eyeballing it" isn't good enough. 4a Use two buckets to mix each batch. Mix first in one bucket for 3 minutes, then pour contents into second buck, mix for 3 minutes. Use stir stick to "roll it over, top to bottom a few times. 4b toss buckets after each coat. We used 8 buckets for this counter top. We had 2 liners, but the store was out, so I just used the buckets themselves. 5. Don't mix a batch of more than 1gallon at a time(2qt epoxy, 2qt hardener). In fact, don't do more than 3qt at a time if you can help it. 6. Use a propane torch to pop bubbles 20 minutes after a pour. You put it on low and lightly play it across the surface, the bubbles come up and pop. 7. Don't touch it to test...you leave fingerprints in it. Should be reasonably hard by 8 hours, and mostly cured in 3 days.
  8. We remodeled our house in 2012, doubling the floor space and tripling the volume. I know...TL:DR The LAST item was the vanity in the upstairs master suite. We had a crappy little vanity from the old bathroom in there until a few weeks ago. We ordered some decent Thomasville cabinets from Home Depot for one reason, they had a 25% off labor day special. We were going to custom build them(I worked in a Cabinet shop 22 years ago, I can do it) but after all this time I'm ready to be done. We had also contacted a local cabinet builder but he never got back to us...his loss, we'd have probably spent a fortune with him. Anyway, my wife wanted to do a special counter top, instead of an off the shelf Corian or something. Here's what we came up with. Well, it was her idea, mostly. I pick things up and put them down. Clear Acrylic Epoxy over tiles. like you see in Bars with pennies or whatnot in them. Two layers of plywood, one layer of backerboard, mastic, tile, grout. This took a solid weekend and it had to cure. Next comes the Acrylic...and it's a pain in the ass, but now I know. First you have to mix a "sealing" coat. You then pain it on your substrate and let it cure to a tack. Roughly four hours later you do a flood coat. Roughly four hours after that you do another flood coat. The problem is...mixing the Epoxy is critical. Our second flood coat never cured evenly, apparently I didn't mix it perfectly. It had some tacky spots. If you read some instructions on this epoxy NEVER MIX IT WITH A DRILL. Then you read what people who do this for a living say "We mix it with a drill" I didn't mix it with a drill and it was sticky. We ordered more epoxy...and I MIXED IT WITH A DRILL! It wasn't a paint mixer though, it was a low volume mixer blade for thick material, a paint mixer will not work properly. This coat is rock hard! We are going to trim up the edges with some solid maple. I think it looks great.
  9. Unloaded. Where you keep your ammo is up to you, as long as it's not in the firearm. Special care should be taken with hollow points as in, they should be treated the same way you treat handguns. Always within the exemptions. The other stuff can legally roll around in the floorboards.
  10. I've got somewhere north of 40 SSDs in my realm of control and I've had 1 issue. It was a 120gb samsung Evo and I don't know what happened but the boot sector got borked. I pulled the drive, chkdsk'd it in a different machine, it fixed a problem, then replaced back in the original machine and it rebooted. A day or two later, I cloned it onto an 850 Pro and sold the drive off on Ebay. I have several very high traffic rip stations and all those are Samsung Pro drives...most of which are m.2. I've not had any issue with those at all.
  11. What he said. Remove and replace the memory. If the problem still occurs, hopefully you have two or four chips, remove one, try it if it fails, then swap the installed chip with the removed chip, try it, rinse repeat. Your crashes sound more memory than hard drive, although it can be either.
  12. I would suggest you buy any handguns you expect to want RIGHT NOW while you are in FL. Use a credit card and pay it off when you get your tax return.
  13. Welcome. Have fun. Make sure your firearms are NJ compliant and you should probably apply for your Purchaser ID as soon as you are settled.
  14. Malsua replied to ryan_j's topic in NJ Prepared
    If anyone wants to "get in the game" so to speak, here's a fairly inexpensive route. It's a pretty decent radio for what it is at 8 Watts. Make an offer for $45, it'll get accepted $44 won't. heh. http://www.ebay.com/itm/390980003153 Mouse over image to zoom Have one to sell? Sell now Details about Baofeng Black BF-F9 V2+ TRI-POWER 8 Watts Two Way Dual-Band HAM Radio VHF/UHF FM
  15. After looking at everyone's suggestions here and elsewhere...seems to me that Lutron is the most reliable. Now I just have to figure out what the hell I need. One of my outside lights is a single gang, one is on a 2 gang, one is on a 3 gang, so I need combo plates. I'm pretty sure I have neutrals everywhere, so I can use the cheaper switches and I need 3 of those. I'll need a hub and a remote, I think. heh. There's probably something I'm missing. Looks like all in, this will cost about 350 bucks. ouch. If Trump wins, maybe I can sell a gun.
  16. Don't own a dog if you have a clapper. It turns into disco night when someone comes to the door.
  17. Hmm...I don't mind having a hub. I saw that GE Z-Wave thing, but I didn't see a base station for it. Echo would be nice I suppose, but I can't really see using it much. I do have prime, but not sure I want a listening device in my house. I don't really want bulbs...I have awesome outdoor LED fixtures that are frickin amazing. I'll be happy just swapping out some switches. I'll have to check into Lutron. I was hoping someone had direct positive experience with a particular brand or something.
  18. Back in the day...like 1980, my dad had these light switches with little code address dials on them. You set a unique address and then there were these little base station deals that you could configure a button on it to turn on any particular code. There was also an "all on" and "all off" button on the remote control. Press all on, and our farmhouse would light up like Shawshank prison looking for Andy Dufrene. Pretty sure it's called X-10. Most of which leak and don't play well with LEDs. I would like to have something like that for the master bedroom. There are all sort of "smart" wifi enabled switches out there but they all rely on a phone app. I want a remote of some sort that I can press a button and turn on all my outside lights. I don't care one way or another if it's wifi, although that would be nice when we're pulling up and it's dark, but it's not really the main issue. I want a remote that plugs in the wall and has a 1 button, all on switch. We have 3 different light switches to get 100% outside lights on and they aren't next to each other. Thoughts?
  19. I say legalize and tax it. I don't have a dog in this hunt though. I smoked pot a handful of times, all of it before 1990 when I graduated from College. I recall it making me paranoid and I'm already paranoid enough these days
  20. Well, I was just guessing anyway . I know the photos that I take that seem to be the keepers all run at a variation of what I suggested above, but I shoot on a Crop(Canon 80D) and when I stop down off the min F-stop the clarity of my lenses improve. Therefore if you're shooting a 2.8 and stop it down to 5.6 or something, the same thing probably happens. I tend to take most of my landscape shots hand held and even with stabilization 1/250 appears to be about the limit to prevent motion blur, your mileage may vary. Very nice shots however, thanks
  21. Malsua replied to Gunnz's topic in Handguns
    In a large amount of states, transferring a handgun between residents does not require any documentation either.
  22. I was going to say...is this a test? My guess. Most are shot F8 to F11, ISO100, 1/500, full frame, somewhat wide, like 35-50.
  23. I've tried them all. Those Terro Liquid baits actually work. I swear I saw a troop of ants carry off one of those other baits, come back and ask for more.
  24. His 13YO cousin.
  25. The followup is "The Burning Bed"

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.