Everything posted by Malsua
-
Comcast causing accidents...
I actually used the video and figured out where this took place. From the crest of the hill to the comcast box, it's a 10 foot drop over about 375 feet. It's enough that cars approaching the crest of the hill would be unable to see the comcast truck until they go over. It's 2.5 degree grade and while not much, it's enough when you have shitty tires and bad conditions. Here's approaching the hill from the direction all the cars were crashing from...also remember, the google cams are 8 to 10 feet in the air. https://www.google.com/maps/@39.749477,-86.3076786,3a,75y,270.16h,82.59t/data=!3m6!1e1!3m4!1smoWD2jTHOszB-B05wB1Lhw!2e0!7i13312!8i6656 and here's the comcast box. https://www.google.com/maps/@39.7494194,-86.3096888,3a,75y,306.79h,70.08t/data=!3m6!1e1!3m4!1sU9LBDyviNwxY_spHfBgpZQ!2e0!7i13312!8i6656
-
Comcast causing accidents...
Here's a few minutes of idiots on the road. They were all driving too fast for conditions...except the one person going slow, who gets hit by a truck going too fast for conditions. There are a couple of issues here. The Comcrap guy probably did what he was legally required to do and he is right to keep his truck between himself and traffic. He also probably deals with idiot homeowners all the time. That said, he's a flipping idiot not to see that what he was doing WAS NOT ENOUGH to prevent other accidents or injuries. If someone had died, he/ComCrap would have been held at least partially responsible. The guy running the camera is also a raging asshole who should have just called the cops.
-
any HVAC guys deal with waste oil heaters?
We had a similar problem with our lead re-melter. Turns out it had a heating element electrode that pre-heated the bio oil it used. The element wasn't getting up to temp and therefore the oil was more slurry than flow and with insufficient oil flow to the burner, it'd puke oil all over itself and not ignite. Clean it, it'd start and off to the races till the next time we needed it. The MSC tech replaced the element and it never had a problem again.
-
John Glenn, Fomer Astronaut, Ex-Senator - Dead at 95
Good Astronaut Shitty Senator..he was one of my Senators in the 80s and 90s when I lived in Ohio. I was not political at the time and I still thought he was an idiot politician. Farewell Mr Glenn.
-
5.56 Headstamp?
Not magnetic. I also found a bunch of rounds with a 96 instead of 89 on them, which I again assume is the mfg date. I read that it's good ammo. I'll get a good measure on it tomorrow and find out what the actual OAL is.
-
5.56 Headstamp?
So I'm going through all my step-father's misc ammunition and there is some really odd ball stuff in there. Of course, he did run a gun shop for 10 years so I guess it's to be expected. Anyway, I found a couple storage boxes(around 150 rounds) of this stuff that LOOKS like 5.56. My issue with it is that it appears to have a slightly longer Overall length than my other 5.56 ammo. Just doing a google search indicates it's Israeli manufacture but beyond that, no clue. I don't have a set of caliper here at home to get a good measure but if I had to guess, it's maybe .030 longer than my other ammo. Thoughts?
-
Shotgun rules
You can do anything you want to a single shot as long as you don't shorten the barrel to less than 18.5 inches(18.5 accounts for ATF ability to make 18 inches into 18.5), else you may get Randy Weaver'd.
-
Looking for someone in the 3-D printing business ...
There are several issues you're going to run into and what you're asking for isn't something that you're going to find from a 3d printing shop. The material is first. I have an older printer and the material is specific. There are newer machines that run with different items, but to get what you're asking for is mostly laboratory type stuff, not commercial machines. I'm not saying it doesn't exist, it may, you're going to have trouble finding it. Next is print time. Even the fastest machine may take several minutes per piece. Finally, resolution is also an issue, your material is pretty thin and the common machines have a resolution less than that. I know you didn't ask for it, but my advice is to find the material you want and have it die cut.
-
Automobile Emergency Bag (Contents)
What size tube? The anti-rollover ball will prevent pretty much anything larger than 3/16 tubing from getting past. Some vehicles also have an anti-siphon screen.
-
Automobile Emergency Bag (Contents)
>>Gasoline Siphon Pump – Arnold small outdoor power equipment siphon pump<< Why? Where exactly do you think you can use this? It won't work on any modern vehicle.
-
New to NJ.. Not to the Northeast Firearm Hoopla
I'm just re-iterating what he said. You do not need any special permission to own a gun in NJ. If it was legally purchased in a different state and is legal to own in NJ (i.e. not banned by assault weapon legislation) then you can legally have it in your home or homes or properties in NJ. You may only transport those firearms to/from a range, a gunsmith/gun shop, other properties you own, your place of business(if you own it) or to hunt. These are commonly referred to as "exempted locations" As a note, hollow point bullets also have nearly the same restriction, they however cannot be transported from one home to another home. If you need to transport hollow points from one home to another home, you must first go to a range, then you can go to the other home. Seriously, yes it's that stupid. Do NOT have hollow points(even .22 Long rifle) on you, your car or anywhere unless you are within the exemptions. Ball ammo can roll around in your floorboards, there are no laws concerning it. If you obtain a Firearms PURCHASER ID card, it allows you to buy long guns, to have unloaded long guns anywhere they are legal and to purchase ammunition that can be used in a hand gun. It does NOT confer any special rights or permissions to handguns except to the "cop on the road" who may not know any better. I'm quite certain that people have been pulled over, searched or been asked about guns, produced a firearms purchaser ID and were let go on their way whereas without the FPID, they would have gone to jail even though they were transporting within the exemptions. You will not get a NJ carry permit. There are somewhere around 1200 carry permits in the state, half of which are provisional work permits for armored car workers/drivers(who can't carry off hours) and the other half are judges, billionaires or celebrities. Welcome to NJ, Abandon all hope all ye who enter here.
-
Snow blower delivery?
I have a Compact 24LE Ariens. The issue isn't 16" of snow. Mine will blow into undisturbed snow over the bucket and keep on truckin. The issue is EOD(end of driveway) or plow leavings. I can still bite into and clear those but it's a slow go. Push in, stop, let it clear it..etc. I almost bought the bigger motor for mine last year but ended up buying a gun instead. It really depends on how much you are clearing. I have a snow plow for my truck, so I clear the apron EOD with that and do the rest with the blower. Even the Compact 24 like mine is a great machine.. it shoots snow 40+ feet most of the time. I needed the small width for my pathways. If I had a "normal" house, I'd probably buy the 28 deluxe. If you have a LOT Of heavy wet snow plow leavings, consider the bigger engine...it'll drive right into without much effort.
-
Camera advice Nikon D3400 vs D7200
Buy the cheaper camera and spend the difference in lenses. As to phones keeping up with full size cameras? Perhaps, when you're sitting at lunch with your friends and want to get a candid shot. In pretty much any other endeavor those 8mm sensors just don't gather enough light or information. You know the old saying in racing, there's no replacement for displacement? The same applies to cameras. Bigger is better, with one slight asterisk. When shooting wildlife at long distances and you have to crop on a full frame, a crop sensor camera can gather more pixel information because it's already "pre-cropped". There is also a lot of truth to the statement that the camera you have with you is better than the one you left at home because it's too heavy.
-
Detecting the language of suicide: There's an app for that
The question "Have you ever had thoughts of suicide" or "Have you ever thought about harming yourself" are gotcha questions. Always answer NO. A Yes answer can have lifetime consequences.
-
Snow blower delivery?
I would buy it at a local power shop. I googled and found "Northeast Equipment" in Cedar Grove. They will configure it and properly align the bucket. They will get the engine running and make sure the belts and everything are properly aligned and tensioned. This isn't to say you can't do it, but it can be done wrong. They will also service it. If you're looking at decent brands, Ariens and Honda are two good ones.
-
Supermoon
Thanks...in some ways it has more character than a full moon. Specially when everyone and their brother is currently photoshopping them into everything. heh. Some are pretty funny. I saw one of those 50's movie covers with everyone running while looking back and there was the supermoon.
-
Supermoon
Just for the sake of completeness, I wasn't able to get a shot on the night it was at perigee and full, but I took this picture on Saturday while it was still waxing gibbous.
-
Jack Reacher Movie
Should have called it Jack Can'treach'er. Maybe Jack Needsastool.
-
Supermoon
I tried a number of different exposure settings and Fstops until I got something reasonable. Every time I was touching the fiddling with exposure or whatever, I was shifting the frame a little. I finally had something decent, shot, shifted the exposure, lifted, shot. I actually wanted to try stacking like 10 shots of the moon itself but the shitty tripod won and I gave up. heh. I have a really good studio tripod at work, but I only have this crappy cheapy at home.
-
Supermoon
Thanks. It was a big moon, but this is a massive(4lb) zoom lens that makes it look huge. My tripod is a piece of garbage and even with a 10 second countdown timer, it was STILL shaking slightly. I'm going to have to finally buy a decent Manfrotto. I shot it on Manual. F/6.3, ISO100, 1/400, 600mm(960mm@35mm equivalent)
-
Supermoon
Thanks...took that at about 6pm tonight. The moon had just cleared the trees on the ridge on the other side of the lake. The cool thing is you can see the shadows of the trees in the water on the other side of the lake. I also have a 30 second exposure of the water but it was way too smooth and frankly blown out. That moon is bright tonight!
-
Supermoon
Yeah, I know...it's everywhere. I went down to the clubhouse near my house and shot it over the water. This is a vertical composite. I shot the water, lifted up and shot the moon. Canon 80D with my 150-600mm lens at 600mm.
-
How long before all the panic buyers start unload thier "investments"?
Nope.
-
Transporting collection for move to Florida
Aggressive Maryland cops that like to find guns and run people through the system. Supposedly they have plate scanners linked to a FL concealed carry database. They jacked one guy up a few years ago and he didn't even have a gun in the car. The cop keep pressuring "Where's the gun" and the wife said "I don't know where he put it" and then it was a trip through Maryland Injustice.
-
NJ Stun Gun law ruled Unconstitutional
I'd definitely carry one. Since the statement is from the AG...does that mean there is no more enforcement?