Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

JHZR2

Members
  • Joined

  • Last visited

Everything posted by JHZR2

  1. Believe the person who processes the firearms stuff is "Special Agent ______".
  2. I called my local agent today, and he said he is so busy processing that I should try again next week. Is there grounds such as this that would allow use of the NJSP instead? I don't want to complain about the guy - I have every reason to believe he is currently overburdened. But I also wish to get documents submitted.... Apparently now they must talk to everyone... no impersonal drop off of paperwork. I'm not well enough exposed to the processes to know if that's actually consistent with any practice, or if it's local administrative steps that should be flagged... I wouldn't particularly care if it were a matter of going by at 830 tomorrow morning... but to wait a week?
  3. I called NJSP today about this, and the woman I talked to confirmed that they are returning them with extensions already enabled to reduce administrative burden. What I couldn't get an answer on is if they would do this if six were requested. i live in a municipality so have to go through local PD, but I was hoping there would be precedent that was easily stated by the SP. My municipality won't do six with a ready extension. I'd like to make the case to do so due to administrative burden on the local agent, and the hassling of my personal references. Was hoping to have more of a case based upon what NJSP does. So do they allow 6 plus extensions upfront now?
  4. Ive been thinking about this too... free advertising to say they did something, sure... but in addition to actually voting with wallets, what's the best way to state as such? I got a call from Alamo today due to a recent car rental. I answered that thenrental was fine, but I'd definitely not be renting again. I was hoping they would ask why, so I could use the NRA basis. No dice.
  5. I can't say I see a reason for bump stocks for defense or a well regulated militia or any of the other common angles that we hold dear under 2A. Freedom at large, sure, but there's lots of stuff we can't buy/do despite freedom. If there were two things that were common sense, it would be (IMHO) bump stocks and mag capacity. It's stupid to vilify SA weapons, but it's realistic that going longer before reloading, and rapidly firing in a more convenient/faster manner, might be less than necessary. At least on mag capacity, im sure some in here would argue that I shouldn't say what they need for defense, and therefore it's held wihin an unrestricted 2A right (or some logic along those lines). And that's your opinion. But there are some effectors that may have a more realistic play in causing damage than, say, bayonet lugs...
  6. Honestly, not sure what the White House will do for us. In the big scheme of things, they have our (the collective law abiding, pro 2A and generally gun owning public of America) best interests in mind. I think what would be much better is to contact your state and federal representatives, because in this nearly one party state, showing that there are others with differing opinion is the only thing that can put them on notice. Also if there are NJ representatives from other districts/areas that don't technically represent you, but represent us on here, perhaps a message to them also would be smart...
  7. Any updates on this? primary still has the letters up, but has gone to an FSC mod 2, which seems different. Some of the other model names also don't exist now. Looking for a device for the end of a 7.62 AR rifle. Id like something with traceability to the legality. Dont care for a ton of rearward flowing gasses making folks at my shooting table annoyed.
  8. Of course we are. But to many, the rules don't prevent most firearms from ultimately being acquired. I personally resent the reference request more than anything. But its all stupid and doesn't make anyone safer unfortunately.
  9. Isn't this the whole premise of reciprocity or constitutional carry (the two of which may be different)? That no one state may validate or invalidate one's right to bear arms that is guaranteed by the constitution? So similar to a DL, where no state shall impede or invalidate the basis of operation of a motor vehicle (unless that person did enough illegal activity to justify removal of the licensing privileges), shouldn't the same occur in this situation? Unless revoked, NJ accepts licensure of someone from FL, including if the person is a dual resident and "resides" in NJ for some of the year. Maybe Im way off on this???
  10. Given that the NJSP specifically designates the M1A from Springfield Armory as acceptable, is it the best bet to buy one of those vs a James River or one of the ones from the outfit on Long Island? Maybe its overthinking, but it seems it may create less issue in future years... or not. Time will tell. Im not the most enamoured with SA right now, including rumors that some parts may not be US made. James River I suspect may be the better product. Im not looking for a "SOCOM" version. Thoughts?
  11. Id look at the Chevy Colorado diesel ZR2. You can get a crew cab, diesel should get good MPGs, and off reading would be good. Tacoma is available similarly equipped. Probably would avoid raptor and such things as they will have a greater fuel penalty.
  12. Hello, Just want to clarify a few things that aren't evident to me procedurally, from my reading other discussions... 1) Based upon an assumed approval for an extension of permits, the most permits you can request if adhering to a single purchase per 30 days is 5. This allows sequential 30 day buys, i.e. day 1, 31, 61, 91, 121 and 151. Day 181 is not allowable under any circumstances. That isn't really a question, I believe this is fairly well established. 2) Given the schedule in #1, what defines day #1? Is it the day the PD chief signs/approves the permits, or is it the day they are picked up? 3) If one desired to have an exception to acquire more than one pistol in a 30 day window, does this re-start the 30 day clock for regular purchases? For example, say I purchased a pistol on day 1, then exercised my exemption to buy more for the purpose of building a collection on, say, day 15. Since I was buying on the basis of an approved exception, is the next allowable window for a regular purchase day 31 or day 45? 4) If I had a desire to buy three pistols per #3, say one for range use and two as collectibles, does the exemption list all three, or just the two for the collection? To make this interesting, as an example, say I wanted to buy an off the shelf revolver, and then an 1800s colt and a 1700s flintlock pistol. The fact that serial numbers are needed aside, the two that one would buy under exception are the colt and the flintlock. but to exercise the exception, and acquire a suitable range gun, do all three go on for the exception or just two? What if they are all from different vendors? 5) If there is a collectible that I desire to acquire, and do not desire to request exceptions, is it allowable to purchase the firearm (i.e. nothing precludes you from buying a gun if you do not take possession), have it shipped to my FFL (assuming they are agreeable to holding it), and then pick it up when the clock allows? 6) Is it best practice to provide the exception request for multiple purchases at the time of initial permit paperwork submission? Ive seen some posts indicate yes, but others that indicate that procedurally the exemption is different. Thanks for your time and insight!
  13. So if an OE mag is labeled for 15, but can force 16, its OK... but if you modify an LCM for 15, you really need to be conservative...
  14. Thank you. Key term may be "sold". So if I buy something molded and marked for 15, and assembled with the intent to comply, its a 15. If one does a DIY job, no matter how good or true to holding 15, it may not hold water. But Ive seen 15/30 type mags, at LGSs that can be disassembled, yet are sold as NJ legal 15/30... The issue of "permanent" is more of the crux of the matter to me... I guess. Not that Ive ever been questioned by anyone, nor am I prone to being stopped by police for other matters... But compliance to the law is important to me.
  15. OK, so this is essentially what I was getting at. Pin or no pin, regardless of what else would be done, if you remove the riser, the parts cannot be used to feed more than 15 rounds. Ill bet you can buy a full length spring for this one too... just like you could go to DE or PA and buy a new 30 round.. But you cannot revert this thing back to load more than 15 rounds in any way without buying parts or a new magazine.
  16. Where has this been established at law? Is it established that epoxy is deemed permanent within the law, and then guidance provided to/by NJSP that presence of epoxy is an acceptable test of permanence? Ive not seen this documented at law and by any specific guidance from NJSP. Im happy to be wrong, but Im not sure that I am... Im using 10 round mags as a result...
  17. Thanks! Ive seen these in LGS. Do you know if these hexmags are either cast to only take 15 rounds, pinned, blocked, or what? If the plastic was cast in a way that there is material for the entire length and width of the channel that the follower rides in, so it was solid below the point, that would require machining or other substantial new work to make it viable. That's different than undoing something. Better would be a 20 or 30 round size with a solid floor or a false floor so the spring was only sized for 15, which is essentially my theory above...
  18. It seems like many of these threads just turn into arguing points of view... So upfront Im NOT trying to be a jerk or be argumentative for the sake of arguing... So Id say that the magblock with an LCM and full size spring is LESS permanent, even if pinned, epoxied, etc... If I have "A" magazine (i.e. one, or I suppose it could be if you have more than one but all are altered), and I cut the spring, it is permanently altered. Unfortunately any DA can probably "what if" you to death, but NJ will never change the fact that other states dont regulate LCMs. So... if I cut the spring on one, and then I wanted an LCM, Id either have to acquire new parts, or acquire another LCM to use for parts. The former is questionable based upon intent, the latter is a felony as it is. Therein lies the differentiator. Putting a block into an LCM with a full length spring, means that it can be reverted. Riveting the follower to not go below a certain point, with the full length spring, means it can be reverted. Yes, we talk about pins, rivets, and epoxy, but all of those can be undone with some level of workmanship, and when undone, the spring is present that the magazine can still properly feed the gun. It seems like the language in the statutes is that an LCM must be able to feed the weapon. Therein lies the differentiation, if I cut the spring, without a solid spacer in the bottom, the spring would just fall to the bottom, and be unable to feed. Anything can be fixed back, but this permanently alters the item that actually allows the magazine to feed the weapon. Anything else can be reverted with the parts IN the magazine... This cant be. If someone was to buy replacement parts, they would be buying a new magazine or an item that when placed into the LCM would revert it... But it would require acquisition, versus just remanufacture and reversion with all the parts in place. Seems like cutting is permanently altered, if you cut the spring and throw away the rest... Otherwise NO alteration besides cutting down the mag body to only hold 15 rounds or less is acceptable. Because then anything that could house more than 15 rounds will always be able to feed more than 15 rounds back... with reversion... Just thinking out loud... This is why I use 10 round mags in my M4...
  19. Is there a good site with a set-up "contact your representatives" dealing with this?
  20. Ive literally spent hours reading discussion on NJ LCM rules. Ive read the njsp documents... but I cant seem to find anything specifically on the following: If one were to take >15 round magazines, and put a shorter spring, or cut the spring length down, wouldn't this be a permanent alteration? There would then need to be a solid means of supporting the spring at the bottom, because if not, you couldnt really load the thing at all. Im tempted to take one of my 10 round pmag innards out to PA to see how to fit in the larger mags that my brother has. Id rather have 15 than 10, but I have the spring so its easier than arbitrarily cutting something. I could try metal mags and pmags this way to see what is better. It seems that this is a no brainer solution. Rivets or pins or epoxy or blocks aside, if the spring is too short its too short. Then any solid in the bottom would need to be there to raise the spring. Any modification removing that block would make it useless. Therefore it woukd be permanent without acquiring a new spring or mag, either of which would be illegal in nj. Am I missing something that makes this a ridiculous feat? It seems that all blocked higher capacity mags retain the full spring and block the follower. What am I missing?? I personally prefer 20rd mag length in an ar from aesthetic and utility (placing it on something, resting on the mag) perspectives. I dont like 30, and currently use 10s. But i like the idea of cut 20s. I know PK90 sells 15/20 pmags, but not sure if the spring is permanently modified. Thanks!
  21. I know this is an oldie, but bumping since the letter seems to not be able to load anymore. Can it be found somewhere else? Generally 10 round mags are easy to find, I guess because CA is a big enough world economy on its own to justify it. That's the no-brainier solution I suppose... And the one I've gone with Except that we can have 15 round mags and the extra five is good at the range. Even NJ gun stores sell product that seems questionable to me having read two njsp documents and about fifty threads...
  22. Hello, Searched a bit but didn't seem to find a response. Can references be from out of state? If I ask a colleague who lives in PA to provide a reference, does that work? Also, if I reuse prior references, does it speed up the process, or am I better off always changing references? Thanks!
  23. So I have interest at some point in buying a J frame, because I think it is pretty neat all the advanced materials and alloys they put into, say, the 360PD. Now, that said, there really is only one reason to have such a J-frame... and it isnt home protection, target practice, etc. It is really designed towards CCW. Granted, I suppose my 2nd amendment right allows me to buy whatever I want, and under the guise of collection, there is nothing wrong with it. But, is there any reality to the fact that someone buying such a weapon, when they hae no need, no permit to carry, etc. might be flagged as an anomaly, dangerous, etc. because of their ownership of such an item? I dont want to be flagged because I have a desire to buy such an item that has such a specific intended use. Kind of discourages me a bit because of fear. Thoughts?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.