Everything posted by n4p226r
-
New inheritance question
Man owns gun. His wife has passed away. He has two kids. He dies, who gets the guns? Assume nothing in will. I know of a situation that is much more complicated than this but this may set me up for the 2nd question.
-
Can I own a compliant 6920 in Jersey?
I'm not quite sure what you mean. Every gun I've seen had a hole drilled through the comp. partially into the barrel. A pin inserted. And welded over. I'm not sure of a different way to do it.
-
Can I own a compliant 6920 in Jersey?
as far as i can tell, only the 6720 currently is http://www.gandrtactical.com/cgi-bin/commerce.cgi?preadd=action&key=6720SLWR
-
how many of you have gone with the more "upright" pistol grips?
if you are talking about my posts. nice catch. SSA
-
Can I own a compliant 6920 in Jersey?
should be good to go. pin the stock. pin a compensator/brake instead of the a2 flash hider, grind off the bayonet lug. colt lower roll marks on the 6920 are the below two that i know of. LE6920SOCOM_LWR.jpg http://www.floridaarmory.com/image.php?type=D&id=548 i believe the 6720 is the AR-15 marked lower
-
how many of you have gone with the more "upright" pistol grips?
looking at the grip pictures on gearscout it seems the front of the bcm and original moe k are the same. the back on the bcm is rounded vs the straight on the moe k. not sure how the umbrella compares. the BCM looks the best (imo) so thats what i went with. well, plus the swappable front straps will let me use it on both lowers.
-
Non compliant out of state purchases
it's not. if the off the shelf compliant is what you want. but like the thread where the guy with the M&P sport wants to add a free float rail and muzzle break, it may work out that way. he paid $900 for the gun. say he sent the barrel to adco to have the work done. $900 for rifle $65 for barrel threading $55 for drill and pin low profile gas block $40 to pin a muzzle device $45 for low profile gas block from BCM $95 for BCM comp $200+ for a free float rail so now his rifle will cost $1400+ because he had to buy parts twice. even if he overpaid $200 on the rifle its still $1200+ (not including any shipping charges) if he just browsed the midwest px kit he could pay $95 for a lower, $60 for a LPK, $100 for a stock kit, $130 for a BCG and bolt, $95 for a stripped upper, and $150 for a barrel he would have saved headache and a few hundred bucks.
-
Next indoor range design.. longer port walls for the rifle guys..
If I hear a big boom I get excited and want to go see what it was Actually I have a seconds set of earmuffs if it's really bad
-
Non compliant out of state purchases
Depends on who you mean by "they" and what type of compliant upper you are talking about. Mine just happened to be a 14.5" with low profile block and pinned battle comp so it wasn't an add on cost. The dealer spec'd it from the manufacturer that way. Obviously it costs more for someone to take something like a 16" with non pinned a2 and front sight post with bayonet lug because they are modding and replacing installed parts. You essentially pay twice. Figure adco charges about $100 plus parts
-
Out of state training with low cap mags
why not email them and see what they think? i'd probably figure out a way to buy 30rd and either ship them to store at a relatives in SC or send a few to midwest PX. his turnaround time is great too. although it may not be a big deal. i've heard some take classes with a 308 AR and 20rd mags with no issues
-
how many of you have gone with the more "upright" pistol grips?
whats the wrap in front of your modstock? i went with the Mod 1 because i like the higher backstrap side, and the regular "non-tang" insert works great for my noveske gen II lower. i had to file the tango-down down and it kinda wasnt fun..
-
how many of you have gone with the more "upright" pistol grips?
this is what i figured. i have two lowers. the first is fully built 14.5". the other i may leave the tango down grip on there until i decide what i am going to build it out as. if i decide to go with something like an 18" bipod/scoped with rifle buffer or something, i figure that may work better. but for the 14.5", pinned on position 2, it seems to work better. i'll know soon enough.
-
how many of you have gone with the more "upright" pistol grips?
i think SBRs are begging for it. any idea which you plan on going for?
-
how many of you have gone with the more "upright" pistol grips?
i just finished putting together my first AR and almost immediately knew that the grip angle was going to be an issue. past ARs i've shot always had the stock pinned fully extended. mine is pinned on 1 or 2 clicks out (cant remember) so i quickly swapped out the tango down bg-17 with a BCM mod 1 grip. the BCM mod 1 looks really awkward to me, but holding it instantly feels better. so who's switched to this style grip. i know magpul makes the k and k2, umbrella corp grips are supposedly more upright, and the BCM grips are obviously the same. here is the tango down http://img.photobucket.com/albums/v217/wsaraceni/222A206A-EA9C-4DD2-94BE-E16ABCAE88D4_zpserxjvamw.jpg here is the BCM http://img.photobucket.com/albums/v217/wsaraceni/A1B0DF4F-0613-42FF-93FB-BA6CB90DD42F_zpsb0czcndq.jpg and here is the BCM sitting on top of the tango down before install http://img.photobucket.com/albums/v217/wsaraceni/B34BA667-16BD-4372-9F01-89EEB1BFE458_zpsaekbiz8c.jpg
-
Friday morning 12am. Ammoman.
my shipment came fast. wasnt the ammo by weight deal but ordered the same time
-
I died a little on the inside when i saw this
thats the new EBR!!!!
-
Zeroing in my AIMPOINT Pro - help
im not advocating a 100yd zero over a 50yd zero. I don't really see a clear benefit to either one. i just found it odd that the "experts" like vickers are saying they prefer 100 yard zero while it seems the 50yd zero is much more common. i assume as long as you pick one and learn the hold overs/unders correctly you can shoot either.
-
Zeroing in my AIMPOINT Pro - help
you might be right. i can't find the reference to what i was talking about. i'd love to take his one day into carbine course.
-
Zeroing in my AIMPOINT Pro - help
i guess the thinking of the 100 meter zero is that from 0 - 200 you are looking at POI = POT - less than 3 inches. with the 50/200 you have POI = POA +/- 2 inches or so. so it may be easier to never have to worry that part of the time (from 50-200 you are actually shooting higher than your POA and below 50 or above 200 you are shooting under.
-
mobil 1 synthetic observation
it just weird using so little oil on the rails. i've been using tw-25 grease until now.
-
Zeroing in my AIMPOINT Pro - help
dont base it off of my post. i'm still researching the benefits of each
-
Zeroing in my AIMPOINT Pro - help
im not 100% sure of the benefits. heres a guy from knights armament talking about it http://www.m4carbine.net/showthread.php?107572-Zen-of-the-100-Meter-Zero i've also read larry vickers wants you to explain why you dont use 100 yard/meter zero in his carbine course if you come with a rifle zero'd for something else.
-
Is a free float rail necessary?
you dont. you either put on a low profile gas block before, or you cut it off and put on a clamp on gas block. if you decide to go with a rail that uses the standard barrel nut, you can always just shave the front sight block. or send it to someone that can do it for you. Adco only charges like $40 for that service.
-
mobil 1 synthetic observation
just cleaned my p226 with fire clean. seems to be much easier to clean than normal for me. i like it so far.
-
Zeroing in my AIMPOINT Pro - help
seems weird that everyone chooses the 50/200 and most instructors ive seen recommend the 100 yard zero. most arguably mr vickers