PeteF

Nothing to translate. A rifle pointed at your head gets the point across real quick.

NA is "Not Avalable" or "Not Applicable". Putting that in a box is not a lie. If you say unemployed but are, that is a lie. Not answering a question is not lying.

How can you beat?

Shes a beaut. Good luck in the next 6 months

Not to mention the havoc of potholes. Make sure your spare is up to snuff. We are gonna need them.

Whats the difference between the Giants and the Eagles? Giants started golf season 1 week earlier.

5-6" in union county, drifts are 1-2 feet tho.

Cry once http://www.amazon.com/Neiko-Pro-Grade-4-Inch-Torque-Screwdriver/dp/B000RZ1D86

Its still optics planet, with another name. Check avalability before ordering.

Spray it with some brake cleaner. What I do, 1. Field strip gun 2. Run a patch soaked in solvent in barrel 3. Put barrel to the side 4. Clean slide and frame, gives solvent time to work. 5. Run another wet patch through barrel 6. Couple of passes with bore brush 7. I use a patches and a jag until patch comes out clean. 8. Lube and reassemble.

Stick a fork in Tara, shes done.

Extreme bullets 1000 124 9mm 1000 180 .40 1000 230 .45 1000 5.56

Better. The plating on the Xtremes is thick. I have loaded them to the same as jacketed with no ill effects

I don't think the guy in the video has anything to do with Little crow. He says he's from AccurateShooter.com. That sight has many reviews of different products.

I picked one up a little while ago but haven't had the chance to use it yet. There is a video on youtube where a guy compares the wft to a regular trimmer. He gets very consistent results with the WFT.

Flashbang? What would the weapons charges be? I can see illegal discharge. I guess maybe brandishing when he pointed a gun at the cops? Shooting at the cops I would think would ring up as attempted murder, not a "weapons" charge.

Absolutely. The bag packed that way looks like a recipe for a ND. Lightstick could easily get in the trigger guard while carrying the bag. Duct Tape, don't leave home without it.

Works fine, 4oz liquid lanolin 16 oz 91% iso. alcohol, 500 223 cases, no stickers, didn't use any "extra" pressure, no dents in cases. IIRC ~5 bucks for 20 oz

refer to NEC 210.7(d)(3)(b) A nongrounding -type receptacle(s)shall be permitted to be replaced with a ground-fault circuitinterrupter-type of receptacle(s) These receptacles shall be marked "No Equipment Ground". An equipment grounding conductor shall not be connected from the ground-fault circuit interrupter-type rec. to any outlet supplied from the GFCI. This configuration will not work with surge suppressors, but do the primary job of preventing electrical shock to a person.

I use http://www.midwayusa.com/product/814722/rcbs-rangemaster-750-electronic-powder-scale-750-grain-capacity-110-volt They regularly go on sale for less than 100. IIRC, I got mine for 89. I've been using it for ~4 years. Been very accurate for me. I let it stabilize for ~15 minutes, then use check weight. Verify every 1/2 hour or so doesn't drift more than 0.1 gr.

It's free 2 day shipping. I have received stuff next day. I haven't yet had something go longer than 2 working days.

Salesman is a complete idiot. How does a child buy a rifle legally? Um can't be done. Parent or guardian buys rifle legally, making it his / hers and lets the child use it while supervised.

First thing, you are helping your grandmother change the outlets right? It's against the law for a unlicensed person to do work on anything but there own residence. Now that that's out of the way. http://www.nojolt.com/GFCI_installation.shtml Make sure power is off!!!!!! Take the receptacle out and look in the box. If there is a bare copper wire or a green coated wire, then you are good to go just hook up a new receptacle. If only 2 wires, and the wires are copper, just replace the receptacle with a GFI receptacle. Attach the black (hot) and white (neutral) wires to the appropriate sides of the receptacle and put it back in the wall. Good to go.

I'd go further and say throw the directions away. I spent an hour looking for a part mentioned in the instructions, After which I found the described part wasn't even used on my version of the press. Go online and watch the setup videos, much more helpful.

Brought my .40 p226 and my 92fs mags. Didn't realize until after I'd setup stands and targets. Wonderful way to waste a morning.