Everything posted by njJoniGuy
-
For anyone who works at heights
Next time you're in Toronto, Ontario go up to the observation deck in the CN Tower. There's a section of plexiglass floor. I couldn't step foot on it. Scared sh1tless looking down. But both my daughters had no problems at all. http://www.cntower.ca/en-ca/plan-your-visit/attractions/glass-floor.html
-
RCBS Powder measure
My 62 grain zombie rounds are loaded with the RCBS Uniflow powder measure with the small drum installed: 62 gr SS109 projectile (5K pack available again from Wideners) Small rifle magnum primer (CCI or Wolf) 24.5 gr Hodgdon H335 flake powder Lee Factory Crimp on the cannelure I have loaded in excess of 10K of this round on my RockChucker (It was the reason I bought my Giraud trimmer)
-
RCBS Powder measure
I had the same problem as you, loading my match rounds with Varget. The RCBS powder measure is great for flake and ball powder, not very good with stick. Using the RCBS, best thing I did was set it to dump light, then trickle each load up. Then I discovered the very inexpensive Lee Perfect Powder measure. It has a rubber sweep and is much gentler on the extruded stick powder, though still less than perfect. Still need to dump light and trickle up. Finally bought a second hand RCBS Lyman 1200 DPS II. It's an automated powder measure and electronic scale. For single stage loading, it's as fast as I am and accurate to 0.1grain 98 times out of 100 Edited to correct my error in posting the brand name last night when I wrote the reply
-
For anyone who works at heights
Watching that video brought back the sweats from my younger days. The former family business did televisions and related systems and hardware for the hotel industry. My most terrifying (but necessary) climb was at the Lord Baltimore Hotel during its renovation in the mid-80's Elevator to the top-most floor, staircase one floor up to the elevator equipment floor, then straight up a vertical ladder in the middle of the room Three stories straight up through a 2ft square hatch in the 8ft square roof to where the TV receiving antennas (the old fashion analog type) were masted. Once up there, it was a beautiful view of the entire Baltimore area. But the first trip up that ladder was scary as hell ! http://
-
Kinda Got the Pistol Caliber Carbine Bug
You say you don't do handguns, but how would a handgun/bludgeon combination work for you? The HiPoint handgun uses the same mags as the carbine, and best of all, provides you with an arms-length alternative to death. And when you run the mag dry, as a final alternative, you can beat your adversary with the empty HiPoint handgun. It sure has the weight to it! My matched-ammo-pairs are in 5.56 (the carbon-15 AR pistol is a FUN gun!), .45acp (HiPoint), .357Mag (Remlin levers and S&W revolvers), and of course .22LR. But I'm lacking the Cougar 8045 to go with my CX-4 in .45acp Anyone have one they're tired of?
-
Thought You Precision Rifle Shooters Would Enjoy This
Does he rent rooms by the week???
-
NJ Resident Getting a Concealed Carry Permit in PA
Texas non-resident permits are still accepted by the Queen of Sheba Kathleen Kane. The kicker is that you must take both the written and range portions of the test in Texas. Coming soon (I hope) - a one day (or overnight) junket to the Dallas area to take the written test (that you've prepared for here) and pass the range proficiency requirement THERE. More details as they develop.
-
R.I.P. M1-Matt
At the Feb 9, 2008 ARFCOM Blast at SJSC: http://s131.photobucket.com/user/njJoniGuy/slideshow/Blast020908 G-d rest your soul, M1-Matt
-
Kinda Got the Pistol Caliber Carbine Bug
Scorpio- If you're going to shoulder it, the barrel length must be at least 16" and the overall length must be at least 26" If you're NOT going to shoulder it, it's a handgun and subject to another completely different set of evil features. If it's a semi-auto, the toughest one to deal with is the manufactured weight limit of 50oz max A lever action (like the Henry Mare's Leg or the Rossi Ranch Hand) lets you avoid the weight factor Myself, I have both the HiPoint and Beretta CX-4 in .45acp Yes, the HiPoint is fugly, but it goes bang everytime and you can't beat it for price and lifetime USA-made warranty The CX-4 has some upgrade parts available if you want to spend more money on it, but the best part for southpaws like me is it's easily reversible Can't help you on a pistol-caliber AR platform though, sorry!
- Second Amendment Preservation and Protection Act (SAPPA)
-
FID and Domestic Violence
It all comes back to NJ's original premise on firearms - that they are all illegal unless and until you can prove yourself worthy. Puts the Federal 2A on its head. Nappen hates to lose. I hope this stokes the fire in his belly to strike back at the powers-that-be in some meaningful (to us) way.
-
How to figure out what a rifle is chambered in?
Not only a chamber cast, but you would be well served to slug the barrel. That's the last place you want to be surprised with a live round in the rifle.
-
Hollow point ammo
Fixed it for you.
-
I cannot recomend this gun
As a southpaw .45acp addict, I really like my CX-4 In this caliber it's really only a 100yd gun, but that's ok That's why I practice at 200/300/600 with my .223 spacegun with iron sights My short wishlist (given the 2C:39 and 58 restrictions here in the gulag) includes the handgun companion to this piece, the Beretta/Stoeger Cougar 8045. If anyone here has one and would like to sell, I'm in the market (and with permits)
-
Is it legal? Survival AR-7
I agree 100% with Pizza Bob
-
How much ammo is enough ammo!
As my late father, a radio operator / gunner on a B-17F in WWII said, it was hours of tense sheer boredom punctuated by minutes of pants-shitting terror.
-
S&W Model 60: normal for brass to get stuck?
Best done with a .40 brush to clean up the cylinder bores
-
6.5 Creedmoor build, just done
NRA High Power Rifle Rule 3.16.1 The use of compensators or muzzle brakes is prohibited. That goes for all NRA Approved or Registered Matches, including F-class. I guess you'll have to wait until the Fall, when the Frozen Nutz series of 300yd prone matches begins at SJSC in Winslow (Camden County) Not NRA Approved or Registered, so we let the compensator rule slide. Matches will begin the 3rd Sunday in November, monthly through the 3rd Sunday in March.
-
6.5 Creedmoor build, just done
Nice build! Come try it out the first Saturday of the month at the only 600yd range in NJ open to civilians. Match details (Midrange prone / F-class) at www.CumberlandMatches.com
-
I figured I should officially introduce myself
Nice old-school Pachmayr style pistol box! And I see you really like the 1911 style platform (Must be because John M Browning knew what the hell he was doing!) Welcome to the forum, Joe Brian in Gloucester County
-
Short Hills mall carjacker found not guilty of unrelated gun charge
http://www.lawyerscompass.com/new-jersey/bloomfield/614063-beam-raymond-r-jr-attorney.html http://www.zoominfo.com/p/Ray-Beam/123990090 https://local.yahoo.com/info-119485579-beam-jr-raymond-r-bloomfield;_ylt=A0LEV79K9SZVfz8A8ZInnIlQ;_ylu=X3oDMTE0MjVmZG8wBHNlYwNzcgRwb3MDMTAEY29sbwNiZjEEdnRpZANZSFMwMDJfMQ--
-
PP to the state
That top copy (to which you refer) is also ILLEGALLY the "Form of Register" of the newly acquired handgun. It comes OFF the seller's registration record (if the Seller is a PRNJ subject) and goes ON the buyer's registration record. That way, the day after Kristallnacht the authorities know exactly where to go to collect the handguns. Nobody will hear a thing back from them unless the gun comes up hot when they enter it in the database.
-
Short Hills mall carjacker found not guilty of unrelated gun charge
http://www.nj.com/essex/index.ssf/2015/04/short_hills_mall_carjacking_suspect_found_not_guil.html What a friggin crock
-
Home defense shotgun
And on that subject, MidwayUSA.com still has Estate 12ga 2-3/4" 00Buck $80 case of 250 (10x25) for the budget-restrained zombie fighter. Item #219988
-
Reloading lead with or without a gas check??
As to your load data, I use Titegroup exclusively for my handgun loads, including my .45acp For 200gr lead RNFP (what I shoot mostly, from Rogers Better Bullets in their .45LC selection) my loads range from a wimpish 4.4gr to a usual 4.5gr (lite handgun) to a nice stout 5.2gr that I use in my Beretta and High Point carbines. No gas checks on any of them, ever. Be sure you bell the brass sufficiently so that when you seat the lead bullets you don't shave lead. A Lee Factory Crimp die is great at giving you a proper crimp on these .452 projectiles. Finishing up with a Lee Bulge Buster setup (which uses the body of the LFC die to make certain that the entire round is not too big around) is how I complete the process.