Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

njJoniGuy

Members
  • Joined

  • Last visited

Everything posted by njJoniGuy

  1. What about the sales tax issue on transferred goods that came up a week or so ago? What is Glenn's position?
  2. There's 4 inches on the ground here in Hoodbury (Glou. County)
  3. Especially in the case of .300 Blackout where you've created a neck and shoulder out of the previously-never-annealed area of straight sidewall of a .223 case. Topher will be lucky to get one more loading of that brass before the neck splits (the biggest problem with bottleneck rifle cartridges.)
  4. The dealer either fibbed to you or cheated you, you choose! You're responsible for reporting the Use Tax for your out-of-state purchases on your annual NJ Income Tax return, Form NJ-1040 You should also not be charged NJ sales tax on the NICS call (a legitimate taxable item) because the FFL already paid the sales tax to the state on it. Tell him to check the phone bill where he gets charged for those NICS calls and he'll see that he paid the sales tax on it already. Now if he wants to bump the fee up to $16.05 (or more) to cover his added expense and make it a non-taxable item, that's certainly his option. But we should NOT be double-feeding the greedy beast that is the NJ Division of Taxation.
  5. If you created .300 Blackout brass by cutting and sizing and trimming .223 brass without annealing the 'new' necks in the process, all that hard work will need to be repeated sooner than you'd like. And as was said above, don't make any more until you fire these first ones. Welcome to the world of rifle reloaders!
  6. A question for the attorneys among you: Could Christie, while he is the Guv, define (in our favor) "Justifiable Need" by Executive Action alone? If so, we need to make it know to him that unless that happens, we are prepared to create a sh*tstorm of badmouthing and ill will towards him in New Hampshire and Iowa before their primaries. Does he want GOP frontrunner status enough to relieve us of the 'JN' burden we now suffer? I'm prepared to drive to NH and go door to door spreading the word about him for weeks prior to their primary if we are left defenseless and he's trying to get to 1600 PA Ave.
  7. But only 'till the WD-40 'goes away' then the primer is active again. The only way to PERMANENTLY kill modern priming compound is to detonate it.
  8. http://www.creedmoorsports.com/shop/Turner_Saddlery_Military_Leather_Dressing.html This is a product that Creedmoor sells to us competition rifle shooters. I'm sure you can find something like it locally. Try a local shoe store or shoe repair shop.
  9. As a highpower competitor and reloader, I deal with my match rounds differently from my 'zombie' rounds. My match rounds (Sierra and Nosler HPBT 52-69-80 depending on distance) are NOT crimped. They rely strictly upon the neck tension of the brass to hold the projectile in place, are boxed in 100's by me and are handled gingerly, not thrown around indiscriminantly. Every point counts in a match and I strive to recover every single piece of brass from the line following each relay. Sometimes the Brass Gods take their due, though, and I leave some for them! My zombie rounds (62gr SS109 and 55gr SoftPoint) are another story. I use a Lee Factory Crimp on every single one of them. There's no telling how they are going to be handled prior to making into the weapon that will ultimately fire them at some point in the future. And the last thing you want is for the bullet to be set back into the case. The .223 is already a high pressure cartridge, with some, but not a lot of room for overpressure. Blowing a primer out (the usual first reaction to overpressure) into the trigger mechanism will make for a bad day if you happen to be firing like your life depended on it (which it may be very soon) The LFC die http://www.midwayusa.com/product/456506/lee-factory-crimp-die-223-remington may be the best $13 any .223 reloader could spend!
  10. You lightly swipe the tip of a finger across the surface of the wax, then pick up a piece of the brass and rub it between that finger and your thumb. A tiny bit goes a long way! It's slicker than sh*t. After you size, you dry tumble the brass to remove any traces of the lube and you're ready to continue the process of bottle-neck rifle brass prep.
  11. I believe a Unicorn could get a NJ carry permit before any of us could. Damn - that's discrimination! Call the ACLU (the Ambitious Club of Lucky Unicorns) and complain!!
  12. or a NJ carry permit, if you happen to be so Blessed.
  13. But glad it had a 'happy' ending!
  14. That's why you use the decapping die (which does nothing but push the primer out) and you GO SLOW. Done it dozens of times (nobody's perfect) and have not detonated a single one
  15. For decapping/sizing bottle-neck rifle brass, you will absolutely need to lube them. I highly recommend Imperial Sizing Wax. A tiny bit goes a long way and a single tin will last the casual shooter many years. http://www.midwayusa.com/product/519525/imperial-case-sizing-wax-2-oz For my non-match .223 rounds I use Hodgdon H335 with both 55 and 62gr bullets.
  16. Use a Lee Universal Decapping die. http://www.midwayusa.com/product/136543/lee-universal-depriming-and-decapping-die Works great. Go slow and wear safety glasses. If you're really wimpy, put a towel over the entire press while you gently deprime the brass. Live primers fall into the spent primer cup (on my Rockchucker).
  17. You do realize that if your Dad is a NJ resident, you DO NOT NEED AN FFL to do the transfer. You need your 4-part PPP, which you and your dad will complete, then he'll mail the top 2 copies to the NJSP and your local PD. He gets #3 and you keep #4. No FFL Fee, no NICS call (or charge) necessary.
  18. You need to get him one of these shirts: https://patriotpostshop.com/products/624
  19. Looks like Woody Woodpecker has been tempting fate!
  20. Just tell the GF she bought you an early Valentines Day gift, so she doesn't have to worry about February now!
  21. I shoot .223 (69gr Sierra HPBT) at 300 Link to match bulletin in your mailbox
  22. You should come out for one of the 3 remaining Frozen Nutz matches at SJSC It's an all prone 3x300 match with 60 record shots plus sighters. Jan 19, Feb 16, Mar 16
  23. Yes Before your local Chief signs your card and hands it to you, you must qualify on the range (and in the classroom) just like his officers have to. eta: This is a helpful read http://www.nj.gov/oag/dcj/agguide/useofforce2001.pdf
  24. For those afraid of "losing it all" because you have to check the box on the PPP application in the future, your explanation (if you DO get refused) is that you were refused for "Lack of Justifiable Need" which is NOT a disqualifier for a PPP. So no worries there. And for those of you with youthful indiscretions, you should look into having them expunged prior to making application.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.