Everything posted by zeenon
-
Cannelure above mouth of case
http://www.midwayusa.com/viewproduct/?productnumber=1165163765
-
Cannelure above mouth of case
Figure I ask the NJ experts here, internet seems to think this is standard and ok: I just bought some 150 gr bulk .308 hornady bullets to try out for plinking, instead of the MK 168gr I normally use. I made only 5 rds but the cannelure is above the mouth of the case. Are they ok to use? I'm going off the Sierra (5th Ed.) 41 to 42gr of RE-15 (.3gr increments) COAL 2.775" TTL 2.005" (Note: Hornady has a COAL of 2.780 for FMJ-BT) Shooting from a Savage 10FP bolt action. Z
-
How to determine best reloaded round?
What are we talking about when you say "a solid rest"? Are we talking a bench sled here. Z
-
How to determine best reloaded round?
What is the best way to test various loads that I've made at the range? Shoot three rounds of each? What distance should I be at? Should I pick up a set of shooting bags? Z
-
OT: Port O John rental $$
A little off topic, put all the places I called are closed for the weekend, and I'm looking to get a rough price. Anyone know how much it is to rent a Port o John per month? per year? Z
-
Another jammed 223 Case.
maks, Try the Lee lube, I've had some pretty tight .308 cases and no problems. .223 are a walk in the park. Z
-
Mil brass snug in chamber
Lee Dies? Yes Are you lubricating the case mouth properly? Dipping the case mouth in mica and lubing the body with Lee resizing lube Just as a side note: 1) I did notice the mil brass is a little tighter when resizing on the Lee dies. (little extra umph needed to press the handle down and up) 2 I also ordered a Case Length Headspace Gage. Hopefully this will show me where the issue is. Since the diameter of the casing seems ok, since it slides into the chamber with no issues, I'm thinking the length between the shoulder and headspace is not right like blackfox listed. Z
-
Mil brass snug in chamber
Grrrr...... :doh: Tips like this kill me. I got home and the first thing I did was lube a (FL sized) case and ran it through the FL die a second time and the issue is no more I think I'm going to try the small base die and dump it in the 4th (or 1st depending on how you look at it) hole on the turret next time I place an order. Z
-
Mil brass snug in chamber
By full rotation you mean the arm is actually hitting the stops at the same time the die is hitting the shell holder? Someone recommended running the mil brass (only once) through a small base die: http://www.midwayusa.com/viewProduct/?productnumber=597261 Z
-
Painting Targets
Like Ray Ray said curb yellow. No problems at 200 yrds: Z
-
Mil brass snug in chamber
I've been having a slight issue with .308 mil brass since I started reloading. When I chamber (just the case) the bolt does not fall as easy as it does on commercial brass. I triple checked the trim to length = 2.005". I wanted to see were the snugness was so I chambered a case and moved the bolt up and down. The only place I saw a rub was on the headstamp. The casing slips right in, it's just snug when pulling the bolt down. I do a full resize on the mil brass. Rifle is a Savage FP10 bolt action. Any ideas? Z
-
Carbon build up
S&W 686 6" 7 shot: Mostly in each chamber of the revolver, where the brass casing and bullet meet. S&W 15-22: The whole area around the ramp, the extractor, etc. Most of it cleans of with ease, but there are always problem areas with caked on carbon. I didn't get to the 15-22 yet, but once I wipe it down the ramp will be caked with carbon. Z
-
Carbon build up
I usually clean my guns a day or two after the range, but this time I let it slide and went two trips without cleaning. In the past I used the Otis cleaning kit with Hoppes Elite Gun Cleaner (spray) and that worked out but the carbon is pretty build up now and a PITA to get off. There has to be an easier solution that breaks this stuff down. The Hoppes Elite is like Windex, should I pick up a bottle of #9? Z
-
Reloading Cost?
With the Lee I'm doing: Pistol .38 Spl .357 Mag .40 S&W Rifle .223 Rem .308 Win Z
-
Reloading Cost?
http://www.njgunforums.com/forums/viewtopic.php?f=22&t=6699
-
Just joined Fort Dix...
I don't know the details but right in the middle of shooting a SUV comes coasting down the side road next to table 15, and pulls in front of the office, like nothing happened. By the time the RO noticed and called an immediate cease fire the truck was off the range. I think everyone stopped firing as soon as they saw the SUV anyway, and were in awe at the stupidity. It almost seemed like they were lost and trying to get to Range 14??????? Z
-
Just joined Fort Dix...
Anyone happen to be there Sat around 10AM-11AM and see a civilian SUV drive from the back to front (road on right) during live fire? Z
-
Higher load or different bullet
Steel Plate 9"x10.5" 3/8" thick 200 yards So I've been reloading for the past week, and this is my second time out with some reloads (.223/.308/.357 Mag). All the loads I've made I just stuck with the min charge in order to get the process down. My bro-in-law made this steel plate that hangs from a metal sign frame (like those open house frames). The 3 holes that went through are Ultramax .308 Win 165gr Soft point from Dicks, the other 7 indents are from my reloads .308 Sierra MK 168GR HPBT w/ 38.8 gr of RE-15, and lastly the other black circles you see are from .22LR (S&W MP 15-22) which just took the paint off. For the next time I'm going to make 4 new loads of five, each set with +.5 more grains then the last (39.3, 39.8, 40.3, and 40.8). What is the biggest cause of the reloads not piercing the plate? Left-Ultramax Right-Sierra reload Z
-
Primer pocket
maks, Do you tumble your brass after you deprime? I tumble, then deprime/resize. I don't think it matters in the long run, but man, that pocket is clean.... Mine looks like this: Z
-
Primer pocket
Wow how do I get my primer pocket this clean on fired brass? Z
-
Brass for .308
Learn something new everyday. THANKS!!! I have only have 3 type right now: PMC R-P LC What is the general rule to tell if it's military brass? (I thought the crimp was one) Z
-
Brass for .308
Pros/cons of this place? Recommended on another site. I was thinking of picking up some prepared brass. 250/$65 http://precisionbrass.net/308.html Z
-
Any place in Central NJ stock Federal Bulk value packs?
I was in the same boat as you about a month ago and went on a search one weekend. I had just picked up a conversion kit for an AR-15 and a S&W MP 15-22 and the Federal was the recommended ammo. I went to: Firearms Guide in Rahway Effing something in Bound Brook Dicks in Woodbridge Dicks in Freehold 3 Walmarts in PA Finally I picked up two boxes from maks, to try, then ordered 5 bulk packs from here: http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?id=0065915216951a&navCount=3&podId=0065915&parentId=cat604023&masterpathid=&navAction=jump&cmCat=MainCatcat20712-cat20726-cat604023&catalogCode=IA&rid=&parentType=index&indexId=cat604023&hasJS=true No tax, and at the time there was a free shipping code that maksim posted. Z
-
Diary of a Newbie Reloader II
Updated first post with new pics. Tested out 10 - .308 rds and 10 - .223 rds and checked each one as they came out. I didn't see any issues but I leave that to the experts here: No cracks or buldges on the case, area around the primers all look good.
-
Reloading shotshells whats wrong with this pic?
I will double check the next time I see him, but compared to the factory Remington Gun Club loads his loads seemed lighter. I know he used the recipe off Alliants site for 1 1/8 shot with Red Dot powder. Z