Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

zeenon

Members
  • Joined

  • Last visited

Everything posted by zeenon

  1. My brother in law started reloading shotshells with #8 and the lee slugs. Turned out pretty good for the 50 that we fired off, but I noticed on the wads I picked up from the shot, there was an indentation of the birdshot on the bottom...makes sense. What I don't understand, is how did the wad get indentations on the OUTSIDE of the petals??? (The inside is completely smooth except for the bottom) Z
  2. GOOD INFO, so 125gr bullets are out of the question when used with Blue Dot. I'll go with the 158gr, still interested if anyone has the Hornady info for a 158gr bullet. I'd like to know if the data matches the Sierra book or Lyman book more. Z
  3. Hmmm, anyone have the Hornady "Handbook of Cartridge Reloading: 7th Edition" Reloading Manual? I'm curious what that says? I might pick this one up also next time I order some stuff. Z
  4. So I'm looking to reload a box or two of .357 for my wifes S&W 686. Nice thing is (at least in my mind) the bullets I get can be used in .38 special brass also. So I go hunting online for some Sierra 125 gr JHC/JHP with no luck, so I pull out the Lyman book (now I know why you buy a few) to see if I can try out another brand. Same primers CCI 550 ok Same powder Blue Dot ok But the Sierra book lists 14.4 gr @ 1400 fps and I can go higher(Sierra bullets), the Lyman lists 13.3 gr @ 1402 AS THE MAX LOAD (Hornady bullets). The OAL is .005 diff. So if I loaded 14 gr I would be well over the max load according to the Lyman book. Why is that? Z
  5. Chris, Where you at table 12? I just saw this post now. We where at #11 till about noon then went over to shoot skeet. Z
  6. One more that I forgot to ask. I've been using the Full Length Sizer on all of the .223 and .308 cases, when do you use the Collet Neck Sizer die? (Can only use one or the other since they both have a decapping pin.) The deluxe Rifle die set comes with both. Z
  7. Two questions: 1) On the case length, what is an acceptable +/-? 1/100? 1/1000? Ex. If the trim to length is 2.005 (.308 Win), is that 100% the length? Or is +/- 2/1000 ok? 2) Same with powder. If the recipe calls for 38.8 +/- 1/10 of a gr ok? (I see a powder trickler in my future) Z
  8. Lee Classic 4 Hole Turret Press Lee 4 Hole Turrets (optional, get one turret for each die set you buy, trust me)* Lee Safety Primer Feeder (Small and Larger) Lee Auto Disk Powder Measure Double Disk Kit Lee Pro Auto-Disk Powder Measure Lee Primer Pocket Cleaner Lee Auto Disk Powder Measure Riser Lee Auto-Disk Rifle Powder Charging Die You will need a set for EACH rifle or pistol you want to reload: Lee Deluxe 3-Die Set XXXXX (insert rifle cal) Lee Deluxe Carbide 4-Die Set XXXXX (insert pistol cal) Lee Case Length Gage and shellholder XXXXXXX (insert cal) Lee Case Trimmer Cutter and Lock Stud (The jury is still out on this, this is by far the part that took the longest) Lee Chamfer and Deburring Tool Lyman Reloading Hankbook 49th Edition Sierra 5th Edition Reloading manual ABC's of Reloading 7th Edition Cabela's Rotary sifter Cabela's Vibratory Case Tumbler Cabela's 6 Lbs Corn Media w/ 8 oz Brass polish RCBS RangeMaster 750 Powder Scale Caliper RCBS bullet puller Lee resize lube *I need some guidance on this one, Lee makes a 3 turret and 4 turret disk. When you reload for rifle you only use 3 dies (at least for .223/.308). Pistol uses all 4 positions (the 4th crimps the bullet). So, when you are reloading rifle cal. you pull an extra time to skip the blank. Can you use the 3 hole turrets? Z
  9. So, after a long conversation last month at FD, maks gave me the bug to reload. So after buy all the necessary items and reading manual after manual, I was off: Setting up the press was pretty simple, but be prepared to read the directions at least 3 times. Maybe because it was my first time, but Lee needs to come up with a better manual. I used the following process: 1) Sort & inspect the cases 2) Tumble cases 3) Lube cases 4) Size & decap cases 5) Delube the cases 6) Clean the primer pocket 7) Trim to length and size with caliper 8) Debur/Chamfer 9) Seat the primer 10) Drop the powder 11) Seat the bullet 12) Check COAL on finished bullet 1) Sort and inspect the cases. No reason to tumble a case that is bad (and in my case crimped) 2) Tumble cases I order the Cabela's tumbler and sifter. I dumped about 3 capfuls of polish into the tumbler with the media and let it run for about 15 minutes to get rid of the clumps. I threw in about 3 handfuls of .223 and about 1 1/2 old drier sheets cut to 2"x2". The tumbler can take way more then that but I figure I'd start off slow. Clean brass 3) Lube cases I use the Lyman case neck cleaner and lubricator. Push the case on/off and dip the neck in the mica. I squeeze a little lube out on the edge of the table for roughly 50 cases, and apply a light coating to the case, avoiding the neck and shoulder. 4)Size & decap cases Case is ready to be decaped and sized. You can see the mica around the neck area and barely see the lube on the casing. 5) Delube the cases 6) Clean the primer pocket As I'm wiping off the lube, I'm cleaning the primer pocket. Update: I wasn't to impressed with the Lee primer pocket cleaner so I picked up the RCBS cleaner. I think it works better then the Lee, but the brush wires tend to bend if your not careful. A suggestion I saw, was to use the nylon brush dremel makes, attached to a variable speed drill/dremel. Seems you can clean out the pockets as fast as you can touch them on the brush. 7) Trim to length and size with caliper I originally bought the Lee case sizers and quickly realized it would take FOREVER doing it by hand: I quickly moved up to the Forster Original Case trimmer. I think this is one of those must have tools if you'll be doing a lot of trimming. I added a small plastic case, I had laying around, to keep the brass shavings from going all over. I'll update these later this week. 8) Debur/Chamfer 9) Seat the primer 10) Drop the powder 11) Seat the bullet 12) Check COAL on finished bullet Everything looked ok so I'm hoping Maks and Tim make it on tonight and let me know if I screwed up any place. I followed the Sierra manual and only made about 10 rds with the min charge: 20.1 Reloder 7 55 gr. FMJ 2.250 COAL Z
  10. The wife and I took that course about 3 months ago and it really is worth it to get a firm base to build and learn off. If I remember it was 3 hrs of classroom and 1 hr across the street at the range. Of course Anthony neglects to mention in his course that shooting is like crack.......because what started out as just a Glock 23 has turned into, a Glock 23 (.40) with a 9mm and .22 conversion kit, a S&W 6" 686, a Remington 870 Express, a S&W MP AR-15 (.223) with a .22 conversion kit, a S&W 15-22, and lastly a Savage FP 10 .308. ...now it's time to learn how to reload..... There you go Anthony, new course.....How to reload using the Lee Classic Turret. Z
  11. Darn, should have taken a screen shot and posted it last night. Someone must have gotten there panties in a wad because it's no longer available this morning when I went to show some people. Z
  12. Unfortunately there is a blurb on the coupon that excludes the 15-22 from this deal. Z
  13. AWESOME time today wish I could have stayed longer What Sierra book did you guys say to pick up? This one: http://www.midwayusa.com/viewproduct/?productnumber=946494 Z
  14. I'll be there with the Savage .308 Chris wants to knock off a couple traps, so I'll be there in the morning first. Z
  15. Take maksims advice, I asked the same questions and look what I got: Nikon 3x9x40mm Clone BUIS from rrages.com (of course I had to have BUIS) Magpul XTM TMS bipod with sling adapter (amazon.com) Hogue rubber grip Butler creek scope caps Z
  16. Like the subject says. I'm thinking this is a non crimped: Z
  17. Folks, For those thinking of going to FD this weekend (20th/21st) call up the office before heading out. Storms knocked out the electricity over the weekend and as of Wed no power which means no lights. I went today and was only able to shoot for about 45 minutes before they closed shop @ 6PM. No water, no electricity, no lights, and no skeet/trap. The storm even damaged a few of the trap/skeet ranges. Z
  18. Very cool!!! So cool I needed my own copy: http://ia360606.us.archive.org/2/items/DaPam750-30/M16a1-ComicBook-MaintenanceManual.pdf Z
  19. My bother in law wants to get this for his shotgun, but I know zip about shotgun laws. http://www.cheaperthandirt.com/ItemDetail.aspx?sku=SHT-016 If this was a AR it would have to be pinned, how about for a shotgun? Z
  20. zeenon replied to zeenon's topic in Rifles
    maksim, What do you have on yours? I like the pic rail with the warne rings, but Warne makes a low, med, high, extra high set. I'm guessing I need the one rail with med rings for the 50mm obj. Z
  21. zeenon replied to zeenon's topic in Rifles
    Ok, so it looks like I might be picking up a Savage 10 FP in the future. Starting to put all the parts together and I don't know what base/rings to get? I have a Nikon Monarch 6-24x50SF that I'll throw on it. I was looking at either: The one piece DNZ mounts: http://www.dnzproducts.com/index.php?main_page=product_info&cPath=66_6&products_id=49&zenid=m3sbshb5qe3j7tvgpu36an2g47 or A picatinny rail: http://www.midwayusa.com/viewproduct/?productnumber=889209 and 1" rings: http://www.midwayusa.com/viewproduct/?productnumber=918191 Any suggestions? Should I get the low or med? Z
  22. Hodgie, What are the fee's when buying a gun out of state? Shipping. (Free from Bud's) NICS check. $40 (I thought) Transfer fee???? Z
  23. Anyone ever buy from here: https://www.budsgunshop.com/catalog/product_info.php/products_id/78301 Looks like ~$640 with the NICS fee. Z
  24. For those with the Savage 10FP, 1) What did you pay for it? (stock) 2) Chad, what bipod is that in your pics? 3) I'm right handed, but shoot rifles leftie (left eye dom). I was thinking about getting the regular version (Right). Is there any disadvantage? (My rem shotgun, ar-15, and ar-15-22 are all right handed and I have no issues) I don't want to get a right handed version and find out the bolt is on my cheek. Z
  25. Are we talking the actually flying or the gun part? Anything like a guns, fireworks, etc. is prohibited by the AMA. The AMA is like the NRA for guns...provides insurance, FAA rights, etc. Like in any sport there always has to be a yahoo to ruin it with bottle rockets and guns.... :snooty:

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.