Everything posted by Pizza Bob
-
Old Bridge USPSA 3-24-13
Easton Monster IDPA match - walk-on. 12 stages, 18 rounds each = 216 total rounf count.
-
Someone stole a box of ammo of my porch, I'm gonna get them.
I was trying to figure out what a remanufactured UPS driver looked like
- Anyone have a "Safe Room", and wants to admit it?
-
EFGA - IDPA 3/24
Just looked at the calendar. I think that you are GTG for the rifle range on Saturday. It says the set-up is on the Special Events range, which are the pits beyond the, normally closed, gate. The IDPA match on Sunday will co-opt the Special Events Range, the Rifle Range and the single pit that is below the rifle range - so only thing available on Sunday - to non match shooters - will be the rimfire range and the handgun range. Have fun. Adios, Pizza Bob
-
The Great Shongum Revolver Extravaganza / Reg now OPEN
Well, that sucks!
- Anyone have a "Safe Room", and wants to admit it?
-
Punxatawney Phil facing the death penalty
I knocked-off quite a few of Phil's relatives in Central PA. Didn't seem to help. I figure his accuracy is about the same as any of the meteorologists we see in the MSM. Adios, PIzza Bob
-
I Disagree With the FAQ - Please Correct Me.
This may apply: 2C:39-9h.Large capacity ammunition magazines. Any person who manufactures, causes to be manufactured, transports, ships, sells or disposes of a large capacity ammunition magazine which is intended to be used for any purpose other than for authorized military or law enforcement purposes by duly authorized military or law enforcement personnel is guilty of a crime of the fourth degree. Just sayin' Adios, Pizza Bob
-
A4001: Requires firearms endorsement on DL IDs *UPDATED*
Yeah, I suggest a yellow star. Assholes
-
Suggestions on a new .45 ACP handgun?
Just have to be diligent and keep searching. LGS's (I'm sure one of our sponsoring dealers would be glad to order it for you, just no telling when you would have it), if you are close enough, stores in Eastern PA, gun shows, gun broker. Oak Hill Enterprises in Ulster, PA (sells a lot on Guns America - also have a website) gets a lot of "special" Smiths in stock. Don't forget that there are currently two models - the JM and the PC, but there are other variations that were made in the past that you may find used. Good luck. Adios, PIzza Bob
-
New Permit in - 45acp or .357?
No - in either revolver you shouldn't exceed SAAMI specs for the .357 cartridge. What you say may seem logical - but consider that with the bolt notch sitting directly on the chamber, the wall thickness may be the same or less than the 686+, with the bolt notch between the chambers. Last year on another forum, there was a picture of a GP100 KB (factory ammo). The failure point was the bolt notch. Adios, Pizza Bob
-
Cameras at ranges... why are they not allowed?
I gotta call BS on this (I don't doubt this waht they told you). TM may forbid you from leaving the store as a matter of convenience for them, but nothing from the PASP - the administrators of the PICS system. Are you supposed to camp out if you get put in "Research" for up to 15 days? Adios, Pizza Bob
-
New Permit in - 45acp or .357?
Yeah, but it was better than the sling my father had to use.
-
EFGA - IDPA 3/24
That would be after this match
-
EFGA - IDPA 3/24
This Sunday is EFGA's first IDPA shoot of the year. This is a walk-on shoot - no pre-registration necessary. They usually run 6 - 8 stages. Bring 150 rounds to be safe. Hope to see you there. Adios, Pizza Bob ADDENDUM: Just found out that this is a special match and they are saying round count is 216 - truly amazing for an IDPA match. So this is a minimum of 12 stages. This one may kill me, but what a way to go. Easton info here... http://www.nepaidpascores.net/efga/efga_club_master.html
- Suggestions on a new .45 ACP handgun?
-
New Permit in - 45acp or .357?
Thanks guys. Dang young whippersnapper. I was shooting wheelguns before he was a gleam in his daddy's eyes. Adios, Pizza Bob
- NICS checks
- Suggestions on a new .45 ACP handgun?
-
NICS checks
I think there are several threads on this already. NJ is a POC (Point of Contact) state. Dealers used to use a (900) number to call in, and were charged $15 for each call on their bill. As I understand it, the state did away with the 900 number and changed it to a toll free, without adequately notifying the dealers. This is the fuzzy part - not sure how we got from being able to phone in the NICS check to the current FAX system. Previously the fax system had been used during peak periods when it was tough to get through on the phone. Now it is the only system. The faxes go to a private company in FL that bundles the NICS requests - by what crteria I don't know. They are then forwarded to the NJSP - again, by what method I am not sure. The NJSP then do the actual NICS check, accessing the FBI NICS database and other NJ databases. If approved the dealer is then called and given the approval over the phone. Makes no sense to me, but it may be a prelude to this FL company creating an e-check system, which would hopefully, again, put the "instant" in NICS. Timeline for this transition is unknown - hopefully not like the restoration of the Essex Cty mental health records :wild: Adios, Pizza Bob
-
What the hell am I going to do with this???
Frank: If they are shooting for group, then this is something different than IBS Hunter BR - maybe an amalgam of HBR and another BR discipline. HBR is one shot each on five individual targets... ...and you are limited to a 6X scope and a total weight of 10# Being as you're lazy today, I'll save you the trouble... http://internationalbenchrest.com/about/whatis/disciplines.php Good luck and have fun. Adios, Pizza Bob
-
New Permit in - 45acp or .357?
I have, and, I repeat, all L-frame cylinders are 1.565" in diameter. The reason the kydex or poly holsters made for a 6-shot 686 do not fit the 7-shot 686 is because the cylinder flutes are in the wrong place - most plastic holsters, and well-boned leather ones also, are molded to the gun including into the flutes - if a flute isn't where it is supposed to be, guess what? The holster does not fit. Try using a caliper instead of a plastic holster. No offense, just trying to stop misinformation by gun store employees from getting out there. Adios, Pizza Bob
-
What the hell am I going to do with this???
Frank: You do know that HBR is not about shooting multiple rounds through the same hole, don't you? What scope is Sightron making for HBR now? And I love your confidence. Where do they contest Bench Rest in NJ? I used to shoot at Wally Hart's range (it was then, now owned by Palmisano & Pindel of .22PPC and 6mmPPC fame) back in the day - but never in any formal competitions. Sounds like you're going to have fun. Adios, Pizza Bob
-
New Permit in - 45acp or .357?
And that qualifies you as an expert how? The cylinder diameter of all L-frame guns is 1.565". To have it be otherwise would mean re-engineering and retooling in order to gain, maybe, several thousandths of an inch. If they changed the frame dimenions, the nomenclature would be changed - much like it was with their small framed guns, going from the I-frame to the J-frame to the magnum J-frame. Even saying that you have shot multiple 686's doesn'tmake your trigger observation valid either. I have a "few" S&W's and have shot a "few" more and even comparing identical models side by side there are variations in the quality of the triggers. Beyond the actual mechanical interfaces within the gun that affect trigger pull, you also have the human interface that can cause perceived differences in trigger quality. The same can be said of when the gun was manufactured - you will hear numerous S&W fans state that the triggers were better on the older guns. Too many variables to categorically state that he'll get a better trigger on the SSR than he would on a stock 686. NMHO - Fact Adios, PIzza Bob
-
Good Garand Bedding guy in NJ?
Absolutely - but with a specialization