Everything posted by Pizza Bob
-
Loaded mags in car...illegal?
No need to lock it in the trunk if it is knotted in the pantyhose.
-
In store check delays
NJ
-
Loaded mags in car...illegal?
Don't mean this to flame - but lets start with your original question about zippers. Yes, it would be considered a fastened case, why wouldn't it be? If they will accept a "securely tied package" why not a zippered case - you are overthinking this. The only mention of locks of any kind in the transport clause of 2C:39 is that of a the locked trunk of an automobile - and the inference there is that if it is carried in a locked trunk, there is no need for a case of any kind. Same applies for ammunition. Speaking to one legislator - unless they were the drafters of the bill - hardly constitutes knowing the "intent" of the law. Fairly obvious that it is intended to impede ready access, but your analogy to the a cooling off period (which PA hasn't used since the implementation of NICS/PICS in 1998) is a bit far reaching. There is no need for trigger locks for transport either. All the reiteration of these myths serves to do is to perpetuate non-existent "laws" and pave the way for them becoming the real thing. Adios, Pizza Bob
-
Selling a rifle to pa res.
You can hand carry the rifle to a PA FFL, meet your friend there, and have them do the transfer. Technically it could be transferred by a NJ FFL also, but in that case your PA buyer would need a NJ FPID. Simpler to go through the PA FFL. FTF interstate sales are prohibited by federal law. Adios, Pizza Bob
-
Ruger Mark I
I wouldn't just assume that it's a picky eater - likewise I'm not sure I'd go out and buy a thousand rounds of one brand or type. Find out what it likes, from both a functional and accuracy standpoint, before you stock-up on one particular type of ammo. If that is from 1951 (a very good year BTW), it may be a "Red Eagle" Ruger. Very desireable. Adios, Pizza Bob
-
Out & About / Handguns I've Found F/S @ PA Dealers
No, but IIRC, Tanner's (I think) had a used model 17
-
Someone In PA Who Can Make Mags NJ Legal
If they are going to be shipped anyway, just have them shipped to a NJ FFL, like Paul (PK90) to have the mags pinned. FFL's can lawfully accept items we mere peons are forbidden. Adios, Pizza Bob
-
Out & About / Handguns I've Found F/S @ PA Dealers
Almost forgot - Tanner's had a 686 SSR And I don't remember whether it was Tanner's or Surplus City, but one of them had a Pro Model 60
-
Wife gun... Choice Narrowed Down
<<Wife gun... Choice Narrowed Down>> I don't know - it would be close, but I think I'd go with the gun - far less trouble in the long run.
-
Out & About / Handguns I've Found F/S @ PA Dealers
Hey Bryan - I was so enamored of the 325TR at CP, that I forgot - they did have a 625JM in the case right next to it - have no idea of the price, but they don't gouge. Call them. Adios, Pizza Bob
-
Buying my first handgun
Mmmmm, could be because it was only an 8-round magazine? AFAIK, the P227 isn't out yet and any other Sig .45 would have a std mag capacity of a max 8-rounds. There are 10-rd P220 mags, but they extend well below the grip.
-
What would happen?
If he were a VA LEO, he'd be fine. If he is a VA citizen, he'd be spending the evening at the graybar hotel.
-
Sarco/PA purchase question
You should be GTG. Even though PA is a POC state, like NJ - unlike NJ they staff their NICS (PICS in PA) operation to meet demand. Should be able to bring it home with you. Might be a good idea to take your own COE's. Adios, Pizza Bob
-
Sig 220 stainless 45 thoughts?
Where did you ever get that idea? The Stainless Elite Carry uses the same full-size frame as the standard Stainless Elite. Only difference is barrel/slide length. Even if you were referring to the alloy framed guns, I'm not sure that you could characterize them as weaker than the stainless framed counterparts. Weaker how? Tensile strength? Hardness? To the OP, it the weight is a concern, you may be better off going to a full size alloy framed model than to the all-steel carry version - although, weightwise, it may six of one, half a dozen of the other. The benefit would be the longer sight radius. Balance will be different also. Good luck with whatever you shoose. Hard to go wrong with a classic P-series Sig - just ask me, I have a few Adios, Pizza Bob
-
Out & About / Handguns I've Found F/S @ PA Dealers
Ahhhh, maybe I was saving the revolvers for myself OK, here goes, but I can't remember pricing. Surplus City: Can't figure out why this one hasn't sold - it's been there for awhile - a MagnaPorted 2.5" - 3" model 629 for $650. Looks a little rough, but should clean-up. Haven't handled it, so maybe there are issues. Classic Pistol: Had two N-frame lightweights. A 325TR and a 327 TRR8, both in the $1100 range. Also had two model 18's - one with Magna grips and one with targets - not sure whether these were new or used. Tanners: They were loaded with used Colts. An Anaconda @ appx $1.9K, several Pythons in the $1.6K range and a King Cobra - don't remember price (hey, it's a Colt - who cares?). Also had a used S&W model 18. Nothing else really noteworthy. Happy now? Adios, Pizza Bob
-
Three gun in new jersey
Not in NJ, but I believe that both Topton and York (in PA) are only doing three-gun this year.
-
Lighten DA pull on 686
Apex hammer is fine in IDPA - it is part of the DAO conversion, which is allowed. Also, you can disable/remove the Clinton lock if you so desire. Adios, Pizza Bob
-
.22 revolvers
The 63 is a stainless J-frame and the K-22 (Model 17) is a blued K-frame. Both in .22 LR
-
Out & About / Handguns I've Found F/S @ PA Dealers
Just in case anyone is interested: Surplus City and Classic Pistol: Each had a S&W Pro Series 1911 in 9mm w/adjustable sights. Appx $1350 Tanners: Had the same with fixed sights. Appx. $1300 Classic Pistol: Had three Walther PPQ's two Gen I and one Gen II, all in .40 S&W. $549 for Gen I's and $589 for the Gen II. Dropped off papers for a couple of P2P's. New detective, nice guy, told me the state has been slow on the SBI 212A's. He sent some the middle of January that he had not received back yet. This township is very good to deal with, so I doubt this was BS. Adios, Pizza Bob
-
Lighten DA pull on 686
Henry makes a good point. Is your FP frame or hammer mounted? (You didn't specify what engineering change 686 you have so it could be either). My 625 has a frame mounted competition FP & spring, my 646 has the OE frame mounted FP. I don't think light strikes (assuming the mainspring is GTG) has ever been a problem with hammer mounted FP's. Start with the Wolff kit and go from there. Sooooo, Phillipsburg???? Adios, Pizza Bob
-
165 gr versus 180gr - what's the difference besides 15?
From Federal's website... AE40N1 40 S&W 180 1000 TMJ American Eagle® IRT AE40R1 40 S&W 180 1000 Full Metal Jacket American Eagle® AE40R2 40 S&W 155 1160 Full Metal Jacket American Eagle® AE40R3 40 S&W 165 1130 Full Metal Jacket American Eagle® It would appear that it is 30 FPS per bullet weight increment, in this example.
-
UPS Store will NOT ship firearms or loaded ammo!!
They want it in their system the least amount of time, thus less exposure to potential theft.
-
165 gr versus 180gr - what's the difference besides 15?
The .40 S&W cartridge is an offshoot in the development of the 10 mm. IIRC, this was done at the behest of the FBI, who were going to adopt the 10 mm as their new duty round, but found that the guns chambered for it had large grips that were difficult for shooters of small stature to handle. That and the fact that the recoil was pretty stout, which made for difficult shot-to-shot recovery. They first attempted a lighter loading of the standard 10 mm round, but malfunctions increased. So they took the 10 mm and shortened it by 3 mm, and named it the .40 S&W (and no, it does not stand for Short & Wimpy). The common bullet in the 10 mm was 180 grains and that just carried over to the .40. 180 was the standard loading for quite a while, and a lot of .40 S&W firearms produced today still have their sights regulated at the factory with 180 gr ammo. Just as with any caliber, the longer it exists the more experimentation with it there is and the more bullet weights for a given caliber are developed. Having a variety always gives the shooter the choice between light bullets at higher velocities, or large bullets at lower velocities - and the argument over which is better is akin to a Chevy vs. Ford argument. Adios, Pizza Bob
- Crimping a 45 acp
-
UPS Store will NOT ship firearms or loaded ammo!!
Yes, you must declare and have no indication on the outside of the package what it contains. UPS stores (most of which are franchise operations) are not allowed to accept firearms for shipping. You must take them to a UPS Hub. Done it many times. Adios, PIzza Bob