Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. Note that he said technically. With a greater mass at the rear of the bullet (due to the hollowpoint), it is better stabilized, thus technically, more accurate. Point of fact is that most .22 rimfires tend to have preferences for particular ammunition. You may find that your loves Remington gold palted bullets, while others castigate them as junk. You really need to some trials with any rimfire to find out what it shoots best, from both a functionality standpoint and an accuracy standpoint. Adios, Pizza Bob
  2. I think that you need to make a distinction in the above posts as to whether you are talking about a taper crimp or a roll crimp. Rimless cartridges to be used in semi-autos should always be taper crimped as, theoretically, the round headspaces on the case mouth (point of fact - they usually headspace off the extractor). Rimmed cartridges, for use in revolvers, should be roll crimped. Cartridges that use large amounts of slower burning powders (read that: magnums) should be heavily roll crimped. Lunker, I never found it necessary to roll crimp .45 ACP ammo that I used in my model 25. However, I had some loads for bowling pins that used a 250 gr LSWC, that I loaded in auto rim cases, and those I roll crimped. Adios, Pizza Bob
  3. Open Public Records Act... http://www.nj.gov/grc/public/citizens/
  4. You can try changing the the main spring and the rebound spring first and see where that takes you. Alec and I have both used a very accomplished revolver-smith and he uses the strain screw for the final fine-tuning. When DIY, I'd advise against playing with the strain screw - it should be tightened down all the way. Also realize that this is a committment to a competition gun. Once lightened, I would never depend on it for a HD/SD gun. You never know when that light-strike will occur. When it is tuned right to the edge of reliability, and then parts settle-in or wear - all of a sudden it goes bang, bang, click. In a match that's an "Oh shit" - in a defensive situation it can mean your life. If you hand load you can go pretty light, but you are then confined to Federal primers and "crush" seating them (.008" - .010" below flush). If you use factory ammo - again to get the lightest possible pull, you will be restricted to Federal ammunition. Just changing the springs may lighten up the pull enough that you are happy with it, but not sacrifice reliabilty with any ammo. Wolff makes a combo spring kit that has a reduced pull mainspring and three different weights of rebound springs. With a revolver it is a lot of trial and error and managing to "balance" all the components that affect trigger pull. Alec has played more with the innards of his guns than I have - anything beyond a spring change and mine goes to a smith, but that's just me - I am not a "handy" person. Good luck - it will be nice to have some more wheelgunners shooting IDPA. Phillipsburg is this coming Saturday. Great matches at that club. Usually 8 stages - 4 indoors and 4 outdoors with a commensurate round count. Extended forecast says 50's and partly cloudy - should be ideal if the weather is accurate. Come on out. Adios, Pizza Bob
  5. Troy frt & rear on one and Troy rear with MI front on the other. Both front sights are H&K style.
  6. Thanks Dave. Couldn't pass it up.
  7. Most of the answers above are correct. Not a bad idea to get an FPID, as you don't have to worry about travel exemptions with long guns - not to mention you may actually find something you want to buy in NJ. And, of course, it allows you to purchase handgun ammo - but as has been pointed out, you can bring it with you, purchase out of state (PA or DE are good) or go Internet (some Internet vendors do require you have an FPID). As for your AR's, they can be pretty easily made NJ compliant - grind off the bayonet lugs / pin the stock if it's collapsible (doesn't matter in which position you pin it) / and replace the flash hider with a comp that is permanently installed (pinned & welded). Save your money - hiring an attorney will get you nowhere - unless you plan to violate NJ law and are planning ahead, in which case you better be prepared to spend a whole lot more time in NJ than you ever anticipated. IDPA - believe it or not, there is a very active practical shooting community in NJ - both USPSA and IDPA. Since you ask specifically about the latter - South Jersey Shooting Club and Quinton Sportsman both have IDPA matches down in south Jersey. If you want to venture further afield, you have Somerset, NJ (indoor), Phillipsburg, NJ (combo in & out), Easton, PA (outdoor) and several other clubs. Central Jersey, that was spoken of above has USPSA - no IDPA there. Here's a website with competitions all over the area... http://www.nepaidpascores.net/ Just poke around a little, there is a wealth of information on that site. One last caveat, by the time you get here all of the information above, relative to NJ laws, may be moot. There are currently 20+ bills that have already passed the Assembly and roughly 20 more that either haven't yet been assigned to committee or are bottled up in committee, that drastically affect gun owners in the state of NJ. We have a very active grassroots organization (NJ2AS) that is fighting against these tooth & nail, so hopefully the status quo will be maintained. Could be worse - you could have been stationed in NYS, Any questions, feel free to either post here or PM me. Welcome to the gulag. Adios, Pizza Bob
  8. Lead is a cumulative poison. You have to build to certain levels in the body before there is any noted toxic effect. That is all well and good for adults, but the effects it can have on your unborn child may manifest at much lower levels. It sounds like you are taking intelligent precautions now, but I would suggest that instead of soliciting advice on a forum, that you should consult with your obstetrician. Congrats on your expected arrival. Adios, Pizza Bob
  9. Pizza Bob replied to Lecky's topic in Handguns
    Custom grips are custom so that they can express your taste, not a collective of the board's opinion. Determine what it is you want from the grips - functionality? Beauty? Maybe a combination of both? How is the gun to be used? A BBQ gun that will see very little actual use and primarily be a showpiece, or a functional tool - maybe hard-used in competition? Is concealed carry part of the gun's mission? All considerations in your choice of what grips you choose and what they say about the person that chose them. I value function, but I also value the aesthetics of the gun. On 3 of my 4 1911's I use G-10 grips for the beauty and functionality. Two of the guns wear VZ Aliens and the third wears a pair of Larry Davidson slim sunburst design grips. I like the choices I've made - how you feel about them really isn't that important to me - just as your choice should be yours alone. If you have some grips in mind, nothing wrong with soliciting opinions from the board, but that should only factor in as a minor part of your decision-making process. Good luck with whatever you choose. Adios, Pizza Bob
  10. Maybe you need to lurk awhile to "learn" how this board functions. Your posts in this thread bring nothing original to the table - all you do is quote and link. I'm sorry, this isn't a personal vendetta, but anyone can cut & paste or just include multiple links in a post. If you want to become a functional part of this forum, express your opinions and observations, write something that encompasses some original thought. Adios, Pizza Bob
  11. Thanks, but I know about those - below is from my post #64 in this thread...
  12. Is that a good WOW, Ray, or a bad one? With the face palm it could go either way. Figured this gun would be right up your alley.
  13. How quickly we forget. While S&W was guilty of buckling under to the Clintons, if Bill Ruger were still alive there would be no Ruger AR's and your mag capacity would be limited not by the physical size of the gun, but by Bill's whim. He was one much like Jauquin Jackson - same generation. I say this not to defame the name or company (Ruger or S&W) but simply to point out that things change, and given enough time, we tend to forgive most transgressions. BTW, it's Sturm, Ruger & Co. Inc. Adios, Pizza Bob
  14. All right, this has gotten tedious – not fun anymore. I really doubted that anyone would get this, unless they stumbled upon it, not because of superior S&W knowledge but due to lack of it – but no one has. S&W makes runs of what they call “Special Ordinance Orders” on contract for foreign or domestic police, military or security agencies. I am surmising that what I have is the result of one of these SOO’s. The gun is a model 586-4, but it is chambered in .38 Special – not .357 mag. The 4” barrel is rollmarked .38 S&W Special Ctg. If you look in the S&W Bible (Standard Catalog of Smith & Wesson) the only .38 Spl 586’s mentioned are from, what is known as, the Brazilian Contract. According to the book there were only 23 4” guns released to dealers in the US. This is NOT one of them. All of the Brazilian Contract guns were 586-5’s and had a unique serial number prefix. That begs the question, “What do I have?” Frankly, I don’t know. It is a shooter – there is no box or papers and it has been shot (not a lot – but shot). I’m really curious, just not $50 curious, as that is what it costs for the S&W historian (Roy Jinks) to “letter” the gun – giving you the manufacturing and shipping history. I’m assuming it was part of a SOO and that it was for export, or we’d see a lot more of these. I would also think that it was a fairly large production run as the serial number prefix is specific to one month and year (Nov 1997). Some European police agencies would not allow .357 magnums. The most popular police cartridge in Europe throughout the 70’s and 80’s (maybe before and after that, too) was the 9 mm Kurz – or the .380 ACP as we know it here. A .357 magnum would have been a huge leap in power, and I’m sure that in populous Europe they were afraid of over-penetration, so the .38 Special gained a lot of favor as a logical step up from .380. I’m just playing detective here. So a 586 chambered in .38 Special is a pretty rare bird, but not necessarily any more valuable. Some may actually look at the chambering as a detriment to value. As I said, I like oddball, not run-of-the-mill things, and this certainly fills the bill. I was actually able to purchase it for less than what a “normal” 586 would sell for, so I’m ahead of the game. It will make an ideal IDPA gun in SSR. While I like stainless, there is nothing like a nice blued revolver. This one is also desirable because it pre-dates the Clinton lock and has no MIM content. It was the first engineering change that includes the frame pre-tapped for an optic mount and has the new style rear sight. It will be, most likely 6 – 8 weeks before I will take possession, but when I do, I’ll post some pictures. The Smiths I have, for the large part, tend toward N-frames. This is only the second L-frame I’ll have and they are both pretty unique – the first being chambered for .40 S&W (model 646 – only 300 made). Sorry for torturing everyone – just thought it was unique and this game might grab your attention. Thanks for participating. Adios, Pizza Bob
  15. Is this a new game? What the heck is an M-frame????
  16. Yep, Moby Dick was a minnow
  17. Already submitted by Parker - see response there Very creative, but very wrong. Sorry. OK folks - NOT a J-frame
  18. Older than dirt
  19. Ah, yes - clear into another county
  20. Dave: Here is what negates that argument. If I have planned to kill as many people as possible, I will bring the instruments to accomplish that. For arguments sake, let's say that I, as the potential active shooter, actually obey the law and use only 10 round magazines - I will bring a shitload of them with me. This isn't hypothetical, both the Columbine shooters and Cho, at VA Tech, had multiple loaded 10-round magazines with them. With Cho I recall hearing he had 17 loaded mags in a backpack. If I am Joe Citizen, with my CCW, I may only have the mag that is in the gun - and yes it would be a law-abiding 10-rounder - or at most one or two spares. Granted, even with an 18 round mag, there is still a great disparity of force - but at least I'll get 18 tries at neutralizing the shooter, rather than the state-mandated 10. An offensive shooter will prepare with as many mags as they want, in order to perpetrate their evil A defensive shooter is limited by what they can comfortably carry and conceal and the state. Adios, Pizza Bob
  21. I like the way you think, but you're not there yet.
  22. Yeah, it's a relic - Manufactured in November 1997 - no lock, no MIM. @Parker - didn't necessarily mean that it's an N-Frame just that the Outdoorsman embodies the same philosophy. @Ray Ray - we've already ascertained that it's .38 Special in caliber, and eliminated the one .38 Spl semi-auto that S&W makes. It is a wheelgun and one you would like. Adios, Pizza Bob
  23. You were closer before

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.