Everything posted by Pizza Bob
-
Jackson Township limiting handgun permits
Any punitive measures taken by the PD because you tried to get them to comply with the law would be grounds for a 2C:30-2 Official Misconduct Complaint - file one of those and there will be no pushing. Adios, Pizza Bob
-
Jackson Township limiting handgun permits
Not only are there extensions - which in some (most?) jurisdictions is a simple matter, you also have exemptions for multiple purchases. They do not figure into the 30 days equation, but you do need a permit for each gun you wish to acquire. A number of people on this board have taken advantage of the multiple gun purchase exemption that was written into the OGAM statute. All of the above is moot due to the fact that local PD's are not allowed to limit the number of permits applied for - you do not need to justify your application. Adios, Pizza Bob
-
What is leagal barrel legnth for a shotgun in NJ?
Pistol grips on a S/A shotgun are a no-no in NJ. Also, slugs are a poor choice for HD with a shotgun. The overpenetration potential is just too high. Within the ranges encountered within your home, some type of multiple shotshell is best. The pattern will not expand enough that you should have to worry about collateral damage. Adios, Pizza Bob
-
Swat Called On Me Today....
You should at least file a complaint with the PD. Once they established your bona fides - which according to your chronology was before they took the serial numbers of your guns - they had no reasonable articulable suspicion to take your serial numbers. They trampled on your rights. Just sayin' Adios, Pizza Bob
-
A Journalist Who Understands / A voice of truth in a sea of hyperbole
You really had to look to find this article, but it is one of the best written, most insightful pieces of journalism that I have seen come out of this tragedy. As I read, I found that it mirrored my sentiments and put them into words so much better than I could have. Please read and see if you don't agree with the author... http://theweek.com/b...cticut-coverage Adios, Pizza Bob
-
Talk me into an AR
If you don't think there is a compelling enough reason to get one now, nothing we're going to say will persuade you.
-
Somerset IDPA / Start the new year right!
As Jon said, you do not need to attend the Wed night practice. The Wed night practice is restricted to SCFGPA members only. Whereas the Sunday match is open to anyone. There is always a new shooters briefing before the Sunday match. Read the stickies here and the rule book on the IDPA site to familiarize yourself with the equipment needed and gain a basic understanding. Adios, Pizza Bob
-
Somerset IDPA / Start the new year right!
For those that have expressed an interest in trying IDPA - or for those that are already hooked - here's the site to register for Somerset's (SCFGPA) January 20th match... http://www.somersetidpa.com/matches/ I am posting this now because this one fills up very quickly. I registered toady and there were already 8 people registered. Because of the venue, they limit participation to 30 people. This is an indoor (so weather is not a factor), 4-stage match. The MD and RSO's are very "newbie" friendly as is the crowd that regularly shoots there. So don't put it off - register now and discover how much fun action shooting is. You'll never want to just stand in one place and fire at a static target again. See you there. Adios, Pizza Bob
-
"American Guns" Cancelled
Holy cow, did you feel that disturbance in the force? Must be as a result of all those liberals knee-jerking.
-
Contacting employer...
Ohhhh, I see, the old "Pre-crime Unit" argument.
-
S & W 686 sight options
A tritium front sight is the place to start. Ultimately, you may want to replace the rear also. Dawson Precision makes a .230" high x .125" wide front sight for pinned in blades. Measure the height of your front sight to see if this will suffice. If you have a "Classic" or "DX" model 686, the front sight blade is easily changed. For a pinned-in blade a gunsmith will be required. I used to think night sights were the solution - now I'm not so sure that there is a problem. My thinking has changed somewhat to the employment of a good flashlight - remember you have to identify your target first, and you aren't going to do that by the glow of a tritium sight. Tru-Glo sights are an impressive idea (tritium vial behind a fiber optic rod), but I have heard and read reports that they don't hold up well - not the glow, just a general fragility. Fiber optics are great for competition in well lit environments - anything other than that, they are the same as a plain blade. JMHO Adios, Pizza Bob
-
School shooting in CT
While I gave up on the Lame Stream Media a long time ago, this incident just goes to show how truly bad they are. They have turned this horrific event into a three ring circus, reporting any rumor or innuendo with no basis in fact. Then several hours or days later, the story changes. For them it is all about ratings, and apparently they will do anything to come out on top. It disgusts me. I will give kudos to Lt. Paul Vance of the CTSP - he has handled himself professionally and with great decorum throughout. He releases information only when he knows that it is confirmed and the information comes by way of their investigation - not rumor and innuendo. The LSM may as well be playing "Whisper Down the Lane" (hope that reference doesn't escape the younger members). One thing I find interesting - in the LSM's rush to dance in the blood of the innocent victims and direct this to accommodate their own agenda, no one has mentioned the police response time. Not faulting them - it is what it is, and once they were on scene they immediately went into "Active Shooter" mode. Unfortunately, the ten minutes it took them to get there was more than enough time for the evil to manifest. If the response time does come up, you can count on some talking head to point out the use of semi-auto weapons and try to correlate that to the high number of rounds fired. Hell, I'm old, fat and slow and I hate to think how many rounds I could get off with a revolver in ten minutes - but the LSM never let facts deter them. Rant off. I can't even begin to feel the heartbreak that whole community is going through. My thoughts are with them. Adios, Pizza Bob
-
Recommendations on somewhere to fit new tires on LR2
Alex: If you are buying the tires on Tire Rack, they have a list of approved installers on their website. You can have your tires shipped directly to them and then just drop off your vehicle for the mount & balance. Adios, Pizza Bob
-
Contacting employer...
In light of the following from the NJAC, my opinion is no - they should not reveal what their inquiry is in reference to - but you know - opinions are like....... Any background investigation conducted by the chief of police, the Superintendent or the county prosecutor, of any applicant for a permit, firearms identification card license, or registration, in accordance with the requirements of this chapter, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such investigation, including the applicant. Any application for a permit, firearms identification card, or license, and any document reflecting the issuance or denial of such permit, firearms identification card, or license, and any permit, firearms identification card, license, certification, certificate, form of register, or registration statement, maintained by any State or municipal governmental agency, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such documentation, including the applicant, except on the request of persons acting in their governmental capacities for purposes of the administration of justice. Good luck. Adios, Pizza Bob
- Another upper thread...
-
Contacting employer...
You are correct. The Howell PD is in the wrong. Not uncommon, but wrong on so many levels.
-
Brakes that will accept suppressor
Hence the gray area that I pointed out in my post (#7).
-
TAVOR TAR-21 Rifle by IWI
IWI is getting in bed with the former owner of KBI, the importer of Charles Daly branded firearms. They were located in Harrisburg, as will be Tavor/IWI. Lets hope that this enterprise goes better than KBI (bankrupt in 2010). Adios, Pizza Bob
-
Menendez Senate Intern Arrested / Illegal Alien & Sex Offender
DHS now back pedaling furiously - AP reports that they were instructed to wait until after the election to effect the arrest. Here's the AP story... http://hosted.ap.org/dynamic/stories/U/US_SENATE_INTERN_ARRESTED?SITE=AP&SECTION=HOME&TEMPLATE=DEFAULT&CTIME=2012-12-12-14-18-16 Hey, it's New Jersey, what did you expect? Adios, Pizza Bob
-
Want to try IDPA- Which gun?
Depending upon weight, the Baby Eagle may put you in ESP also - but since you don't have three mags that point is moot. The RIA with the 9 mm barrel is your best bet. The "enhanced" in the ESP is basically because of the single action of the 1911 platform. Don't be intimidated. You'll meet some of the nicest people shooting IDPA. Holster has to cover the trigger guard and have no drop or offset. Must be worn on a belt that goes through the loops of your pants. AndyB on here may have a relatively inexpensive Blade-Tech Revolution holster for sale that would be just fine. You may want to PM him. Now as to where. There is a low light/no light match this Sunday at Somerset - but it is sold out. Somerset shoots the third Sunday of the month. Phillipsburg shoots the second Saturday of the month and that may be your best bet. Start practicing with that revolver - we could use a few wheelgunners. If you have any other questions, post em up. Adios, Pizza Bob Here is a great site to keep you informed as to upcoming matches. http://www.nepaidpascores.net/
-
do i need a new FOID
OK guys (dark hunter & blizzarddemon), you have sent me into research mode. Technically, your PD's are fine in not requiring the SP-212A, providing you have been previously fingerprinted and they do a thorough investigation. Here is how the law reads... 2C:58-3,e The chief police officer or the superintendent shall obtain the fingerprints of the applicant and shall have them compared with any and all records of fingerprints in the municipality and county in which the applicant resides and also the records of the State Bureau of Identification and the Federal Bureau of Investigation, provided that an applicant for a handgun purchase permit who possesses a valid firearms purchaser identification card, or who has previously obtained a handgun purchase permit from the same licensing authority for which he was previously fingerprinted, and who provides other reasonably satisfactory proof of his identity, need not be fingerprinted again; however, the chief police officer or the superintendent shall proceed to investigate the application to determine whether or not the applicant has become subject to any of the disabilities set forth in this chapter. The requirement shown in red above is generally satisfied by the use of SP-212A throughout most of the rest of the state. If you became a prohibited person and your PD didn't catch it because they failed to do a complete investigation (read that: SP-212A), they open themselves and the municpality up to some major liability. You guys are among the fortunate ones - less paperwork, hassle and expense than what the rest of us go through. Adios, PIzza Bob
-
Brakes that will accept suppressor
Getting back to the OP's question: Real gray area. The brake must be permanently affixed to the barrel - thus it becomes part of the barrel. If it, in turn, is threaded, you are back to a "threadede barrel" thus a disqualifying feature on an AR (assuming pistol grip.) I say gray, because the evil features list is in the AC and not the statutes. It is intended to define "substantially identical". The language use in the AC say that a barrel threaded to accept a flash suppressor is the evil feature. If there are no flash suppressors made that fit the external thread used on brakes to accept a sound suppressor, you might technically be in the clear. That's an awful fine distinction to be betting your freedom on. I think it simply becomes: Threaded barrel = evil feature - regardless of what it is intended to accept. Adios, Pizza Bob
-
My S&W Model 28-2.
I bought a used 4" model 28 in 1973 for $125. I bought a 6" model 24 barrel (.44 Spl) and sent them off to a gunsmith named George Matthews (who still comes up with a Google search) in Downey, CA and had him do the conversion to .44 special. He also changed the front patridge sight (on the 24 barrel) to a Baughman ramp with a gold insert (should have left it a patridge). Here's what it looks like today... Enjoy yours - there is nothing quite like an N-frame Smith. Adios, Pizza Bob
-
do i need a new FOID
Shhhhh! Then they are breaking the law.....but this time it's in our favor
-
Florida CCW
Sounds like a straw purchase - you, a prohibited person, since you are not a FL resident - have someone purchase the gun for you. That's a federal no-no. Adios, Pizza Bob