Everything posted by Pizza Bob
-
357 sig
Vaporware = A product that is introduced and hyped via the Internet (and other media) but does not exist in production form.
-
357 sig
I'll repeat myself (see post #6) - the Sig Nightmare, even though it's shown on their website, is vaporware.
-
Brand New Kimber Team Match II but some issues: MINUS 1 for Kimber
Not familiar with the term Nick? Comes from the old Andy Griffith Show and the fact that Barney Fife was only allowed to have one bullet. When you are competing, or just shooting, and you want your gun loaded to maximum capacity - you charge the gun first from the "Barney" mag - chambering one round. Then drop the Barney mag and insert a fully loaded mag. Heard must often in reference to 1911 .45's, where you want to have the gun loaded with 9 rounds. I use an older 7-round mag as my Barney, and then insert a fully loaded 8-round mag. With my 9mm 1911, I use the 9-round mag that came with the gun as the Barney and then use a 10-round Wilson to get 11 rounds. Adios, Pizza Bob
-
Akdal MKA 1919 in NJ!!
Really curious as to how you made out. Or, should we be taking up a collection for bail money?
-
357 sig
Sig does not make any of their steel classic P-series in .357 Sig anymore. They made an all stainless P229 Sport in that caliber some time ago, which you may be able to find in the secondary market and the P226 Stainless (not Elite) was also available in .357 Sig. The 1911 Nightmare Bobtail is vaporware at this point - another in a long line of Sig's famous Vapor line of firearms Being that the .357 Sig is pretty much strictly a SD caliber, it is generally more desireable in a lighter gun suitable for carry. Nothing wrong with an alloy frame. Good luck in your search. Adios, Pizza Bob
-
Brand New Kimber Team Match II but some issues: MINUS 1 for Kimber
Use it as a "Barney" mag
-
Question about keeping mags loaded.
Why? If the mags are just sitting there, what purpose is served by checking the ammo? Unloading and loading a magazine is what degrades the springs - being compressed does not. You are possibly creating problems where, if you left well enough alone, there would be none. Adios, Pizza Bob
-
Happy 30th Maks
Happy Birthday Maks.....sheesh, 30? Now I feel really old
-
NJ Energy Deregulation
They aren't scams, but there is no guarantee that they'll lower your costs either. They are, in essence, brokers trading futures. They buy a block of energy from a company like PSE&G or JCP&L (a pox on their house) with the hope that energy costs will go up and then they sell the block of energy that they own for somewhere between what they paid and the current price. The original provider is still responsible for the line maintenance etc. All the new "power" company is doing is acting as a broker. So for all of you out there that thought that you actually had a choice and that you could divest yourselves of the likes of a JCP&L - you're fooling yourselves. The money is still going into their pocket, you are just paying a middleman - who may or may not be able to save you money. Adios, Pizza Bob
-
FIRE AT DAN WESSON..
The "Dan Wesson" name was for the co-founder of Smith & Wesson. His great grandson, Daniel Wesson II, fouded Dan Wesson Arms. They made their name as a revolver manufactuerer in 1970's. The current owner of Fusion Firearms resurrected the brand and took it in a different direction by building 1911's. He was successful enough that he was able to sell the company to CZ, which owns the name currently. Adios, Pizza Bob
-
Akdal MKA 1919 in NJ!!
Nothing the ATF can do - this is a state beef.
- Aftermarket wood grips
-
Buying gun from florida $70 shipping sound right?
Absolutely. An individual (non-FFL) can ship a gun to an FFL, but they are restricted to using FedEx or UPS. You have to make sure that your FFL is OK receiving a gun from a non-FFL - not all are. If he is, he will most likely request a photocopy of some form of ID from the seller/shipper. Adios, Pizza Bob
-
Buying gun from florida $70 shipping sound right?
Furthermore, there is no law that says handguns must be shipped overnight. That is a company policy by both FedEx and UPS in order to have guns in their system the shortest amount of time, theoretically lessening the odds of internal theft. As lunker said, his FFL can ship it via USPS. I'd go priority or registered, fully insured with delivery confirmation and tracking. Usually comes out quite a bit cheaper. Good luck. Adios, Pizza Bob
-
Can't Stop Fiddling - S&W 646
Good luck with that. I stumbled upon this one in my search for a 610. Smith made a total of 700 .40 S&W L-frames. The first 400 were done in 2001 by the PC and had slab-sided barrels with short ejector rod housings. There were some issues with these guns. In 2003 S&W must have found the leftover titanium cylinders in .40 S&W in their warehouse. Smith is like an African tribe with an elephant - nothing goes to waste. Using the leftover cylinders, they did a second regular production run of 300 in the normal, full underlug, L-frame 4" configuration. Even though they were regular production, they were shipped in PC aluminum cases. My gun is part of that production. I occasionally see them offered on Gunbroker and the asking price, now, usually runs $1K - $1.2K. Not many .40 revolvers out there. Quality on the Charter Arms is hit or miss and they are snubbies anyway. The one that intrigues me is the Chiappa Rhino. The factory offers many accessories, including an action tune-up kit, kydex holsters etc. I look at them from a competition perspective and if they weren't so expensive ($800), I'd get one just to play with. Someone on the board has a Rhino, but IIRC, it is in .357 mag. I'm intrigued by the moonclip loaded pistol cartridge chamberings. Adios, Pizza Bob
-
Can't Stop Fiddling - S&W 646
That is the only way they were made. I understand that it is a cylinder wall thickness/strength issue. In order to get six .40 S&W rounds in a cylinder small enough for an L-frame, the wall thickness of the chambers is pretty thin. The strength of the titanium helps prevent KB's. Going up to Easton today to see where it's shooting with the new FO sight that Dave installed (not an easy installation). Adios, Pizza Bob
-
Can't Stop Fiddling - S&W 646
No Ray, it's an L-frame, which means a smaller cylinder diameter, which means thinner walls between chambers, which is why it has to be titanium to begin with. Would not stand up to 10 mm, you need an N-frame for that. Adios, PIzza Bob
-
Can't Stop Fiddling - S&W 646
While my 625PC is having magic worked upon it (probably won't be back until Jan/Feb), I have been fiddling with my other ESR division (IDPA) gun, the 646. Here it is in its latest iteration... I added a Dawson Precision .100" fiber optic front sight and Hogue rubber & wood Big Butt grips. These grips kind of force you into a high hold (a good thing) and give you something to wrap the little finger of your weak hand around. Adios, Pizza Bob
-
Sig P227 Announced
Don't be unwalleting your money just yet. While this sounds like it actually may happen, Sig is famous for premature announcements and long lead times 'til the product actually becomes available - if at all. I don't know how they have not figured out they are shooting themselves in the foot with this marketing strategy. They make the announcement and then can't supply product while interest and buying impulses are at their peak. Eventually, people lose interest or just get tired of waiting and buy something else. Then the product shows up and they can't figure out the lackluster sales performance. If it is set to debut at SHOT, that is already a three month lead. I would bet that June is the earliest (again I have to say, if ever) you'll see this. I think this has a better shot at making it to market than some of their past intros, since it is based on several existing products instead of being brand new. Good luck, but don't hold your breath. Adios, Pizza Bob
-
Revolver for HD
Nit-Pick police here. The 686 is built on the L-frame and the 617 is built on the K-frame. They both have the same grip frame size, but the K-frame is smaller. Controls and sight picture remain the same, but the 617 is smaller and lighter overall. Still a valid option for inexpensive practice. Enjoy. Adios, Pizza Bob
- Sig P227 Announced
-
Sig P228 VS P229
Are the "new" P228's still using the carbon steel slide. I was under the impression that they used the monolithic SS slide and were essentially 9mm P229's without the rail.
-
Here we go.. Assault Weapon Ban being resurrected?
As I recall, when NJ enacted their AWB in 1993 (which is what the federal ban was based on - Biden can never do anything original), there was no grandfathering and no compensation. Yes you could apply for a an AW license in a limited time frame and IIRC that was limited in scope also. It was pretty much "Sell it out of state or demil it". Has something changed (other than the amount of EBR's out there) since then? Adios, Pizza Bob
-
so does ANYONE store-wise take back or swap ammo ?
Too much liability for a retail establishment to accept returns. As was said, sell it on here.
-
Listing self-employed on PPP application
100% correct. This goes way beyond the scope of the application and as such is a violation of the statute. Employer information is for employment verification only, and is not to be treated as a reference. The NJAC quite clearly spells out the privacy considerations and your employer has no right to know that you are desirous of purchasing a firearm, let alone have a voice in your suitability. Adios, Pizza Bob