Everything posted by Pizza Bob
-
IDPA Somerset 8/19
You too? I just make sure that the RO yells "TIMBER" whenever I have to get down. See you there. Adios, Pizza Bob
-
Winchester White Box (Walmart Easton PA purchases) lengthy.
Duppie: If you haven't had any problems in 300 rounds shot thus far, it's doubtful that any will arise now. Don't let me dissuade you from buying a set of calipers, every shooter should have one. If the problems with this particular ammo were as bad as the OP makes it out to be, we would have heard more about this than a single post by an inexperienced (that's an understatement) shooter. Methinks there was more afoot here than was implied in the OP. Adios, Pizza Bob <----shooter of thousands of rounds of WWB w/nary a hiccup
-
Used Firearms Invoice/Receipt somewhere on this Forum ????
Attached is a blank Bill of Sale that I have used in the past. It's in MS Word format so just fill in the appropriate info and print out a copy for your self and one for the buyer. Owners manuals for most firearms can be found on line, so if I don't have the original, I download one from the net and print it out. Adios, Pizza Bob Bill of Sale - blank.doc
-
Anyone have suggestions on where to get gun hard chromed?
Does EGW do refinish work - thought they were pretty much concentrating on the manufacturing side of their business. Even if you have it done at EGW, is it done in-house or sent out? Here are a couple of suggestions: http://www.customizedcreationz.com/ http://www.robarguns.com/np3.htm Here's a fairly local one... http://eastonfirearmsrefinishing.com/ Good luck. Adios, Pizza Bob
-
Winchester White Box (Walmart Easton PA purchases) lengthy.
I can agree with what you say. I don't ever recall jumping on any new shooter, ever. Quite the opposite, I think I have been instrumental in helping any new shooter that knows enough to ask the question. That was the problem in this case - they didn't have the intelligence to ask the right questions - or at the very least, do nothing until they find a knowledgable source. What they did was so egregious that I don't think it can be stressed often enough. These are firearms. They have the potential to maim or kill someone. They need to be kept under your direct control. It doesn't get much simpler than that. They demonstrated that they are too immature to own a gun. I'm done. Adios, Pizza Bob
-
Best way to remove bluing?
Never tried this, but we keep hearing warnings about never using a Lead-Away cloth on blued guns as it removes the bluing - just a thought. However, what gun is this? So few pistols are actually blued these days that you may have a hard time with any chemical removal method. Trying to think of what guns are still actually blued - revolvers come to mind (naturally) and some 1911's. Most of the plastic fantastic crowd have some sort of gee-whiz miracle finish on them. Just know what you're getting into before you start. Good luck. Adios, Pizza Bob
-
Winchester White Box (Walmart Easton PA purchases) lengthy.
That's not a bad idea. We need to police our own ranks. I can understand a new shooter faux pas like breaking the 180 or reloading with your finger in the trigger, or even sweeping someone next to you (once), but this was so blatant and so stupid that this person (people) needs to be culled from our ranks lest he reflect badly on all shooters in general and NJ shooters in particular. This incident shows such poor judgement and immaturity that I never want to be on the same range with them. I totally fail to understand how they came to the conclusion that throwing a gun - not once, but three or more times - over a wall, was a "safe" endeavor. This action is indefensible. JM (not so) HO Adios, Pizza Bob
-
Winchester White Box (Walmart Easton PA purchases) lengthy.
Once was a mistake (and still one time too many). Three times is sheer idiocy. What they did violates every tenent of safe gun handling - the foundation of our sport. I stand by my original statement - they should never be allowed to touch a gun again. To the OP - if the slide was in battery, why not just pull the trigger? Obviously it wasn't, and you couldn't - that is what a disconnector is for and was your clue to box it up and take it to a qualified person to remedy. Adios, Pizza Bob
-
Winchester White Box (Walmart Easton PA purchases) lengthy.
Seriously - I'm with Old School - you should never be allowed to touch another firearm!
-
crud out of Blazer .38 Special?
Probably just unburnt powder. You are shooting it out of a short barreled revolver - some escapes through the B/C gap and with the short barrel there is not enough time to burn it all completely. That's another advantage of handloading. You can tailor the powder used to the firearm. In factory SD ammo, Speer Gold Dot makes a line for short barreled firearms. Nothing to worry about unless there was a noticeable inconsistency from shot to shot, in which case you may be dealing with a contaminent of some kind - slim chance, but possible. Adios, Pizza Bob
-
Shipping long gun for warranty service
Hope it made it. I'm sure that what the driver did was against company policy - or did you not declare it a firearm. Firearms (handguns and long arms) shipped FedEx or UPS have to be shipped from a hub. They cannot be shipped from a Kinko's, a Mailboxes or even stores that are just called UPS store or what have you. Must go from a hub. Handguns shipped via FedEx or UPS must be shipped next day air - that is their company policy, not law. It keeps it in their system the minimum amount of time. It must be declared when you ship it. If they refuse to take it or tell you they can't, go up the chain of command until you find someone that knows how to read their SOP Manual. As for the USPS - only FFL's can ship a handgun via the USPS. A civilian can ship a long gun. Again you must declare. There is no required shipping protocol. Priority, registered, signature required would be recommended. Understand that this is for you or I shipping a gun. Many manufacturers cut their own deals with common carriers (FedEx or UPS) and because of volume or exclusivity may be able to ship any gun by any agreed method. I had trouble shipping back an STI for warranty work. They sent a shipping label for 2nd day air and the shipper refused to take it - said it had to go next day. STI ships their guns via 2nd day air because of a contractual agreement - an agreement of which a local hub would not be cognizant. I called STI from the shipper's parking lot and told them and they said it would take someone from the shippers home office to clear it. I was adamant I was not making a second trip and STI gave me their account number and I shipped it next day air. Make sure you are aware of pitfalls like this when getting shipping labels from manufacturers. Adios, Pizza Bob
-
EFGA members - Tell me more than the website does
IIRC, in the absence of an RO, the person that was there first (longest) becomes the defacto RO. In reality, most people on the range communicate pretty freely and will be cognizant when someone wants to go down range. BTW, that's "cease" as in stop, not "seize" as in grab. Adios, Pizza Bob
-
Shipping long gun for warranty service
This only applies to handguns. A private individual can ship a long gun via the USPS. Check their site for particulars. Moot in this case since he got a shipping label from Ruger. Adios, Pizza Bob
-
Realistic Next-Step Up from .22LR Rifle
Look at the .17 rimfires. Inherently accurate. Less expensive than a centerfire. Lots of fun. JMHO
-
6 stage classifier cjuspsa 8-12-12
The elevation screw goes into a threaded plate that fits into a track milled into the frame under the rear sight base. The track keeps it from turning and the leaf-spring action of the sight is what causes it to rise against the elevation screw. If you have backed the elevation screw out too far, it will have come out of the plate, meaning you have run out of elevation adjustment. Was the new FO front sight the same height as the OE blade you removed? If this is what has happened, you need a shorter front sight and you may need to remove the rear sight, slide the plate out and start it on the elevation screw and then slip the plate into the track while reinstalling the rear sight as an assembly. I'll see you there - maybe before you get a chance to read this. Adios, Pizza Bob
-
6 stage classifier cjuspsa 8-12-12
Alec: If you have cranked you windage screw too far, the screw that it travels on may have broken. Look on you tube about replacing the rear sight blade and you'll understand what I'm talking about. Adios, Pizza Bob
-
Zeroing a scope and sighting in
You need to find out to what ammunition the hash marks are relavent. One would assume service ammo, but is it M193 or M855? Once that is sorted out find a ballistic chart for that bullet weight/cartridge and your barrel length. Now find the 200 yd zero on the chart and then follow that line back to the 100 yard range. Now you can zero your scope on a 100 yard range for the POI shown on the chart. Not a big fan of these range compensating reticles, but doing it this way will probably be no worse than actually shooting it at 200 yards. A solid rest will work better than a bipod, but you may find it shoots to a different POI with the bipod if you sight it in over a rest. To shoot effectively with a bipod, the legs need to be "loaded" (slight forward pressure of the rifle) consistently shot to shot. Good luck. Adios, Pizza Bob PS: Yes the red dot should be zeroed to the CQB distance you choose.
-
IDPA Somerset 8/19
http://www.somersetidpa.com/matches/
-
6 stage classifier cjuspsa 8-12-12
Thanks for those words of encouragement. Way to get in our heads.
-
NJ Resident buying gun in TN
You are OK federally with a long gun, but there may be prohibitive state laws. Some states only allow purchases from contiguous states (that's the way the federal law used to be). Regardless, you'll have to find someone willing to sell to someoen from NJ and you still need your FPID and a COE for yourself and one for the seller, in order to be in compliance. Adios, Pizza Bob
-
6 stage classifier cjuspsa 8-12-12
This could be the "Perfect Storm" of wheelgunners. I have only shot a revolver in IDPA because I don't have one of those fancy spring-loaded doo-dads like alec and even the more mundane North Mountain multi moonclip holder is ridiculously expensive ( $22 worth of Tech-Loks, $3 worth of kydex and $5 worth of aluminum posts for $135). Since this is a low round count I am fine with my IDPA set-up, so I think I'll probably go on Sunday too. Who are we missing? Ray Ray? Smokin' 50? Let's get a squad of revolver shooters. Adios, Pizza Bob
-
Shipping a handgun to Glock
I repeat - they should be paying the shipping. Some manufacturers will stamp your old serial number on the new frame, precluding any transfer issues. Not sure you need to transfer back through a dealer, even if the serial number changes.
-
Shipping a handgun to Glock
If Glock is replacing this under warranty, have them send you a call tag. Let them pay for their mistakes.
-
Revolver Holster for Gun Games?
A week from this Sunday (on 8/19)... http://www.somersetidpa.com/matches/ Come on out and play. Adios, Pizza Bob
-
American Eagle .40 S&W Headstamp Question
Very nice. Ha, ha - some HS rounds that weren't supposed to fall into civilian hands.