Everything posted by Pizza Bob
-
Recommend a range bag
Midway range bags are on sale now!
-
Holster Advice..
Forget "One size fits all" - compromises are never a good thing. For the most bang for your buck, try this for your M&P... http://www.blade-tech.com/Revolution-Combo-Pak-pr-1324.html Adios, Pizza Bob PS: And throw away the paddle attachment.
-
know a good shop to bore sight?
Bolt action? Do it yourself - no special equipment needed. I do this in my basement where I have an unobstructed run of 25 feet or so. Post a large target. Support the rifle - sandbags preferrably. Remove the bolt. Put the cross hairs of the scope on the center of the target. Get behind the rifle and look down the bore - what you see is appx where the POI would be. Adjust the scope until the sight picture and the view through the bore coincide. This should put you on the paper at 25 yards. Make fine adjutments from there, using live ammo and ultimately moving the target to the desired range. HTH Adios, Pizza Bob
-
WARNING: Possible Problem with WWB 9mm
As far as we know, but have heard nothing since the initial postings.
-
NRA Basic Pistol student handguns
It was a rhetorical question.
-
CJRPC July USPSA
Nobody. They were waiting for you to come home.
-
NRA Basic Pistol student handguns
Ruger Single Six....is there any other?
-
Gun safe questions - weight, floor mounts, etc
I think that sometimes people go waaaaay overboard when buying a firearm safe. A safe is there to stop amateurs/junkies and the like. For that purpose, almost any safe will do. If somewhat light in weight, secure it to the floor with lag bolts. People that spend thousands on a safe with a 6" door and ten active locking lugs, etc, etc, often fail to realize the door is the least vulnerable area - usually the sides and back are nothing more than 10 ga. A drill and a sawz-all will get you in that in short order. If they can't carry it off en toto, and the door is pry resistant, you should be GTG. It helps to put it somewhere where the sides and back are not easily accessible - just to make life more difficult for the bad guy. If a professional wants your guns - most of these safes are not going to stop them. Fire protection is another questionable feature, but not one I have researched thoroughly, so I haven't formed an opinion on that yet. My preliminary thought is that it's another gimmick to part you from your money. But that's just me. Good luck. BTW, to any bad guys reading this: Yes I do have a safe - actually several. I'm an OK shot also Adios, Pizza Bob
- S&W serial # look-up please
-
S&W serial # look-up please
Two thoughts on that. The person you bought it from was not the original owner and went by the same source I did - overlooking the fired case. Or, is it really a factory fired case? In some states that require a fired case, you can have that service performed by the SP. For instance, it was sold into NY, which requires a fired case. The purchaser takes it to the SP and has them perform that function and the envelop which contains the case is dated on the actual day of firing - which has no correlation to the production date of the firearm. Adios, Pizza Bob
-
Gun shop has my handguns booked in
The extent of the dealer's knowledge was probably pretty much the same as any man-on-the-street. Gun buyback = $$$ for basically garbage. He put it forth to the OP as an alternative, knowing that some of the guns proffered were valueless. Yes, I'm guessing at what he knew, but I am erring on the side of caution - giving the dealer the benefit of the doubt. I think your position is much more of a stretch in assuming that he knew exactly how the buyback worked and used it as an enticement to get the OP to part with his guns so he could defraud him. Your stated position of "It's a ripoff" is potentially libelous should the dealer be named. JMHO Adios, Pizza Bob
-
Gun shop has my handguns booked in
It sounds like a lot of these are what could be termed "Saturday Night Specials". Back in the 20's and 30's guns like the OP described were given away as tobacco premiums. Even named ones, like Iver Johnson are no big deal. Little to no collector value. You're demonizing this dealer because he put forth a plan that took, essentially worthless guns and would have turned them into $75 - $100 per gun via the buyback. I'd just leave them in his possession and wait for another buyback. As Alec said, these are supposed to be anonymous (although not so much if the AG guidelines are followed - but that's another story), so if the buyback is not local to his store, who's to know? Once he suggested the idea, you should have done it on your own and only consigned the saleable arms to the dealer. I really see no fault attached to the dealer - not to say he shouldn't try to help you out, the $35 per gun does sound a little fishy, but I'd like to hear his side of the story - thus far we've only heard yours. Adios, Pizza Bob
-
Info wanted on STI Spartan 9mm
I think a lot of people here are assuming facts not in evidence. I'll be the first to stipulate that STI builds a great gun and you seldom hear of any malfunctions. IIRC, the 3" version is new as of this year (debuted at SHOT show), so they really haven't been out there long enough to garner a track record. I do know that there are a good number of 1911 pistolsmiths that will not build 3" guns because of reliability issues - and that's in .45 ACP, I don't know whether the variable of it being a 9mm is an asset or a detriment. The gun was designed with a 5" barrel and has been found to work equally well with a 4" (4.25" really), but now you are having to deal with the recoil impulse, eject/chamber cycle with a much smaller, lighter slide. It's in these guns (3-inchers) that you find the multiple recoil spring set-ups to deal with these issues. Maybe they run like a Swiss watch, but, being somewhat of a traditionalist, a 3" 1911, to my way of thinking, is something to avoid - no upside and a possible huge downside. Barrel length is not hard to hide - why sacrifice reliability, velocity and sight radius? JMHO (well, you asked) Adios, Pizza Bob
-
Gun shop has my handguns booked in
Why should a gun dealer have any more of an idea how a buyback works than your average civilian? You've got a disconnect in your logic.
-
S&W serial # look-up please
8-shot model 63's are not even mentioned in he Supica & Nahas Catalog - which was copyrighted in 2006 with the latest data being 2004. One would have to assume that it is newer than that. Adios, Pizza Bob
-
USPSA - Shongum 09/01/2012
Yes. You pay the $40 in dues and shoot the match for free.
-
USPSA Scoring
I believe this is the simplest explanation... A "hit factor" s arrived at by dividing your points by the time. The highest hit factor is assigned the value of 100% and all others are then graded based on that. For simple numbers - if the highest hit factor was 18 and you had a 9, your score would be 50%. Maybe Maks can put a fine point on that. Don't forget, in some classes you have both minor and major guns competing, so the point values (except for A&B) are different. Confused? Everyone is - try IDPA - scoring is much simpler j/k Adios, Pizza Bob
-
9mm 1911
All three are good choices and are essentially the same selections I made when I was shopping for a 9mm 1911. One of my selection parameters though was I wanted stainless - not necessarily because I like it, but because it was to be a competition gun which meant a lot in & out of the holster. My choice was made easier in that the S&W with adjustable sights (another selection criteria) was nowhere to be found and ditto, in spades on the DW PM9. I think the S&W can be found now, but doubtful on the PM9 as they only make a limited number per year (200 - 250) and they are pretty much sold out shortly after the production run (which was in the spring this year). I ended up with an STI USPSA model, since it at least had the stainless slide. Most places that carry STI's discount them similarly, so you are less likely to find and buy one only to encounter a smokin' deal on the same gun the following week (don't you hate it when that happens). I got mine from an Internet dealer who offered free shipping, so no tax, no freight, just the transfer fee. It was already equipped the way I wanted it, with things that I would have had to add to the others, so when it came down to an apples to apples comparison, the STI ws only about $125 more than the Smith or DW. I love my STI. HTH Adios, Pizza Bob
-
Gun shop has my handguns booked in
No good deed goes unpunished. It was his mistake, but his intent was not to defraud. Once he accepted the guns, whether for this gun buyback or for consignment, they are entered in his bound book and they will require a P2P even to have them returned to the owner. I would leave them there and let him try to sell them, or have a sit-down with him and see where the costs of getting them back can be mitigated. He had good intentions and got caught-up in a gun buyback snafu (another reason not to like gun buybacks). Good luck. Adios, Pizza Bob
-
USPSA - Shongum 09/01/2012
This coming Saturday. Doing things a little differently, make sure you read all of Ron's message here... NEW ITEMS FOR Shongum Matches. We are trying to start the match earlier, 10 to 10:15 start. Registration will close by around 9:30 am, please arrive early. New Shooter briefing will be at 8:45am, not 9am. We are now using electronic scoring and on line registration/squadding is available this month. Round count is shown on the Shoot’N Score It website. (Link provided below.) We are using “Shoot’N Score It” (SSI), an online pre-registration tool. In addition to speeding things up the morning of the match to allow us to start shooting (and finish shooting) earlier, pre-registration via SSI provides for self-squadding. Shooters can sign-up/log-in to the SSI site, enter their basic shooter information, and click “Register.” Once registered, squadding can be set up. We reserve the ability to move folks around to assure we have adequate RO coverage in each squad and balance squad size. We can still accommodate walk-ons the morning of the match through the traditional sign-in process, but the less we have to rely on this, the quicker we can be at getting the match started. ** Shooter information stored in SSI is not indexed/returned by search engines, so shooter names will not come up in Google searches. ** To pre-register for the September Shongum match via SSI: Go to http://shootnscoreit...ipsc/match/696/ If it’s your first time using SSI, create a user name/password, etc., and click “Sign Me Up”, otherwise login to sign up. On the match registration page, enter your USPSA/shooter information, and click “Register” We ask that ROs select “Military” in the Category field so that we can easily identify them and ensure that each squad has enough ROs [*]Click on the link to “squads” on the left of the page, choose a squad from the list, and click “join this squad” If you do not want to use SSI, please send me an email ([email protected]) back with the following info to register. Reply back with: Name: USPSA number: Division: Power Factor: AS ALWAYS: Help with setting up and packing up is always needed and appreciated. TIME PERMITTING, there will be a shotgun side stage after the pistol match of 14 rounds, 7.5 birdshot or smaller. If the match is cancelled for weather, I will send out an email notification Friday around 5pm.
-
8/26 Old Bridge USPSA
The "next one" is Shongum this coming Saturday
-
Oaks Gun Show - Philly Aug 25/26 2012
Was that the 1903A4? If so, do you recall the vendor? Thanks.
-
PA Gun Show Ideas
Not to be critical (well, all right, I'll be critical), but the night before a gun show is not the time to start thinking about what you want. To optimize your gun show experience and achieve maximum cost effectiveness, you need to know what you want and to have thoroughly researched pricing, so if, on the off chance you find that exact thing, you'll know whether you're getting a bargain, or raked over the coals, or something inbetween. That being said, I always liked any of the Winchester 94 commemorative models that came with a heavy octagon barrel - the Teddy Roosevelt model springs to mind. They are almost always .30-30, which should mitigate your ammo costs somewhat - at least as compared to something like .355 or .405 Winchester, or even the mundane .45-70. They made a bunch of them - there is even one for sale on the forum (see I might have just saved you the cost of admission and the gas money). Go, have fun. Adios, Pizza Bob
-
What scope rings for Henry .22?
If you avail yourself of a 4X or 3-9x variable - or any scope with a non-adjustable objective lens, you want one that is intended for use on a rimfire. This does not make them any less rugged, it simply means that the compromise distance for pre-set parallax adjustment is more in keeping with the useful range of a rimfire. Adios, Pizza Bob
-
Apply for FID : Listing nonrelated coinhabitants
2C:58-3,f Which reads in part... There shall be no conditions or requirements added to the form or content of the application, or required by the licensing authority for the issuance of a permit or identification card, other than those that are specifically set forth in this chapter.