Everything posted by Pizza Bob
-
Interview with detective prior to getting/ submitting permit apps?
It depends on what your, and the PD's, definition of an interview is. PK90, in an earlier thread, showed the instructions from the NJSP Application Guide. It listed a whole bunch of things that are to be checked (asked/verified) while the applicant is there turning in their paperwork. This is a defacto interview and perfectly legitimate. If, however, it is a real sitdown with a detective and he queries why you want a firearm and questions along those lines, then, yes, it goes beyond the scope of the application process and would violate the added content statute. Seems that you are a little "quick on the draw", condemning this PD before you even know the content or scope of the "interview", especially since you aren't even the applicant. Adios, Pizza Bob
-
1000 rd case of 40 S&W American Eagle 165gr FMJ - $271.80 shipped
In order to make major, it only has to be going 1000 fps. I believe that 165 gr AE is over 1100 fps. I use it in my revolver for major in ESR. Adios, Pizza Bob
-
The media and JHP ammunition...
It is typical of the MSM, just as it is with politicians, not to check facts and verify what they are writing about. The press got this one wrong x 2. The first mistake was when the media dubbed teflon coated bullets as cop-killers, you can read a short dissertation on that subject here... http://en.wikipedia.org/wiki/Teflon-coated_bullet How we got from the teflon coated KTW's to simple hollowpoints as being the fearsome cop-killer bullets, I'll never know - some other misinformed, to lazy to do a little research journalist, I would imagine. Adios, Pizza Bob
-
IDPA Somerset 8/19
What better way?
-
IDPA Somerset 8/19
You're never coming home on leave?
-
mag holders for USPSA events
Two of these will put you in good stead... http://www.brownells.com/.aspx/pid=41583/avs%7CManufacturer_1=BLADE-TECH/Product/DOUBLE-MAG-POUCH-W-TEK-LOCK
-
EFGA members - Tell me more than the website does
Cased/boxed, inaccessible, to & from the range - unless you have a PA LTCF or reciprocal CCW.
-
Wilson Shok-Buff® Recoil Buffers, 1911, any good?
For a range/competition gun they are OK. Just remember to change them regularly. Do not use them in a gun on which you may stake your life. They do deteriorate over time and use and can come apart at the most inopportune time. Happens during a match you drop a lot of points - happens when things go bump in the night and you may lose more than points. Adios, Pizza Bob
-
Rebarreling an S&W 686?
Frank, I think Duppie's got it right. They aren't truly crush fit, they are just no longer pinned. If they are to be reused, it will require setting the shoulder back so they can be properly indexed.
- Zeroing a scope and sighting in
-
Zeroing a scope and sighting in
The horizontal knob is elevation and the vertical one is windage. If it has caps on the turrets, once you take them off there will be directional arrows for windage (left or right) and elevation (up or down) and it may tell you what value each click is in either inches or MOA. Have fun. Adios, Pizza Bob
-
Grain weight, FMJ, etc....
It can make a difference. Different weight bullets will shoot to different POI's - although at the range must shooters are shooting they may not notice the difference. Recoil characteristics may be different with a larger, slower bullet providing more of a "push" than a "snap". Some bullet profiles may work better in some guns than others. If you are shooting in any kind of competition that involves steel, the 115 gr bullets may be "iffy" on the takedown (rules stipulate that the steel must fall using ammo that meets the power factor - bullet weight x velocity / 1000. Minor = 125 / Major = 165). So yes, bullet weight does make a difference, grasshopper Adios, Pizza Bob
-
Documents requesting ammo purchase receipts?
raz-0: And you know this how? NICS records of approved transactions are required, by federal law, to be destroyed before the start of the next NICS business day. From the FBI Website (http://www.fbi.gov/about-us/cjis/nics/general-information/fact-sheet/)... Current destruction of NICS records became effective when a final rule was published by the Department of Justice in The Federal Register, outlining the following changes. Per Title 28, Code of Federal Regulations, Part 25.9(b)(1), (2), and (3), the NICS Section must destroy all identifying information on allowed transactions prior to the start of the next NICS operational day. Are you saying that the NJSP, serving as a POC are violating this mandate by retaining records of NICS checks? If so, how do you know this? People want to know. Adios, Pizza Bob
-
Holster questions
Yes. So you will have the holster, the DOH piece a SR and a TL mount.
-
What paperwork do I need to sell a rifle?
There is no "registration" of long arms.
-
Holster questions
Tech-Lock is a great system, but moreso when you are running a comp (over/under) belt system, where you are not dealing with belt keepers (loops). If you intend to use this on the belt that holds-up your pants, the Stingray is the better option. With the SR you can bridge belt loops. In IDPA, for instance, the gun has to be on your body's vertical centerline. Generally the side seam of your pant leg is a good indicator of this position and every pair of pants that I own, have a belt keeper at the top of the seam. With the TL you have to either position the holster ahead of that belt loop (illegal for IDPA - probably OK for USPSA since their criteria is the point of the hip), or behind it - which can make for an awkward draw angle for some people. The SR can bridge that belt loop and place the holster/gun right on the seam. This also helps stabilize the holster/gun by preventing movement on the belt. TL's are great for mag pouches, as for holsters, take the above into account. JMHO Adios, Pizza Bob
-
Anthony Colandro goes head to head with one of King Mike's Mayor's Against Illegal Guns.
Nice job Anthony! One point - automatic weapons were dealt with in the NFA of 1934, not the 1968 GCA, and transfer between/to civilians of any made after 1986 is prohibited (federal level - NJ is a no go, period - of course). It was a good civil discourse. Adios, Pizza Bob
-
Documents requesting ammo purchase receipts?
Hogwash
-
Need advice for future handgun purchase
OK, I'm neither of those guys and I'll admit to a Sig bias. The P250 has a wonderful trigger. Those that do not like it (and remember it is a very subjective thing) are used to the tactical tupperware as represented by Glocks and suchlike. The P250 trigger is like the best double action revolver trigger you have ever pulled. Nice, consistent 5# - 5.5# with no stacking (weight of pull increases the further the trigger is pulled). Not everyone's cup of tea, but it does teach you proper trigger discipline and follow through. As for accuracy - I saw the owner of a range in Manchester, NH take a P226 X5 L1 (a $2200 gun) from the sample case of a Sig rep, load the mag with Fiocchi 9mm ammo and empty the magazine at a target at ten yards. Result? One ragged hole where the x-ring used to be. He then took the, then brand new (so first generation P250) from the case and repeat the exercise. Result? An even smaller one ragged hole. I know, I know, not the arrow, but the Indian - but doesn't matter how good the Indian is if the arrow is bent. The P250 is a unique handgun that is an acquired taste. Certainly not for everyone and vastly different than most plastic fantastic pistols, but don't sell it short. Remember: Try before you buy. Adios, Pizza Bob
-
Double Barrell AR-15
N/G - two rounds fired with each pull of the trigger = machine gun
-
Man Orders TV Through Amazon, Gets Assault Rifle
You're right. This whole thing is so full of fail that I am almost to the point of donning my tinfoil hat. Anybody on here buy a 716? How was it packaged?
-
Best way to remove bluing?
The major chemical component of vinegar (5%) is acetic acid. It will harm the metal if left on it for long periods of time (don't soak for extended periods) or not thoroughly cleaned off. It is a very weak acid, but an acid nonetheless. Adios, Pizza Bob
-
Man Orders TV Through Amazon, Gets Assault Rifle
I don't know - my bogus meter is off the scale. Has anybody confirmed this was a real 716? I ask that for two reasons: 1) I heard it explained that it was probably a mix-up at a "fulfillment center" a logistics warehouse that warehouses items for numerous companies and ships them out on demand. I can't say for certain. but unless things have changed, Sig doesn't use fulfillment centers and if they did, they would have to be licensed (federally). Sig production can't keep up with demand. As soon as a gun is completed, it ships. I've received Sigs that weremade the week before. And, 2) Again, unless things have changed, Sig does not use cardboard boxes with foam blocks in them for shipping long guns. My experience was only with the 556, but they were shipped in a plastic case, just like their handguns. As for the police comment - there are lots of things you are not allowed to have in the district - like an airsoft gun with no orange muzzle perhaps? Not a conspiracy theorist, but it is a little coincidental that this happened at a time when Lautenberg and his cronies are trying to do away with Internet sales. It is what it is. Adios, Pizza Bob
-
Need advice for future handgun purchase
Three different trigger actions: Sig P250 - Hammer fired, so has double strike capability. DAO, very long pull and very long reset. Revolver guys love it and wish their favorite wheelgun had a trigger pull like the P250. Those used to regular semi-autos think the reset is too long. The modularity is a neat feature and makes it easy to clean. The XD is really a SA firearm. It is striker fired (no second strike) and the striker is fully cocked every time the slide cycles. Trigger is consistent. S&W M&P is, what has come to be called, a safe-action firearm. Again striker-fired, but the striker is only partially cocked during the slide cycle. Pulling the trigger finishes fully retracting the striker and releasing it. Trigger is consistent shot to shot. HTH Adios, Pizza Bob
-
Oaks Gun Show - Philly Aug 25/26 2012
This the show that filled the void when VF stopped having them at the Convention Center. I haven't been there since that happened, but have heard good things about it. It will be interesting to see if the VF promoters can make a comeback at their new site. You should be GTG for a rifle, but I believe that for a lower it has to be transferred through a NJ FFL. PK90 or someone else will jump in and correct me if I'm wrong, but that's how I remember it, since a lower is neither a rifle nor a handgun. Adios, Pizza Bob