Everything posted by Pizza Bob
-
Is 5.45 Surplus gone?
From AR15.com... Due to an Executive Order signed by President Clinton, the US military can no longer "surplus" ammunition, except via the Civilian Marksmanship Program (CMP), and the CMP does not sell 5.56/.223 ammo. US military ammo (most notably from the Lake City Army Ammunition Plant) used to be widely available, but has become quite scarce and the prices quite high, in the last few years. Though some military ammo components are "saved" by contractors disassembling the ammo and selling the components, most expired or out-of-spec lots of ammo are burned. Billions of rounds of ammo, paid for by US tax dollars, are burned yearly. Small quantities of loaded ammo are occasionally available, usually at gun shows. This is either old stock from before the ban, police trade-ins, or stolen military ammo. The military has programs where it gives police departments surplus weapons and ammo and these departments sometimes trade this ammo to their ammo distributor for cash or other ammo. The distributors then make the exchanged military ammo available to the civilian market. Quantities are usually small and prices high. Despite this, military specification ammo (Mil-Spec) is available to the public and can be obtained from a variety of sources. Of course they wouldn't sell something that would open them up to liability, but a QC reject may have some slight aspect out of spec. There was British 5.56x45 ammo (Radway Green IIRC) on the market several years ago that missed the velocity spec by a very small margin, but the whole batch was rejected. Nothing wrong with it and it may very well have chrono'd consistently, just a tad slower than the spec. Adios, Pizza Bob
-
Is 5.45 Surplus gone?
doh! I. of course, was referring to 5.56x45, not the Russian 5.45x39 about which this thread was inquiring.. Stupid, stupid, stupid.
-
Additional Permit to Purchase Question
NJ2AS definitely. If you have the chutzpah, schedule a meeting with the Mayor or the CLEO - mayor might be more effective since his is an elected position and he might be more sensitive to pissed-off citizens voters. Tell him that you are puzzled - the police expect you to obey the law, especially firearms laws, yet they seem to be violating them with impunity. Print out the statute and be polite. I wouldn't expect to come away with a victory, but I would try to leave the impression that it won't end with your meeting unless they comply. Put on your poker-face and be polite. Good luck - at a minimum contact NJ2AS and forward copies of the forms. Adios, Pizza Bob
-
Finally a good article out of ny
This was written by John Lott, long a firearms champion and researcher. He has debunked many liberal myths about guns with his common sense writing - now if we could just get them to read them :unknw:
-
1911 question
They're identical except for barrel length. The 4" would be the equivalent of the Commander (although actual Commander length is 4.25"). It was just that all the others you listed were full-size so it was curious that you designated the 4" for the STI. Adios, Pizza Bob
-
Howdy ya'll. Southerner moved from GA
That would be more likely to happen if you filled-in your profile so we knew where in the state you are located and/or what your "local range" is. Welcome to the board. Adios, Pizza Bob
-
Armed Utah citizen stops stabbing spree in grocery store
Great story, but it happened almost three months ago.
-
Is 5.45 Surplus gone?
Clinton ended surplus ammo sales during his term in office. The stuff you buy now (XM855 and XM193) are QC rejects - that is what the "X" designates before the cartridge designation.
-
Ammo finds - LMK if this is a good deal
Call me old school, but I wouldn't be running steel-cased ammo through my spankin' new Daniel Defense M4. I know, I know. That's just me. Adios, Pizza Bob
-
S&W 686 4" vs new 586 4" vs 686 SSR?
Six of one, half a dozen of the other. All essentially the same, with the SSR having some nice bells and whistles the others don't. They all have the internal lock - not saying that's bad, but to some it is a hated feature. Between the SS and the Blued variety, it is simply a matter personal taste, although if I was going to use this for competition (in and out of a kydex holster), I'd go stainless, and if that were the case, I'd go SSR. I love a blued gun and have many of them, but I'd rather not worry about finish wear on a competition gun when it is something that can be so easily eliminated by going stainless. Seven round guns are nice, but preclude you from any practical use in IDPA or USPSA (you can use them, but you can only load six rounds - now you not only have to worry about a rapid reload, but also properly indexing the cylinder). Of course, in USPSA you can shoot it with the full seven rounds in Production class. If that route were to be considered, then an eight-round N-frame modified for moonclips would be more effective (and actually competitive in some hands). My $.02 - you know what they say about opinions. Adios, Pizza Bob
-
Surefire E2D Defender ....
Regardless of the strike bezel, IIRC, the E2D is an incandescent bulb. With LED technology where it is, I think that is a better option. Surefire makes fine lights, and they were the best when you were limited to regular bulb, but LED's are the way to go. JMHO Adios, Pizza Bob
-
1911 question
Why the Spartan in 4" when all the others are full-size 5" guns? Of those listed, I'd have to go for the STI. The Rugers look nice, but no history on them as yet. The Spartan has been around and you'd be hard-pressed to find a bad review. Get the 5". Adios, PIzza Bob
-
.38 +P In My 686....
Scott: Bullet and case diameter are the same as a .357. If you bought this used, or have shot .38 Spl through it before, I suspect that you just have a build-up of crud in the cylinder at the shoulder in the chamber. Since the only difference between .38 SPL and .357 Mag is case length, and the gun is chambered for .357 Mag, there is a shoulder in the chamber that corresponds with the length of the .357 case (the case mouth reaches the shoulder). With .38 Spl cases tha case mouth falls behind the shoulder and you get unburnt powder, lead, lubricant build up. This can make it really hard to chamber .357 rounds, but may also affect loading .38 Specials, as is probably the case with your problem. A brass brush, some Hoppes #9 and some elbow grease will probably remedy your problem. Adios, Pizza Bob
-
Konus 20-60 X 100 on Sale at DVOR
That is a terrific price. Just be aware that if you buy this, the scope is HUGE. You will need either a HD tripod or a HD scope stand to support it. Adios, Pizza Bob
-
NJ AWB is too weak???
I wrote a comment - couldn't resist.
-
Revolver work
If you are seeing brass in the cylinder/barrel gap, there may have been a case separation. Remedy is still the same. The collar of the case that still encircles the bullet is lodged in the forcing cone. The only thing I'd caution you about is to look at the rear of the cylinder, between the case head and the recoil shield - I believe this is a 28-2, yes? That would mean a rebated cylinder, so it should be easy to spot if the primer backed-out against the recoil shield. If not, then I'd say go ahead and use the dowel. Since firing pin can't protrude past the recoil shield without the trigger in the rearward (pulled) position, you won't be driving the primer against anything that could set it off. Chances are the primer is already detonated, or you wouldn't be in the shape you are in now. Regular safety precautions apply. Wear safety goggles and do not get you head, or other appendages over the bore. I'd let the dowel be free standing and tap gently. May not take much to dislodge and push it back into the cylinder to the point it can be opened. I've only had one case separation in a revolver, and fortunately it was a casehead separation - bullet went down range, empty case came out of the cylinder in two pieces. Good luck. If you decide to take it to a smith and you don't want to use NJFAG (probably closest to you), there is John Robinson down at CP in Trevose/Southampton, PA. A bit of a hike and you'd probably have to leave it, but thought I'd put it out there as an alternative. Adios, Pizza Bob
-
Revolver work
Chris: Can't you just take a brass rod (or hardwood, for that matter) and put it down the barrel and lightly tap the bullet back into the cylinder throat so the cylinder can be opened? Support the cylinder and tap lightly. Once you can open the cylinder, you may be able to extract the case (dependent on the length of the bullet), or you may have to continue driving it out the rear. You can use more ooomph once the cylinder is open and supported, because at that point the crane is out of the equation. If you take it to a smith, that's all they'll do. That's all you can do. Adios, Pizza Bob
-
NJ101.5 discussing 2A now!!
If this was addressed to me - I am not, nor ever intend to be, a member of Facebook. This (and similar) forum is as "social networky" as I intend to get. Adios, Pizza Bob
-
Change of address, do you hand in your old FID?
Interesting. While you can use the STS-033 Application form (there is a box to check at the top, for a change of address), you would be better off to use the STS-003 form referenced in the NJ Administrative Code, which is specifically for the change of address, duplicate card etc. The benefit being that there are no fields on this form for either employer information or for personal references. The NJAC speciifes a non-criminal background check also - which infers to me the use of the SP-212A form, but a CLEO could probably use it to justify re-printing. FYI: The STS-003 and the SP-066 can both be downloaded from the NJSP site. I wouldn't even ask the local PD, I'd just fill out the forms and present them as a fait accompli - if you're really ballsy - tell them you have your $18 MO for the SP-212A also - may pre-empt any talk of re-printing. Adios, Pizza Bob
-
7-25-12 Going to Range 14
I knew that, just couldn't resist. Are you old enough to remember Mr. Peabody's Wayback Machine on the Rocky & Bullwinkle Show? You can correct the typo in the header by using "Full Editor" Have fun - gonna be too hot for us old, fat folk.. Adios, Pizza Bob
-
NJ101.5 discussing 2A now!!
Be my guest
-
7-25-12 Going to Range 14
Are you taking the "Wayback Machine"?
-
NJ101.5 discussing 2A now!!
Figured there was little chance of getting through, or, even if I did, not enough time to make a point. So, I e-mailed the host of the show (Jim Gearhart). Won't do any good, but it brought my blood pressure down a few points. Here's the e-mail... Jim: I was surprised and disheartened to hear you promoting Lautenberg’s magazine capacity limiting proposal. While I hope the reason was simply to create controversy and stimulate the number of callers, I fear that you may have been drinking the New Jersey Kool-Aide for too long and truly believe what you are saying. Are you aware that NJ already has a magazine capacity limitation? In NJ the mere possession of a magazine that exceeds a 15 round capacity is a felony. So what’s the answer? It was fifteen rounds. Now they say that we need a ten round limit. After the next tragedy, will that be reduced to five? How about three? What’s the magic number? The answer is there is none. Magazine capacity has little correlation to the number of shots fired in a given time span. I am a competitive shooter – unfortunately, not a very good one – I compete in the lowest rated class allowed under the rules of my sport. Part of the rules for the class in which I compete limit you to ten round magazines. I can draw from a holster, fire two rounds each on 15 separate targets (total of 30 rounds) while moving over a span of 30 – 40 feet. I can do this in less than 30 seconds, and as I said, I’m slow. Magazine capacity has little to do with sparing lives and has everything to do with getting the elephant’s trunk into the tent. This is “feel-good”, sound-bite legislation that makes it look like our legislators are actually doing something. I’d like to comment on several other things I heard you espouse this morning. You kept referring to “Assault Weapons” and parroting Lautenberg, why do we need them to shoot ducks, etc. First, an assault weapon is fully automatic – fires continuously with a single pull of the trigger – they have been strongly regulated since 1934, outlawed completely in New Jersey and must have been produced prior to 1986 for a private citizen to own (in free America), which has driven prices well into the five figure range. What you (and Lautenberg) seem to think are assault weapons are nothing more than semi-automatic firearms (only one round fired with each pull of the trigger), that look like the military counterpart, but as far as function is concerned are no different that the Remington 7400 deer rifle or maybe your Remington 1100 shotgun that you use for duck hunting. So now they are trying to ban items based on their appearance – what would happen if they applied the same standard to people? While we are on the subject of hunting, I don’t recall the second amendment saying anything about hunting. Please remember that when the second amendment was framed, we had just thrown off the yoke of a tyrannical British government, and were able to do so because of the private ownership of firearms. The second amendment was framed as a protection for “the people” against a tyrannical government. And before you start with the “militia” argument, the “militia” in colonial times consisted of every able-bodied male. It was not a formal, organized military unit. Beyond that, the Supreme Court has already ruled (the Heller decision) that the second amendment is an individual right, not a collective (militia) one. Someone made the point about a well-trained armed citizen could have possibly ended the tragedy sooner and you were only too eager to jump on board the “well-trained” wagon. Allow me to disabuse you of that notion. In, I believe 2009, the “well-trained” NYC police department had a “hit ratio” (number of hits on target vs. number of rounds fired) of 23%. That, of course means that 77% of rounds fired missed the target with the potential to injure innocents. That same year in citizen involved shootings (there are now 40 states that have “shall-issue” concealed carry legislation on their books) the hit ratio for armed citizens in defense of their or other’s lives, was 68% - almost three times the rate of the NYC police department To summarize: I am vehemently against: Know-nothing politicians passing ineffective legislation about things they neither understand or care about, that affects my ability to protect myself against any and all threats Passing legislation based on the way something looks Making political capital on the backs of victims of a tragedy (I find this one particularly abhorrent) There was nothing that could have been done to prevent what happened in Colorado without grossly abridging personal freedoms. You keep talking about “trade-offs” – there can be no trade-off when it comes to personal liberty. I would point out the truism that when you trade liberty for security, you have neither. Sad, but the price of living in a free society is often a high one. Adios, Pizza Bob
-
Batman Massacre
I am hoping that the NRA has the good sense not to tread on the backs of the victims of this heinous crime, for political gain. That is a strategy best left to the opposition. It just shows them up for the ghouls they are. JMHO Adios, Pizza Bob
- Crypt Keeper at it again