Everything posted by Pizza Bob
-
Any members here from the Princeton area??
How much time have you got?
-
Denied by the City of Paterson, Now what?
Full of fail. If you appeal and win, you have not been denied - the appeal and the granting of the FPID and/or P2P's is part and parcel of the same application process. Where does everybody get this "costly" BS? Costly only in the terms of the time it takes up. This does not require a lawyer to appeal. If you are clean, and denied unjustly, you go before the judge yourself. You are already conversant with the law regarding additional forms and requirements. If you get shot down again (unlikely) then it may be time for a lawyer. Sheesh, you guys on the forum are making it worse than the Paterson PD. How about a little show of support and encouragement instead of being such a bunch of naysayers. Adios, Pizza Bob
-
Any members here from the Princeton area??
Wednesday is fine with me. Evening again? 6 or 6:30? Wicens is a public range in Furlong, PA. $15 a day + $7 certification for each type of weapon (one time fee). Any others from the area?
-
Denied by the City of Paterson, Now what?
As for the public health safety and welfare, that is probably also a result of not giving them their illegal form and added requirements. They want you to do their job for them. The PD is supposed to conduct the investigation to ascertain all the facts they want you to stipulate too. This assumes that you have no criminal record or even something like a DUI (there are guidelines for when that becomes prohibitive also). You don't need a lawyer, just show-up for your appeal with the same statute that you showed the PD - I think the judge will take it more seriously. This $hit has got to stop. Definitely contact the NJ2AS - the burden will still be on you, but they can give suggestions and opinions. Good luck and keep us informed. This is a clear-cut violation of the statute. Adios, Pizza Bob
-
Buying First Gun Used - Good Idea?
Fixed it for you. Had to have been a typo. No such thing as a 687.
-
Wadcutters as SD round?
From the Aitken Ruling, found here... http://www.njlawarchive.com/2012/03/30/201203301100141480682567/ In Mortimer, supra, 135 N.J. at 532, the Supreme Court analyzed the challenged statute In by referencing Ninth Webster’s New New N.J.S.A.CollegiateDictionary.Webster’sCollegiateDictionary 388 (1985), “dum-dum” is defined as “a bullet (as one with a hollow point) that expands more than usual upon hitting an object.” or “a Webster’s defines “hollow” as “an unfilled space” or low part of a surface,” and “nose,” indepressedrelevant part, as “the forward end or projection of something.” Id. at 576, 807. We are satisfied that the statutory language at issue is not unconstitutionally vague and cannot be interpreted toinclude a bullet that has been dented after it has been dropped,37A-0467-10T4 as Brian argues.The language is sufficient to notify “a personof ordinary intelligence . . . what conduct is prohibited so that he or she may act in conformity with the law.” This is the actual ruling, absent the judges remarks, which pretty much says that any bullet that expands "more than usual" falls under the statute. I have to agree that there is definitely an element of vagueness in the use of the term "usual", but that did not seem to be a problem for the appellate court. In reading the decision, another element that I found interesting - and relevant to another thread here on the board - was why the high capacity mag charges were overturned. The arresting officer unloaded them at the scene and counted 16 rounds while so doing. In court, he demonstrated that they held 16 rounds by actually loading one in front of the jury. It was overturned because the magazines were not dynamically tested by an expert to see if they actually functioned. The statute says that they must be capable of feeding ammunition continuously and directly into a semi-automatic firearm. Since they weren't actually function checked, the charge was overturned. Makes me wonder what would have happened had they tested them and had a FTF or FTE at somepoint before the mag was empty. Adios, Pizza Bob
-
Any members here from the Princeton area??
Andy, you can spearhead this one. I'm at Stbx almost everyday anyway.
-
FOID employment question
How long ago did they expire? If you are still within the 180 day from date of issue window, some PD's will still extend them even after the 90 day expiration has passed.
-
FOID employment question
I know this is little comfort, but, the employment info is to be used for employment verification ONLY. Some PD's abuse this and treat the employer as another reference. Being an "employment at will" state, it would be tough to prove any damages. You have to take your chances - supply the correct information (abide by the law) and hope your PD does it right. Or lie on the form and open yourself up to criminal prosecution. Adios, Pizza Bob
-
Buying First Gun Used - Good Idea?
Some good advice in the posts above. EBS pretty much covered what to look for with a revolver, aside from the obvious visible problems like corrosion, buggered-up screws and the like. While I think everyone should own a revolver (or a few ), you have to first determine what you intend to do with the gun. Do you really want a wheelgun or do you want it because you think you can get it cheaper? Will this be your only gun (it could happen) or are you planning to acquire others down the road? Strictly a range gun or are you going to want to play games? If you commit to a revolver, and learn to shoot it well, you will be well served for any future gun you choose. In the single-action mode (assume the OP is interested in a DA revolver), you can learn about grip, stance, sight picture, trigger let-off, breathing - all the basics. Then you can move on to double action to really challenge yourself with trigger control and sight picture while making that long DA stroke. A revolver is harder to shoot accurately than a semi-auto, unless time is not a factor and you shoot it all in SA mode. Consider both types of guns before you choose. The firearms mentioned in the posts above are good starting points. @ Patriot Oak - you'd be hard-pressed to find a non-stainless 686 - the first 6 is a designator for a stainless frame. A 586 would be the blued version and a 386 would be the lightweight (alloy frame) version. There may be some exceptions, but none come to mind right now. Adios, Pizza Bob
-
Any members here from the Princeton area??
I'm in as long as it's at Starbucks and I can bring the dog
-
By one of these and have all the 30 rounders you want...?
It's not "constructive intent", it is constructive possession. It's a moot point anyway - you do not have to have a semi-auto that it fits, there just has to BE a semi-auto that it fits, for it to be prohibited.
-
Newbie ?? about selling my 1911
Once a month can be satisfying, but I'd be lying if I didn't tell you it tends to be addictive. Though, better to put it to limited use, than to take a bath in the marketplace. Good luck. Adios, Pizza Bob
-
Newbie ?? about selling my 1911
Just wondered what makes you say this? Is it lack of desire, or is it that you think it is too difficult? If you're just not interested, that's understandable - but don't sell yourself short. There are a lot of different gun games around NJ, with people at all levels competing. If you shoot any kind of action pistol game, you'll never want to shoot at static, paper targets again. Good luck with whatever you decide. Adios, Pizza Bob
-
Where to buy if not out of state?
Since you're in Bernardsville, you might want to make a run down to Lou's in Raritan. Lot's of shotguns - don't know about used, but you're fairly close. Enjoy. Adios, Pizza Bob
-
If Your PD Drags Their Feet on FPID/P2P’s – READ THIS
Let's get on point folks. The purpose of this thread was to gather information about those PD's that are giving us problems so that we can help state organizations best decide where to use their resources. Thus far, with the exception of Post #2 all we have is people either telling us what a stellar/adequate job their PD is doing or a debate on whether NJ is infringing our rights (duh?). Post here if you have had to wait an extended period (as defined in the OP). For those that live in those municipalities and will be applying - document, document, document - can't stress it enough. If you just want to laud your PD or get into a 2A debate re: NJ, start another thread. Focus - this is for your benefit. Adios, Pizza Bob
-
GSG 1911 cleaning.. same as .45 cleaning?
Ha! If I can do it, anyone can do it. I wanted to change from the arched to a flat MSH, so it happened by default. One heads-up - if you are going to change the MSH, order a MS cap pin also. The GSG pin goes in laterally and cannot be used with a normal 1911 MSH in which the pin goes in longitudinally. Adios, Pizza Bob
-
How it Should Be Around Here And Why I Want To Move To Iowa!
Not to rain on your parade, but right next door (PA) you can do all that with just your DL. No special card from the state, giving you permission. Granted, compared to NJ, IA seems like heaven, but no need to look that far. Adios, Pizza Bob
-
New C&R holder
Did you get your state license?
-
Help-Stuck at my wifes garage sale!
Think of it as self-preservation. If you weren't there, you might come home to find that she sold said ammo for $.10 on the dollar - that is what you told her you paid for it, isn't it? Adios, Pizza Bob
- Daily humor thread
-
FPID at Palisades Park PD? Anyone with experience?
On subsequent permits, they will want the $18 for the non-criminal background check (SP-212A - done in leiu of fingerprinting) at the time of application. Permits and FPID's should be paid upon receipt.
-
FPID at Palisades Park PD? Anyone with experience?
You have already paid for the printing. There are no other charges until you take receipt of your FPID and/or P2P's. $5 for the FPID and $2 ea for the P2P's. The departments that take your money up front are the ones in the wrong - what if you don't get approved? You're fine. Adios, Pizza Bob
-
Bulk order, wanna split it? 7.62x54r or 5.45x39?
Dres: PM incoming
-
WTS Garrett Silent Thunder Fusion iwb rh draw kahr pm/cm 9 holster
Just to broaden your potential customer base, this should also fit the .40 S&W version of the models you list as well as the 9 & 40 in the MK line.