Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. Ahhh, come on, man-up.....errrrrr
  2. Correct terminology is standard capacity mags. And, yes it is.
  3. Used to be, now just a lump of melted steel. Glenn, I told you that 12 grains of Unique was a tad heavy for a 9mm - the tip-off should have been when you had to wet the powder and tamp it down to make it fit. I'm assuming this is Glenn's MANLY gun - his X-Frame in .500 S&W. Adios, Pizza Bob
  4. Not exactly. The exterior case dimensions are identical, the difference is that military brass (5.56x45) is thicker, thus reducing powder capacity and raising chamber pressure. However, even this isn't clearcut as SAAMI and NATO measure pressure using piezoelectric transducers located at different spots - thus causing an indicated pressure differential even with identical loads. The other difference between the two are the chamber dimensions. The 5.56 has a longer leade - the distance from the case mouth to where the bullet engages the rifling. OK to shoot .223 in 5.56 chambered guns. To err on the side of caution you probably shouldn't shoot 5.56 in guns chambered strictly for .223. I was surprised to see that RRA was using a 5.56 chamber on your gun. There is a third option (other than 5.56 or .223) called the Wylde chamber, which is kind of a compromise between the two and will handle either. RRA uses this (or used to) on some of their rifles. I have a RRA Varmint with a Wylde chamber that is a three-quarter MOA gun. Enjoy. Adios, Pizza Bob
  5. Yesterday I posted about an incident that happened at my local PD, posted here... http://njgunforums.c...misinformation/ So I started thinking that I may write to the detective involved and quote the relavent statutes (or just send him a link to these posts). I can understand the detective's error because in looking up the statutes I thought maybe I was incorrect (it could happen ). If you only go as far as 2C:39-5, b or c, it states pretty unequivocally that you must have a FPID just to be in possession of a handgun or rifle. If you stop there that would be the understanding you would take away from the it. However, you have to look further into the statutes, specifically to 2C:39-6,f to find the exemption for transporting to or from a range. OK, preaching to the choir here - hopefully we all know this. While poking around in the statutes though, I had to wonder if this couple wasn't in violation of other laws, given the purpose of their desiring FPID's. Their stated purpose was to transport air rifles to a youth organization's camp for use in marksmanship training. I see some potential problems with that - brought about by NJ's consideration of air rifles/spring powered BB or pellet guns as "firearms". 1) The couple are not the owners of the firearms, the organization is - couldn't find anything as far as transporting firearms not owned by the person(s) doing the transporting. 2) Temporary Transfer - actually two problems here: A) I'm assuming this camp is for children <18 YO, in which case a temporary transfer would not be legal; and, B) In the case of a TT, it says that the owner must be present or in close proximity for the duration of the loan. It specifically defines "owner" as a "natural person" not an organization. So even if A did not apply (maybe >18), B still would. I am further assuming that the "range" at such a camp is not registered with the NJSP which might disallow any exemption based on shooting at or transporting to a "range". Also doubtful that the shooting instructors would be certified by any of the organizations recognized under the law, which leads to more legal quicksand. I know a lot of this may sound like tinfoil hat time, but I'm wondering if that couple didn't have bigger worries than being misinformed about transport because of the draconian NJ Firearms Statutes. What say you? Adios, Pizza Bob
  6. So, I am in the lobby my twp PD waiting to turn in the paperwork for a couple P2P's when a couple comes in - already looking frustrated. They turn to me and ask if I've done this before and I reply, "Yes, lots". He is changing an address on his FPID, which he's never used and doesn't even know where it is, and his wife is applying for the first time. They tell me that they are getting them because they are involved with Boy Scouts or 4H or some such youth organization and have to transport air rifles, used in their camp activities. He ask me, point blank if it was true that they needed them. I replied, "No, it is a Firearms PURCHASE Identification Card" and is not required for transport (didn't even get into as long as you are transporting under one of the exemptions). I went on to tell them that the AG issued an opinion that it is advisable to have one when transporting, becuase it shows that you are not a "prohibited person", but it is not required by law. He harumphed and said they were told it was the law. I reiterated that that was incorrect. You can see this one coming, right? The LEO, one of two detectives that processes firearms apps, comes out from the back and the first thing out of the husband's mouth is the same question he ask me. To which the LEO replied, "Yes that is right, you need these to transport". I wasn't going to call him on it in front of these people - I do want to get my apps processed in a timely fashion, but it is just indicative of the battles we fight everyday. John Q Citizen who is new to firearms and the whole process is naturally going to ask the PD any questions. Look at what gunnarsport went through with his twp PD - remember when he refused to believe us that you could get more than one P2P at a time - because that's what the PD told him? It's a constant struggle with misinformation. The more I listened to this couple, the more amazed I was. This was their third time back, and they still didn't have the correct forms, the correct money orders, they had signed the mental health form with no witness, the whole ball of wax. Ever on the alert for an opportunity, I asked them that, if there was a service that guided them through the process, correctly, the first time, for a nominal fee, would they have availed themselves of it. They replied negatively. I had to bite my tongue to keep from pointing out that they had wasted more in gas, running back & forth four times, than such a service might cost. Just amazing. Adios, Pizza Bob
  7. Wouldn't look at CAPTBIL3's experience as being typical, but can certainly understand his current reservations. LCP sights? We don't need no stinkin' sights. Yes it has them, but they are vestigal at best. OTOH, this is a "Get the f*#k off me gun" to be used at point shooting or contact range. The sights are there, and they work, but they really are an afterthought. P238 has nice, real, sights. Valid criticism about cost P238 v LCP. P238 being all metal (a plus for some) is going to be heavier in your pocket. Speaking of pockets, the LCP makes a better pocket gun, being DAO. While a 1911 platform, condition 1 is my EDC (when I escape to the freedom of PA), not so sure that a cocked & locked P238 is comforting in one's pocket. The LCP hurts to shoot. I know it's only a .380, but it is only 9.4 oz. of blow-back design with but a nubbin to hang onto. Can't comment on the P238. I use a pocket holster with a flat "mask" panel for rear pocket carry of my LCP. Nice when nothing else will do (better the LCP in your pocket than the 1911 on your nightstand), but I prefer to carry a real gun. Just my thoughts. Adios, Pizza Bob
  8. The OP didn't know, but said that knowing the guy's tastes they were on the order of Weatherby's with good glass. In order to utilize 4473's or COE's - if the guns were even purchased in NJ, you would have to know where - who the dealer was - since both those forms reside with the selling dealer - not the NJSP or other agency.
  9. Pizza Bob replied to Krdshrk's topic in Handguns
    I thought that might be precisely what would happen - although I guess a case head separation would make more sense for an out of battery discharge.
  10. Pizza Bob replied to Krdshrk's topic in Handguns
    Pretty poor pictures. Maybe the gun fired out of battery?
  11. No troll. He posts quite a bit over on the PAFOA board. He came here to get the Jersey "slant" on things because that's where it all happened. Both boards have pretty much said the same thing although NJGF has been biased toward the illegality and PAFOA is probably weighted slightly more for the laissez faire approach, but the overall concensus on both boards is pretty much the same. Adios, Pizza Bob
  12. In order to qualify for LE/Mil pricing the gun had to be legitimately for duty use and they usually require something from the dept or unit commander on letterhead.
  13. The vendors - Glock & Sig - cannot dictate the selling price, but by specifying who their product is to be sold to, they can vary the price to the dealer. The dealer cannot buy the gun from Sig or Glock at the LE price and then turn around and sell it to a civilian at below what other dealers can compete with because they are paying "civiilain" cost. I don't know about Glock, but Sig actually has two separate sales channels. One deemed commercial and one deemed LE and military. Usually dealers are one or the other, there aren't many that are both - those that are, and are caught selling guns purchased under their LE/Mil program to commercial customers stand to lose their dealer status for one or both supply streams. If they want to sell guns at LE/Mil prices to civilians, that's fine providing they purchased the gun through the wholesale commercial channel. You also don't want to confuse "price-fixing" (dictating what their goods are to be sold for - illegal) with MAP - which is Minimum Advertised Pricing. This helps prevent the cheapening of the brand (so the theory goes) by not allowing anyone to advertise and item below a certain price. They are welcome to sell it for whatever they want - they just cannot advertise it below the MAP. Often you will see in an ad "call or e-mail for the special price", which tells you they are selling under MAP. Clear as mud? Adios, Pizza Bob
  14. I think it boils down to one thing - convenience, as pointed out by the scenarios in the preceding posts. It would work (not well) assuming the mag pouch is ahead of the holster and the rig is worn appendix to three o'clock (RH'd shooter). Once the mag pouch gets behind the point of the hip, your dead during the reload. Adios, Pizza Bob
  15. True, but it is, in effect, the whole process all over again. Fingerprinting or non-criminal background check, mental health check, references, the whole ball of wax. PITA. Adios, Pizza Bob
  16. Friday before the weekend show bump
  17. Break the tie with a Sig P226 CPO
  18. Fixed it for you.
  19. You weren't dry behind the ears, yet, back in '89
  20. You just don't like it cause it's NOT plastic
  21. Top Gun Supply has the part for $20 less than that link.
  22. There is an admission charge of $7 - but there is a $1 off coupon you can print out (link below). This show is rebuilding and is almost back to where it was. The shows were discontinued while the armory underwent renovations. It was supposed to take a couple months, ended up taking a year and a half, during which time a lot of the vendors went elsewhere. I believe this is the third or fourth show since they started back up again and it has been getting better each time. I like it because it is a decent show and it's close (to me). Here's the link: http://newsite.appal...nprintmode=true Adios, Pizza Bob
  23. Not going into the whole MIM thing other than to say there is good MIM and there is bad MIM. I also can't comment on Kimber's QC as I have no first-hand knowledge. I will say that I agree about their firing pin safety, but have to point out that it is NOT like the Colt series 80 firing pin safety. Colt's system requires that the trigger be pulled in order for the firing pin block to be lifted and allow total forward movement of the firing pin. It is a true third safety (manual safety, grip safety and FP safety). Kimber's firing pin block is lifted (deactivated) when the grip safety is depressed, which means, in essence, you still only have two safeties. Both these systems are giving way to the titanium firing pin/heavier firing pin spring system, which makes getting a good trigger pull much easier. In all these discussions about which 1911 platform to buy, I seldom hear anyone bring-up Sig. With the exception of the very early guns, which were problematic, I've heard a lot of good and very little bad about the Sig 1911's, and they are very price competitive with the likes of S/A, S&W and Kimber. Just my $.02 worth. Adios, Pizza Bob
  24. References are listed on the STS-033 and the PD is empowered to do an investigation. They do have some latitude and discretion, but most will do the whole deal again. I always try to use the same references. Good luck. Adios, PIzza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.