Everything posted by Pizza Bob
-
Savage Arms
I'll counter that advice with, don't write off the Savage just yet. Yes the Remington 700 is popular - that doesn't mean it's better. As for all the police etc that use them - often that's a case of just being the lowest bidder (same reason Glock owns the police market). Not taking anything away from the 700, just saying that there are a lot of BA .308's out there deserving of a look. The Howa 1500 (Weatherby Vanguard) action is described as being an advanced evolution of the Remington 700. Savage is known for accuracy which results from the fact that the headspace can be accurately adjusted by someone other than a skilled machinist (that ugly barrel nut does have a purpose other than ease of assembly). You will probably also find that Savages will carry deeper discounts - not necessarily cheaper, but deeper (dollar amount percentage off MSRP). Indeed the Remington is a good choice - but don't make that choice just because it's popular. Popularity does mean that there may be more accessories available - but if you are going to spend a ton on modding the gun, you may be better off to start with something like a Sako TRG, or the like. It will retain its value better than a modded gun. JMHO / YMMV Adios, Pizza Bob
-
Top Shot Returning!
They have supposedly addressed some of the criticisms put forth by shooters after the first season. Should make it an even more enjoyable watch. Adios, Pizza Bob
-
Looking for a .308 semi-auto
While I hate threads where the OP asks something specific and the responders all answer something other than what was asked, I'm afraid I'm going to have to plead guilty in this instance. Why not consider a nice .308 bolt gun? Less money, less prodigious use of ammunition and just as much fun. Be circumspect in your choices, stretch your budget a little and get both a 5.56 AR type AND a .308 bolt gun - then you will really be ready when the SHTF. Welcome to the forum. Adios, Pizza Bob
-
EFMJ in NJ?
It's just like all the NJ gun laws - vague and capricious. The tool & ballistics lab that the NJSP use has expressed to them that EFMJ, PowrBall and Hornady Critical Defense are not considered hollowpoints. A dum-dum in contemporary parlance is any expanding bullet. I'd like to know what led you to the inference that it meant armor piercing - quite the opposite. Does it really matter? As long as you are using them under the listed exemptions in the law, it's no sweat. If you're doing something illegal, that's a different matter. Adios, Pizza Bob
-
Hello
Greetings and welcome. Max mag capacity is 15 rounds (5 better than NY), so you can have a pistol that holds 15+1. Where did you get the idea you can't buy a pistol stamped Fabrique National? Adios, Pizza Bob
-
question from a new guy
Since Colt AR15 HBAR's are exempted, by name, does it matter if they have AR15 on the receiver, or other evil features?
-
Are mags interchangeable??
Depends on what they intend to do with them. If they are going to "game" with them (USPSA / IDPA / Steel, etc.) then, yes, the more mags the merrier. If it is a SD/HD gun them two might be enough, but three would still be better. Don't try shooting 9mm out of the .40/.357 mags. You should have no problem selling them in short order. Adios, Pizza Bob
-
NJ Legal Muzzle Brakes?
There is no definition of what constitutes a flash-hider vs. a muzzle-brake / compensator in NJ law or the Admin Code. The BATFE won't weigh in on this since the Federal AWB is no longer in force, so the issue is moot. Commonly accepted differences between the two would be, as was pointed out earlier, a closed end - that is an end with a hole only large enough to alow the projectile to pass through - denoted a brake/comp, while an open end denotes a flash hider, or something other than a comp/brake. Adios, Pizza Bob
-
NJ Legal Muzzle Brakes?
Tin foil hat time, but I think I'd be careful about brakes/comps that can have a suppressor installed over them (usually by means of an Acme thread). Since the brake/comp is permanently pinned, it is considered part of the barrel (which is why you can take a 14.5" barrel and permanently install a 1.5" brake/comp and be NFA legal) - so you are now back to having a "threaded barrel". Just my usual paranoia. Adios, Pizza Bob
-
Are mags interchangeable??
What difference does it make if they fit anything else? There are thousands of Sig P226's in .40 S&W & .357 Sig out there. Sig just handed you a minimum of $75. The mags work in any P226 chambered for .40 S&W or .357 Sig. Put an ad in the classifieds here or PAFOA - but your best bet is on Sig Forum - They'll get snapped-up. Just FYI, it takes awhile to become a member on Sig Forum and they may have a minimum post rule before you can offer for sale. As an alternative to selling them, you may want to offer a trade deal for 9mm P226 mags. Adios, Pizza Bob
-
Lets say NJ passes CCW .......
Already carry when I'm over the border - Sig RCS (CCO 1911) in a VM II.
-
Shipping a rifle
First, you do not have ship it in a case. Anything you purchase just adds to your shipping expense. I'm a cheapskate and here's what I did. Go to your local bicycle store and ask for a bicycle box. Lots of raw material there. A utility knife and a hot glue gun and you can build a box to your spec. I did a box with a separate lid, so the ends and sides were all double thickness with the lid on. I also used a flat pieces in the top of the lid and bottom of the box to give me double thickness there. You can glue in supports to hold the gun where you want it (wrap it in bubble wrap first). I then used fiber reinforced strapping tape to hold the top and bottom closed. It could have withstood a direcrt thermonuclear bomb hit when I got done. Good luck. Adios, Pizza Bob
-
Supporters promote "Call to action day" to free Brian Aitken
I think the way we were told to disengage could have been a bit more diplomatic, and if it came from his attorney, it should have been Evan that asked us. On that point, I have hard time believeing that this originated with Nappen. What I could surmise is that a Christie politico came to Nappen and said we really don't want people focused on these 2A issues right now. If you want to "enhance" your client's chance at a pardon, you'll quash all of this pro-gun hoopla. I would imagine Evan is no stranger to politics, and I think that may be what we're seeing here. OK, I'll go put my tin-foil hat back on. Proceed. Adios, Pizza Bob
-
'Tis the Season...
You don't have to hit me in the head with a (snow) shovel. When I looked outside this AM and saw those little white flakes and then watched while they proceeded to accumulate, I decided I had postponed the tire changeover long enough. We have a lot of car guys (and gals?) on here and I was just curious - How many of you have your snows (or whatever you use in the winter) already mounted on wheels? With the preponderence of front wheel drive, how many change all four? Of those of you that have separate summer/winter tires/rims, how many change their own? I just got done. Even though my car is RWD I change all four tires to all-season tires. I run larger (19" vs.18") high performance summer only tires from about April 'til now. I wouldn't let a tire monkey with an air wrench near my car, so I prefer to do it myself. That way I make sure they are properly mounted and torqued - and yes, I am wrapped a little too tight. So how many on here are DIY'ers? Adios, Pizza Bob
-
what gifts did you get for you significant other ?
Gotta be an ulterior motive there - shooting that day, are we?
-
Gift for a Corvette owner
Ha, interesting that you should mention that - I wasn't aware there was a general problem, but I have had the slave cylinder replaced, but that was some time ago.
-
No More Discounts
Might be able to squeeze something in - but I do have to allow time for Christmas shopping and my mother & sister are coming Thursday, for the holidays. Also have to get the dog groomed on Thursday. Maybe the week between Christmas and New Years might be better, but tell me what's good for you. Adios, Pizza Bob
-
Gift for a Corvette owner
I beg to differ. I have 17.5 cu. ft. of trunk space and can comfortably accommodate four people - five if they're friendly. But I take no offense, I still have my first mid-life crisis car, a 1990 Z51 - but it pretty much just sits in the garage now. I can get my kicks with my EDD, my G8-GT. BTW, the Lloyds mats are a good idea. Adios, Pizza Bob<-----Cars & guns....gotta love em
-
No More Discounts
CP is indeed a nice facility - both the range and the shop and Bob the owner is a good guy. I did a quick Google maps, just using Flemington as the origin and Southampton as the destination and came up with appx. 32 miles and about 53 minutes travel time. There is another indoor range/store in Bristol, PA called Ready, Aim, Fire and the numbers for them (again, just using city centers) are 37 miles and 55 minutes travel time. It has been awhile since I've been to RAF, it's a nice facility, but I'd have to give the nod to CP. Anytime you want to do the "tour" or go shooting, let me know. Adios, Pizza Bob<----Literally, a stone's throw from freedom
-
Sig p226 e2 vs elite black
You have now been infected with the Signess.....you can never have just one Enjoy!!
-
Bushmaster Firearms Maine Factory To Close
You seem to be laboring under the misconception that Bushmaster is going away. The article says that will retain the brand, they're simply closing one manufacturing facility and moving production to other plants within the group. Adios, Pizza Bob
-
Another question regarding handgun permits from a new NJ resident
That's strictly a matter of perspective
-
Sig p226 e2 vs elite black
I looked at those specs and passed right over that. Guess I didn't want to see it?!!? I stand corrected.
-
Another question regarding handgun permits from a new NJ resident
I see the emoticons, but I think that was a bit over the line, Nick. I don't need to defend Stephanie, she can give as good as she gets. Maybe I'm just like Frank and a bit "Old School".
-
Sig p226 e2 vs elite black
MrP - not that I doubt you (well I do, I guess), but since the Short Trigger and the Short Reset Trigger both have the trigger itself as a component - at least when doing retrofits - I don't think Sig makes a trigger that is both. Yes, the distance from the backstrap to the trigger face will be less when the trigger resets than a standard gun, that's due to the grip confguration. The Elite series has the SRT standard. I don't know, my head is about to explode.....show me something in the specs or other written data from Sig and we'll go from there. Adios, Pizza Bob