Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. ...hence the face palm
  2. Big Hayden said it all. +1 Why would you want to support gun-free zones, that ultimately can become killing fields. Some of these responses sound like the typical anti drivel. "Only the police have enough training", "What if someone took the gun away", etc. etc. Why would you restrict a teachers or administrator's right to self defense, or the defense of your children? Haven't we learned our lesson yet? How many more school shootings does there need to be before we see the wisdom of having countermeasures on-site, rather than rely on LE and the amount of time it takes them to react. Some of you have been drinking the kool-aid too long. Ohhhhh, I understand, it's for the children. Adios, Pizza Bob
  3. I have a friend with an EAA Witness in .45 ACP that was purchased some time ago. It came with three magazines. All three mags had a small wire around the body of the mag about .75" up from the base. One of the wires came off and is lost and when used without the wire all kinds of feeding malfunctions occur. The mags with the wires work fine. If he grabs the base of the non-wire mag and exerts downward pressure (like he's trying to pull it out of the gun) it functions fine. Speculating here - the mag latch is what should locate the mag vertically within the mag well. I'm wondering if the slot cut in the mag, to engage the mag latch, is too tall which allows the mag to ride too high in the well, with the resulting misfeeds. Thought the wire may be exerting downward pressure on the mag to keep it engaged against the top of the slot in the mag. However, for that to happen, I would think there would have to be something for the wire to bear upon in the mag well, like a step. Such is not the case - all smooth inside the well. It does appear to taper, so maybe it is just an interference fit. New mags both from EAA and from Mecgar have no such wire. Just wondered if any of you have seen this, or encountered this in your travels - or maybe even own one of these. They are CZ clones. Maybe EAA initially used CZ mags and their (EAA / Tangfolio) specs were off slightly and they had to "band-aid" them to function properly. Here's a pic... He has written EAA, but nothing forthcoming as yet. Thanks for any input. Adios, Pizza Bob
  4. A newbie posted a question over on PAFOA (I directed him here). In his question, he stated it as fact that local municipalities can legislate gun issues - in other words, no state pre-emption. I never really gave this any thought. I've been all over the gun statutes and administrative code, but don't recall ever seeing anything about pre-emption. Do we have it, or are we at the mercy of the legislative bodies of the 500+ municipalities in this state. That could result in a crazy patchwork of laws that one traveling in the state could never hope to comply with. What say you legal beagles? Adios, Pizza Bob
  5. That's what I like about you, you're such a "glass half full" kinda guy
  6. Bushnell is either discontinuing or revamping its Elite 3200 and 4200 lines (I would bet they'll become 3500 and 4500 to be more in line with the newest line, the 6500) and there are closeouts offered on those two lines. If SWFA isn't offering closeout prices, check Natchez Shooter Supply. I really like the glass in the Elite series. Not sure if they make a shotgun specific scope, but it's worth a look. Good luck. Adios, Pizza Bob
  7. There is a grandfather clause. OK everybody, lets all rush out now and buy all the large capacity ammunition feeding devices we can, before the ban. Even the MSM has pretty much said that any gun control legislation attempted in this congress is going nowhere. Doesn't mean we don't have to be vigilant, but let's not over-react. Adios, Pizza Bob
  8. Not quite right. It exempts .22 rimfire. Other tube-fed lever-actions would, like everything else, be limited to ten rounds. Could be a problem for those lever actions chambered for handgun rounds. There is already a NJ sponsor on board - Rush Holt. Don't think this is going to get much traction. Just trampling in the blood of Tucson to further their political agenda. No laws are going to stop a mentally unbalanced person. It's the price we pay for living ina free society - although these folks are attempting to change that - the "free society" part I mean. Adios, Pizza Bob
  9. Call Kel-Tec and see if they'll give you shipping label (return it on their dime). If that isn't possible, box it up and take it to UPS or FedEx. You have to go to a hub, franchises and branches won't accept it. It has to be shipped 2 day or next day air and you have to declare that it is a firearm. If you have to pay return shipping you may want to look at having your FFL ship it to them (PA or NJ FFL - doesn't matter) as they are allowed to use the USPS and often the price of shipping plus their fee will be less than air shipment with UPS or FedEx, if you do it yourself. It can be returned directly to you after repair. Be careful, because often they don't even require an adult signature and they will just leave it on your porch - happened to me with UPS and a S&W 624. If it would have to be replaced, and they won't stamp the new frame with your original serial number, then it may have to go back to an FFL and you'll have to jump through all the hoops. I am not 100% positive about this part of it. Make sure that it is adequately insured, regardless of how you ship. HTH Adios, Pizza Bob
  10. Probably the electrical contacts in the TV camera
  11. Chris: I believe he was speaking of the Target version, not the tactical. That is not a compensator, it is a barrel tuner - it moves to change the barrel harmonics. It moves by virtue of a threaded barrel, but without a pistol grip or baynet lug, you should be GTG, providing you get mags of the proper capacity (<16). On the Tactical, if that is a flash hider, you would have to have to P&W'd since the threaded barrel and the FH = 2 evil features. And, of course get the <16 mags. Adios, Pizza Bob
  12. Read the profiles of the plaintiffs in the SAF/ANJRPC suit against NJ and then tell me again if you think your wife has a chance.
  13. No COE for a handgun. The PP takes the place of that.
  14. I assume that you are talking a long gun, since a handgun requires an additional permit. No waiting period. One federal form (4473), and one state form (Certificate of Eligibility - COE) to fill out and then a NICS check (@ $15) and you're GTG. Adios, Pizza Bob
  15. Bill, we're aware of the BATFE's stance on this - there is none, since federally, airguns are not considered firearms. Different story here in NJ where they are considered firearms and where suppressors of any kind (add-on or integral) are illegal - that is why they are a no-go in NJ. Would have to disagree with you on the noise. These are relatively high velocity air guns and as such generate quite a bit of noise upon discharge, well beyond any spring noise. The Whisper is pretty effective in mitigating (not eliminating) this noise. I know a local FFL who had a visit from the NJSP and when they saw one of these in his rack, was told he couldn't sell it. He notified Gamo and after going round & round with them, was allowed to ship it back. This is probably how Gamo became aware of the prohibition. Adios, Pizza Bob
  16. This is exactly the question I put forth when I was asked (indirectly) for an opinion by a lawyer defending a case. I could find no definition in the statutes as to what constitutes a telescoping stock as opposed to just an adjustable one. Is there a defined amount of fore / aft movement that differentiates adjustable from telescopic? Nobody knows since it isn't defined. The original AWB was predicated on evil appearance, not substance. Any prohibition of telescoping stocks should be based on whether in the collapsed position the firearm falls below the NFA minimum length of 26" (JMHO). Adios, Pizza Bob
  17. If you are a resident of a municipality with an established police department, then you must apply there. The NJSP will direct you to your local PD. 2C:58-3 d.Issuance. The chief of police of an organized full-time police department of the municipality where the applicant resides or the superintendent, in all other cases, shall upon application, issue to any person qualified under the provisions of subsection c. of this section a permit to purchase a handgun or a firearms purchaser identification card. HTH Adios, Pizza Bob
  18. A couple of other ways to attack this, that I found in the Administrative Code... NJAC 13:54-1.14 Limitation on Fees No fees, other than those established by this chapter or law, shall be assessed or charged to any person by any governmental entity of this State for the processing of applications, or for the proper investigation of applicants for licenses, permits, cards and registrations in accordance with the provisions of this chapter. Since a notary is licensed by the state, are they not a "governmental entity". Even if that's a stretch, the requiremnt of notarization is at the behest of a "governmental entity". and... N.J.A.C. 13:54-1.15 Confidentiality of background investigations, permits, firearms identification cards, licenses, certifications, certificates, forms of register, registration statements and applications Any background investigation conducted by the chief of police, the Superintendent or the county prosecutor, of any applicant for a permit, firearms identification card license, or registration, in accordance with the requirements of this chapter, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such investigation, including the applicant. Any application for a permit, firearms identification card, or license, and any document reflecting the issuance or denial of such permit, firearms identification card, or license, and any permit, firearms identification card, license, certification, certificate, form of register, or registration statement, maintained by any State or municipal governmental agency, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such documentation, including the applicant, except on the request of persons acting in their governmental capacities for purposes of the administration of justice. Is not the sending of reference letters, letters to employers or letters to spouses a violation of confidentiality? The potential "out" for the PD in this clause is, what exactly is "...their governmental capacities for purposes of the administration of justice."? Regardless, as I pointed out previously, all these extraneous forms violate 2C:58-3,f. Mcbethr, what you are espousing is a slippery slope and it's thinking like this that has led us to where we are today. The "background check" should be a NICS check, period, end of story. Generally more comprehensive and up to date than any "investigation" a local PD is going to muster. As for spousal employer notification (I know you didn't include "employer", but it is fruit from the same poisonous tree), it is nobody's business, but mine (and under NJ law, by necessity, the police) that I am purchasing a firearm. Adios, Pizza Bob
  19. Nice that everybody is exchanging info on what they ride, but the question hasn't been answered, yet. IANAL but, going through the statutes, all I could find was this... 2C:39-6 g.All weapons being transported under paragraph (2) of subsection b., subsection e., or paragraph (1) or (3) of subsection f. of this section shall be carried unloaded and contained in a closed and fastened case, gunbox, securely tied package, or locked in the trunk of the automobile in which it is being transported, and in the course of travel shall include only such deviations as are reasonably necessary under the circumstances. Since the word "or" is used between the conditions of carry, you should be good to go. I thought I remembered a clause somewhere that dealt with vehicles without a trunk. I went through all the statutes and the NJAC and could find nothing else. If someone remembers, or can find, that definitive clause please post it up. Adios, Pizza Bob
  20. OK, I had my fun with you - sorry, but I couldn't resist. A search from LWRC's website reveals this... Auto Parts of Woodbridge - Woodbridge, NJ Phone: 732-634-6264 Email: [email protected] Parts of Woodbridge Woodbridge, NJ Brick Armory - Lakewood, NJ Phone: 732-364-3500 Email: Brick Armory Lakewood, NJ Bullet Hole Inc - Belleville, NJ Phone: 973-759-3968 Email: [email protected] Hole Inc Belleville, NJ Caso's Gun-A-Rama - Jersey City, NJ Phone: 201-435-5099 Site: http://www.casosguns.com Email: [email protected]'s Gun-A-Rama Jersey City, NJ Shore Shot Pistol Range - Lakewood, NJ Phone: 732-539-3441 Email: [email protected] Shot Pistol Range Lakewood, NJ Several site sponsors among them. Pick the closest and give them a call about what is available for NJ. HTH Adios, Pizza Bob
  21. ahhhhh......neutered? Or are you just a very caring person
  22. Paul: It is the actual letters, however the notarization imposes an additional condition. This is particularly onerus because now either the applicant or the reference are liable for additional costs. It is just another step across the line and I just think maybe it's time we pushed back. Adios, Pizza Bob
  23. I hesitate to say this - probably just because of the intrinsic NJ Indoctrination that occurs after living here 33 years - but it looks like you'd be OK. The only reference I could find was in the definition of an assault weapon in the Administrative Code, which says this... ii. A semi-automatic pistol that has an ability to accept a detachable magazine and has at least two of the following: (1) An ammunition magazine that attaches to the pistol outside of the pistol grip; (2) A threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer; (3) A shroud that is attached to, or partially or completely encircles the barrel and that permits the shooter to hold the firearm with the non-trigger hand without being burned; (4) Manufactured weight of 50 ounces or more when the pistol is unloaded; and/or (5) A semi-automatic version of an automatic firearm; Since the threaded barrel would only be one evil feature it would seem that you would be good to go. Others please chime in if I'm misinterpreting something - easy to do with NJ's firearms laws. However, since suppressors are illegal, what do you intend to mount on your threaded barrel? Adios, Pizza Bob
  24. If you save your magazines (the printed kind) find a copy of The American Rifleman where the Taurus Judge was tested. The article occupies the center spread of the magazine. On those two center-spread pages is a gigantic blow-up of the rear of the open cylinder - the rachet on the extractor star looked like it was machined using a rabid beaver. Tool-marks doesn't even begin to cover what that looked like. Totally turned me off to Taurus. There is no question that S&W's are of better quality and have better maching. That may not affect the functionality of the Taurus whatsoever, on the other hand... Lots of people have them, lots of people swear by them. Some swear at them - that's what makes this a great country, you have a choice. Me? I choose S&W over Taurus everytime, but that's just me. YMMV. Adios, Pizza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.