Everything posted by Pizza Bob
-
Bolt Action 22LR
Wolfy: To address your other question, vis-a-vis the .17M2, I think it's a great caliber and out to about 100 yards, every bit as accurate as my hummer. However, there are a very limited number of makers who still chamber for this round. I believe CZ dropped it this year. There are only two current ammo makers Eley & Remington and I think Remington is buying its primed cases from Eley - so in reality there is only one. If you are willing to accept the possibilty that the caliber may go away completely, at some point in the future, then it's a great little caliber. Even with the exclusive Eley/Rem have on the ammo, it is about half the cost of hummer. I bought mine when ammo and makers were much more plentiful, but the writing was on the wall, and I always figure I can have it rebarrelled to .22 rimfire if need be. In the meantime I stock-up on M2 ammo - so I'm set for a while. Good luck with your decision. Adios, Pizza Bob
-
$500 CCW - would you?
I can't believe how many people on here are willing to pay to exercise a constitutional right. Would you pay $500 to be able to exercise free speech? How about to attend the church of your choice? What gives NJ the right to use our rights as a revenue generator? I can understand nominal fees to cover expenses - but we already do that with NICS, FPID, P2P etc, etc. What more are we going to put up with in order to be able to defend ourselves? Even $500 for five years is ludicrous, but the bill states that's the proposed annual fee. I think too many people have been drinking the NJ kool-aid for far too long to think that this scheme, by the tax & spend dumbocrats, is OK. Oh boy, look, they're going to let me exercise a right and it's only going to cost me $500 per year. Wake-up and get real. Talk about slippery slopes. JMHO Adios, Pizza Bob
-
USPSA @ Old Bridge 9/26
OK, First, the excuses: 1) I got zero sleep the night before 2) The reason I got zero sleep was that I was in a great deal of pain with a possibly abcessed tooth (it has abated considerably today, but plagued me all Sat night and throughout the day Sunday) 3) I'm old , I'm fat and I'm slow 4) Because I'm old, I forgot to take any painkillers on Sunday morning before I left the house Here's how it went: The plan was to head out about 7:15 AM. I had all my gear packed and ready to go. I knew that this was going to be an all day affair, so I took a cooler with two Pepsi's (caffeine free diet - yeah, I know - colored water) and one Starbucks Frappacino (figured I'd need an afternoon boost). I intended to stop at a Wawa and get some breakfast and fill-out the cooler with three waters - hydration being important. Figured I could also get some kind of painkiller there. Didn't happen. There are no Wawa's on the entire stretch of Rt 1 and then Rt 18 on the way to the match. I only saw one convenience store on route 1 (A Hess station, ironically enough), but was by it before I realized it was more than just gas. So, no food, no water, no painkiller. Maks did come to my rescue with half an egg sandwich - which is all I had until about 6:30 that night. Got there at a little after 8 AM and went to work helping with set-up. Registered (well, confirmed - you register on-line) and went through the newbie thing. A bunch of us from NJGF got squaded together. Let me say that the people that put on this shoot are serious. They have been at this for ten years, and they know what they're about. The stages were amazing in their complications and intricate builds. Walls, portals, steel, paper, specific shoot zones and free fire zones - it was amazing to realize this was all set-up that morning and torn-down that night. I don't know what the total round count was, but it had to be close to 200. There was also a record turnout - something like 84 people and there were seven stages. There were a large number of newbies and unclassified people at one end of the scale and J. J. Racaza (of "Top Shot" fame) at the other end. We started a little after 10 AM and were all done shooting (and largely torn-down) by 4 PM. Amazing efficiency. Adding to that efficiency was the technology they used. Even though a true "techie" would consider it dated, it worked very well - they used Palm Pilots at every stage for score keeping. These could all be dumped into a computer and the numbers crunched so that there are actually results published today. This was probably a bit ambitious, for me, as a return to the "game" (and it has gotten waaaaaaaay gamier since I did it last) and given the excuse list, I enjoyed it far more in retrospect than during the course of the action. If I were young, fit and properly provisioned for the day, I would have enjoyed it much more. I should have known better. That's not to say I won't continue down this path. It's just that now I know better what to expect. I may try some of the other clubs with less ornate and taxing set-ups (more like what I was used to 23 years ago, I suspect). I would have enjoyed this one a lot more if I wasn'y hungry, dehydrated and in pain ("Other than that, how did you enjoy the play, Mrs Lincoln?"). But it was a day on the range, with great people all doing something we love - shooting. All right, so how'd I do you ask? The quick answer: I finished 69th out of 84 in the overall standings. I finished 21 out of 26 in class (production). Certainly far from stellar results, but given all the above, I was relatively pleased with the way I shot. Given that I did have some experience in this arena, I intentionly avoided the mistake that most newbies make - trying to shoot too fast. In fact I was at the other extreme, shooting slowly and deliberately. It cost me, but as they say, "You can never shoot fast enough to make up for a miss". I only incurred two penalties for the day (damn hostages, don't they know enough to get out of the way?), and believe that I got all my hits (although not 100% positive about that) - just very slowly. Part of the slowness was not due to shooting ability, but more due to being old & fat & sick (see above). I will say that I was very, very pleased with the way my gun ran. Absolutely without a flaw and far more accurate than I - it was a joy to shoot that gun. I was shooting a Sig P226SL in 9mm. I originally bought this gun for "games" and it was a pleasure to see my decision justified. There were a lot of malfunctions in our squad - although to be fair I believe they were mostly ammo related (although one has to ask, would these rounds have functioned in a different gun? Just how gamey are we getting? I suspect a number of lightened mainsprings) focusing around failures to feed and failures to fire - most often attributed to "...those damn Wolf primers...". I got home, barely made it up the basement stairs, from the garage and, literally, passed out on the couch (after availing myself of several ibuprofen). Woke up at 6:30, feeling somewhat human, fed the dog, fed myself (happy day) and attempted to stay awake for Boardwalk Empire (successfully) - hit the sack at 10 and slept like a rock through the night. That was my day. Adios, Pizza Bob
-
US Economy (not political)
My eyes!
-
Sig Gadsden Limited Edition
One of the vendors had one at VF. Doesn't do it for me.
-
S&W .45ACP
Glad to be of help. One clarification - the Thunder Ranch model 22 is just what I said - pretty much a standard model 22 with TR logos. However, there is also the model 325TR. Clint Smith supposedly had some input on this gun. It was built by the S&W Performance Center and the most interesting feature was a removable, under-barrel tac-rail. Good luck in your search. Night Guards and 625's will probably be pretty plentiful. Original 25's not so much, although I believe this is also one of the models re-introduced under the Heritage program. Adios, Pizza Bob
-
S&W .45ACP
What it is is explained in the first paragraph of my liturgy - but what makes a Thunder Ranch version is simply the stamping of their logo on the grips and the gun. When they first re-introduced the 22, the only way you could get it was as the Thunder Ranch special edition. Later they introduced a whole line of "Heritage Models" in plain configuration. The 22 was popular enough that it made the cut. The 22 was the descendent of the Model of 1917 (although that had a longer barrel) which is also available as a Heritage Model. Adios, Pizza Bob
-
S&W .45ACP
There are more than just those two .45 ACP/AR S&W's. The model 22 is a Heritage model and is a reprise of the Model 1950 Army. It's a 4" tapered barrel with an ejector rod shroud. Fixed sights (notched top-strap rear and half-moon front). The 325 has been made in various iterations, including the most recent, the 325 Night Guard. The "3" designates that this is a lightweight, scandium alloy frame. There was a 325 PD and a 325 TR IIRC. There are also the model 25 and the model 625. The 25 is also known as the Model of 1955. This model harkens back to the day when Bullseye (2700) was shot with revolvers, not semi-autos as it is today. The rimfire stage was shot with the K22 Masterpiece, the centerfire stage with the K38 Masterpiece and the .45 stage with the model 25 - or model of 1955 (model numbers didn't come into being until 1957). The model 25 is one of the finest revolvers you can own. The 625 is the stainless version - although it departed from the 25 significantly in its configuration. Initially, it had a 5" barrel with a full underlug and was called the Model of 1988. That only lasted a year and the barrel was then laser engraved (the 1988 model was roll-marked) with Model of 1989 and was offered with a 4" barrel. You may be able to get it with either today, not sure - but if you are going to use it for IDPA, it has to be 4". These guns all got new life breathed into them with the invention of the moon-clip. Prior to that you either used .45 Auto Rim and loaded singly or with a speedloader, or you had to use half-moon clips filled with .45 ACP's - two to a cylinderful. The half-moon clips fit on the outside of the cartridges, whereas the full-moon clips fit on the inside. Half-moon clips slow the loading process since you have to insert two of them - faster than singly, but not much. The full moon clips made loading faster than with regular rimmed revolver cartridges and a speedloader - no knobs to turn or push, the whole unit goes into the cylinder. That was a boon to the action games and one only has to witness Jerry Miculek shoot a model 625 to realize how fast one can be with a revolver. Depending on which engineering change number follows the model number (25-2, 25-3 etc) some model 25's and 625's were chambered for .45 Colt. The first being the 25-3, which was a comemmorative and then the 25-5. The 25-5 you want to stay away from, if you are harboring any thoughts on getting one in Colt, rather than ACP, unless you have the chance to actually measure the cylinder throats. S&W really screwed the pooch on this one, manufacturing the barrel and forcing cone to post-war specs and the cylinders to pre-war specs - resulting in shotgun pattern accuracy and keyholing. Probably more than you ever wanted to know about S&W .45 ACP revolvers, but they are some of my favorites - I have a 25-2 and a 625-2. BTW, all the Smith .45's are built on the N-Frame - which was the largest until the X-rame came along recently. HTH - any questions, you know where to find me. Adios, Pizza Bob
-
US Economy (not political)
Let me get this straight, we have a CFO admitting to tax evasion on a public forum, and rationalizes it by saying everyone does it? Kind of a broad brush, isn't it? IRS are you listening???
-
World's Scariest job?
While not as scarey as the link Maks posted, still something that made the hairs on the back of my neck stand-up. I have a friend who owns a company that makes metric hydraulic fittings and metric to SAE adapters. He has two major markets - the imported medium duty truck market and carnival rides, many of which are imported. This goes back aways (pre-e-mail) I was at work when he faxed me some photos he had taken. He was a supplier to the manufacturer/installer of the roller coaster at the top of the Stratosphere in Las Vegas. He was out walking around on the temporary, timber scaffolding that would become the path for the tracks of the coaster. Just unreal. On a sidenote, they tried to stiff him for $20K. Turns out in Vegas you can place a lein on property for $15 court costs (at least you could then). His lein had to be satisfied before they could open the Stratosphere. Adios, Pizza Bob
-
USPSA @ Old Bridge 9/26
I'm going to try again this month. Weather forecast looks ideal - slight overcast with highs in the low 70's. Will get there early. See you all at the match. Adios, Pizza Bob
-
Reloading for a M1 Garand
Are small-base dies still recommended for ammunition being used in semi-auto firearms? Anybody had any issues using just regular full-length dies? Are small-base dies even still offered? The people want to know.
-
Why no lead on polygonal barrels?
KB's in Glocks are more often caused by the unsupported chamber than any use of lead bullets. Ask Roger at Kings (in KofP, PA), maker of Roger's Better Bullets about how many rounds, loaded with cast bullets, he has fired through his Glocks. Not sure how polygonal rifling is more prone to shave lead - the transitions around the "corners" are smoother than regular rifling with lands & grooves. Any firearm, regardless of rifling type, can KB from overpressure if there is extreme leading. The trick is to use an alloy harder than pure lead. If you use the big bullet manufacturers (Hornady, Speer etc) swaged lead bullets, that is exactly what you are getting - pure lead. Even driven moderately fast, these will lead any barrel. Most cast bullet makers use alloys of lead, antimony and tin in various proportions, depending upon the desired hardness. Some cast bullet manufacturers will actually give you a Brinell hardness of their bullets. Don't fall into the trap of just getting the hardest bullet you can find - as they get harder, they get more brittle and they won't obdurate to the rifling (of any kind). Examine your barrel and clean accordingly. IMHO, the no lead in polygonal rifling is more hype than fact - just know what you're feeding your glock and clean accordingly. YMMV Adios, Pizza Bob
-
moving from wi to nj
Saw your post over on PAFOA also. Some misinformation there - not saying this will be any better - NJ tends to leave a lot of "wiggle-room" in the writing and interpretation of their firearms laws. 1) You can just bring your guns with you (providing they are NJ compliant) - there is no registration in NJ 2) IANAL - but depending on the degree of the offense, this may preclude you from owning guns, period! Will definitely have an effect on getting an FPID 3) No, you still have constructive possession 4) Except in the case of varmints which can be hunted with a rifle - but it would seem that you have more immediate problems. 5) Don't know if there even are any laws regarding Bows PA is a great state for hunting and their non-resident license is not all that expensive (all thing considered). However, the SE corner of PA is a shotgun only zone - keep that in mind. I'd worry about #2 and make sure that is cleared-up before I'd even think about bringing any weapons into this state. JMHO, hope you hear from others that are more schooled in the law than me. Adios, Pizza Bob
- 575
-
Glen Outdoors Ammo Sale
If you buy a case lot (10 boxes / 200 rounds) you can drive to Tanner's in PA and buy for $190 to $200 (check on GB under seller: Ray Tanner for current pricing) Adios, Pizza Bob
- 575
-
how many of you there got snubbies?
Mine has proven to be fine. It is an original, purchased around 1988. There are those on here that have not had such great luck with CA, but I can't say if that is a reflection on the current CA entity, or just that specific firearm. Due to the light weight and the big bore, it can be somewhat painful to shoot - moreso than my 638. 1988 well predates the availability of good .44 spl SD ammo and I always used 6.0 grs of Unique behind a LSWC. That was down 1.5 grs from the .44 spl load I used in my full sized .44 spls (S&W N-frame), and it still hurt. Hope you make out OK with your choice. Adios, Pizza Bob
- 575
-
Boardwalk Empire
Because Asbury Park turned them down. More lost revenue for NJ.
-
Another day on the choo choo
New Hope and Ivyland - right Glenn? I'd come see you if I knew when you'd be there - you're only about 6 miles up the road and across the river. Adios, Pizza Bob
-
Boardwalk Empire
Good guess. In the scene, close to the beginning, where they were talking about the G-men and showed them shooting at the range - they were using model 10 HB's, which didn't exist until 1957. Should have been M&P .38 spls the precursor to the model 10. Great show though. Only an anally retentive firearms obsessed person would notice that. Adios, Pizza Bob
-
Boardwalk Empire
Looks like HBO has another winner on its hands. Caught the premier last night and I'm chafing at the bit for next week's episode. I think I saw one anachronism (I'll have to watch it again to make sure) - before I say what I think I saw, did anyone else catch anything? Keep in mind if it's on this forum, it is firearms related. Wolfy I would expect you to get this, if you watched it last night. Is Michael Pitt Brad's brother? So what did everybody think? Discuss. Adios, Pizza Bob
-
Custom Knife -Functional Art
Glad to see you have your priorities straight
-
Any successful Pro Se Expunctions here in regards to obtaining FPIC?
Shane: I believe that from a legal standpoint, once it is expunged, it is as if it never happened, thus could not, theoretically, be used for grounds for rejection. It allows you to legally answer "no" to the "Have you ever been convicted....?" questions. Adios, Pizza Bob